You limited your search to:

  Partner: UNT Libraries Government Documents Department
 Decade: 1930-1939
 Collection: National Advisory Committee for Aeronautics Collection
Aerodynamic characteristics of a 4-engine monoplane showing effects of enclosing the engines in the wing and comparisons of tractor- and pusher-propeller arrangements

Aerodynamic characteristics of a 4-engine monoplane showing effects of enclosing the engines in the wing and comparisons of tractor- and pusher-propeller arrangements

Date: April 1, 1938
Creator: Wilson, Herbert A , Jr
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Aerodynamic characteristics of a large number of airfoils tested in the variable-density wind tunnel

Aerodynamic characteristics of a large number of airfoils tested in the variable-density wind tunnel

Date: January 1, 1938
Creator: Pinkerton, Robert M & Greenberg, Harry
Description: The aerodynamic characteristics of a large number of miscellaneous airfoils tested in the variable-density tunnel have been reduced to a comparable form and are published in this report for convenient reference. Plots of the standard characteristics are given in tabular form. Included is a tabulation of important characteristics for the related airfoils reported in NACA report 460. This report, in conjunction with NACA report 610, makes available in comparable and convenient form the aerodynamic data for airfoils tested in the variable-density tunnel since January 1, 1931.
Contributing Partner: UNT Libraries Government Documents Department
The aerodynamic characteristics of a model wing having a split flap deflected downward and moved to the rear

The aerodynamic characteristics of a model wing having a split flap deflected downward and moved to the rear

Date: May 1, 1932
Creator: Weick, Fred E & Harris, Thomas E
Description: Tests were made on a model wing with three different sized split trailing-edged flaps, in the NACA 7 by 10 foot wind tunnel. The flaps were formed of the lower rear portion of the wing and were rotated downward about axes at their front edges. The lift, drag, and center of pressure were measured with the axis in its original position and also with it moved back in even steps to the trailing edge of the main wing, giving in effect an increase in area. The split flaps when deflected about their original axis locations gave slightly higher maximum lift coefficients than conventional trailing-edge flaps, and the lift coefficients were increased still further by moving the axes toward the rear. The highest value of C(sub L max), which was obtained with the largest flap hinged at 90 per cent of the chord from the leading edge, was 2.52 as compared with 1.27 for the basic wing.
Contributing Partner: UNT Libraries Government Documents Department
The aerodynamic characteristics of a slotted Clark y wing as affected by the auxiliary airfoil position

The aerodynamic characteristics of a slotted Clark y wing as affected by the auxiliary airfoil position

Date: January 1, 1932
Creator: Wenzinger, Carl J & Shortal, Joseph A
Description: Aerodynamic force tests on a slotted Clark Y wing were conducted in a vertical wind tunnel to determine the best position for a given auxiliary airfoil with respect to the main wing. A systematic series of 100 changes in location of the auxiliary airfoil were made to cover all the probable useful ranges of slot gap, slot width, and slot depth. The results of the investigation may be applied to the design of automatic or controlled slots on wings with geometric characteristics similar to the wing tested. The best positions of the auxiliary airfoil were covered by the range of the tests, and the position for desired aerodynamic characteristics may easily be obtained from charts prepared especially for the purpose.
Contributing Partner: UNT Libraries Government Documents Department
Aerodynamic characteristics of a wing with Fowler flaps including flap loads, downwash, and calculated effect on take-off

Aerodynamic characteristics of a wing with Fowler flaps including flap loads, downwash, and calculated effect on take-off

Date: January 1, 1936
Creator: Platt, Robert C
Description: This report presents the results of wind tunnel tests of a wing in combination with each of three sizes of Fowler flap. The purpose of the investigation was to determine the aerodynamic characteristics as affected by flap chord and position, the air loads on the flaps, and the effect of flaps on the downwash.
Contributing Partner: UNT Libraries Government Documents Department
The aerodynamic characteristics of airfoils as affected by surface roughness

The aerodynamic characteristics of airfoils as affected by surface roughness

Date: April 1, 1933
Creator: HOCKER RAY W
Description: The effect on airfoil characteristics of surface roughness of varying degrees and types at different locations on an airfoil was investigated at high values of the Reynolds number in a variable density wind tunnel. Tests were made on a number of National Advisory Committee for Aeronautics (NACA) 0012 airfoil models on which the nature of the surface was varied from a rough to a very smooth finish. The effect on the airfoil characteristics of varying the location of a rough area in the region of the leading edge was also investigated. Airfoils with surfaces simulating lap joints were also tested. Measurable adverse effects were found to be caused by small irregularities in airfoil surfaces which might ordinarily be overlooked. The flow is sensitive to small irregularities of approximately 0.0002c in depth near the leading edge. The tests made on the surfaces simulating lap joints indicated that such surfaces cause small adverse effects. Additional data from earlier tests of another symmetrical airfoil are also included to indicate the variation of the maximum lift coefficient with the Reynolds number for an airfoil with a polished surface and with a very rough one.
Contributing Partner: UNT Libraries Government Documents Department
The aerodynamic characteristics of airfoils at negative angles of attack

The aerodynamic characteristics of airfoils at negative angles of attack

Date: March 1, 1932
Creator: Anderson, Raymond F
Description: A number of airfoils, including 14 commonly used airfoils and 10 NACA airfoils, were tested through the negative angle-of-attack range in the NACA variable-density wind tunnel at a Reynolds Number of approximately 3,000,000. The tests were made to supply data to serve as a basis for the structural design of airplanes in the inverted flight condition. In order to make the results immediately available for this purpose they are presented herein in preliminary form, together with results of previous tests of the airfoils at positive angles of attack. An analysis of the results made to find the variation of the ratio of the maximum negative lift coefficient to the maximum positive lift coefficient led to the following conclusions: 1) For airfoils of a given thickness, the ratio -C(sub L max) / +C(sub L max) tends to decrease as the mean camber is increased. 2) For airfoils of a given mean camber, the ratio -C(sub L max) / +C(sub L max) tends to increase as the thickness increases.
Contributing Partner: UNT Libraries Government Documents Department
Aerodynamic characteristics of airfoils VI : continuation of reports nos. 93, 124, 182, 244, and 286

Aerodynamic characteristics of airfoils VI : continuation of reports nos. 93, 124, 182, 244, and 286

Date: January 1, 1930
Creator: unknown
Description: This collection of data on airfoils has been made from the published reports of a number of the leading aerodynamic laboratories of this country and Europe. The information which was originally expressed according to the different customs of the several laboratories is here presented in a uniform series of charts and tables suitable for use of designing engineers and for purposes of general reference. The authority for the results here presented is given as the name of the laboratory at which the experiments were conducted, with the size of the model, wind velocity, and year of test.
Contributing Partner: UNT Libraries Government Documents Department
Aerodynamic characteristics of anemometer cups

Aerodynamic characteristics of anemometer cups

Date: February 1, 1934
Creator: Brevoort, M J & Joyner, U T
Description: The static lift and drag forces on three hemispherical and two conical cups were measured over a range of angles of attack from 0 degrees to 180 degrees and a range of Reynolds Numbers from very small up to 400,000. The problems of supporting the cup for measurement and the effect of turbulence were also studied. The results were compared with those of other investigators.
Contributing Partner: UNT Libraries Government Documents Department
Aerodynamic characteristics of circular-arc airfoils at high speeds

Aerodynamic characteristics of circular-arc airfoils at high speeds

Date: January 1, 1932
Creator: Briggs, L J & Dryden, H L
Description: The aerodynamic characteristics of eight circular-arc airfoils at speeds of 0.5, 0.8, 0.95, and 1.08 times the speed of sound have been determined in an open-jet air stream 2 inches in diameter, using models of 1-inch chord. The lower surface of each airfoil was plane; the upper surface was cylindrical. As compared with the measurements described in NACA-TR-319, the circular-arc airfoils at speeds of 0.95 and 1.08 times the speed of sound are more efficient than airfoils of the R. A. F. or Clark Y families. At a speed of 0.5 times the speed of sound, the thick circular-arc sections are extremely inefficient, but thin sections compare favorably with those of the R. A. F. family. A moderate round of the sharp edges changes the characteristics very little and is in many instances beneficial. The results indicate that the section of the blades of propellers intended for use at high tip-speeds should be of the circular-arc form for the outer part of the blade and should be changed gradually to the R. A. F. or Clark Y form as the hub is approached.
Contributing Partner: UNT Libraries Government Documents Department