Search Results

open access

Accidental Radiation Excursion at the Y-12 Plant, June 16, 1958: Final Report

Description: This report describes the circumstances leading to the accident, attempts to reconstruct the nuclear reactivity conditions, and reviews the dosimetric means and results which were used to help determine the exposure of affected employees.
Date: September 12, 1958
Creator: Patton, F. S.; Bailey, J. C.; Callihan, A. D.; Googin, J. M.; Jasny, G. R.; McAlduff, H. J. et al.
open access

Analysis for Oxide in Thorium Metal

Description: Abstract. to estimate the oxygen picked up by thorium in casting a rapid method of running the acid insoluble content was developed. the quickest procedure consists of reacting with mixed acids, fuming with perchloric and filtration to separate the "free" thorium from the "combined". The precipitate is ignited and weighed as thorium dioxide.
Date: May 12, 1945
Creator: Ayers, A. S.
open access

Analysis of submarginal ore, Fawn Springs area, Bull Canyon District, San Miguel and Montrose Counties, Colorado

Description: During a compilation of ore reserves at Bull Canyon, it was apparent from the grade of submarginal mineralization that this material might be a low-grade reserve of importance. Mr. Lewis Hazen requested a memorandum of the results of the analysis; this memorandum is a response to that request.
Date: June 12, 1953
Creator: Garbrecht, Louis
open access

Artillery Peak Orientation Study, Mohave County, Arizona

Description: Report describing the results of an orientation study to determine uranium concentrations within the Artillery Peak and Prescott quadrangles in Arizona. It includes concentrations of uranium and 25 other elements based on analysis of wet, dry, and rock samples taken in the area.
Date: March 12, 1979
Creator: Puchlik, K. P.; Leach, D. L. & Cazes, D.
open access

Atom Arrangements in Some Iron-Aluminum Solutions, Report No. 1

Description: "Short-range order coefficients were measured at 300 and 400°C for iron-aluminum alloys containing 14.8, 18.2, and 20.0 atomic per cent aluminum. These alloys exhibited a strong preference for unlike near neighbors. The short-range order was greater at the lower temperature and increased as the Fe 3Al composition was approached."
Date: July 12, 1962
Creator: Houska, C. R. & Averbach, B. L.
open access

Boiling Reactors: A Preliminary Investigation

Description: Technical report detailing kinetic equations that have been developed for a boiling-type reactor and inherent reactor stability studies that have been made on the basis of these equations. Presents features of the proposed reactor, comparisons of circulating types, investigations of bubble-rise velocities, effects of transient conditions of vapor mass in steam chest, and bubble time delay functions yield favorable results. [From Abstract]
Date: December 12, 1951
Creator: Stein, J. M. & Kasten, P. R.
open access

Booby Traps

Description: The following report provides data taken of problematic situations that have led to accidental prompt-critical radiation bursts in critical assemblies laboratories, as well as a few risky instances. The purpose of this report is to prevent these mistakes from happening in the future.
Date: June 12, 1957
Creator: Paxton, Hugh Campbell
open access

Comparison of Radiation-Induced Graft Copolymerization Untilizing Electron Accelerators and Isotope Sources as Radiation Initiators

Description: "A comparison of grafting to two thicknesses of polypropylene film is made using isotope and electron accelerator initiation. The results indicate that the grafting of methacrylic acid: styrene to polypropylene is mainly a surface reaction."
Date: September 12, 1961
Creator: Odian, George; Oliver, William F. & Pierre, Karl
open access

The Corrosion of Various Stainless Steels in Synthetic Waste Solutions

Description: Technical report describing the tests on types 309, 316, and 347 stainless steel. These steels were tested for a total of 779 to 828 hours in three different synthetic waste solutions. Results shoe that the best all-around corrosion resistance to the test conditions was exhibited by 316 stainless steel, but in one solution 347 stainless steel was more resistant. [From Abstract]
Date: February 12, 1951
Creator: English, James L.
open access

Design and Test of a Diaphragm Pump for Liquid Metals

Description: Technical report. From Abstract : "Details are provided on the construction and operation of a two-stage diaphragm pump successfully used for the first time in liquid metal service. From the results of 5,376 hr. test of the pump it was concluded that it is well suited to the pumping of liquid metals at low flow rates where pulsating flow can be tolerated and also where remote operation is required. Operating temperatures and pressures are limited only by the availability of suitable materials o… more
Date: April 12, 1963
Creator: Westerheide, D. E. & Clifford, J. C.
open access

The Design of a Dynamic Corrosion and Chemical Control Test Loop and Preliminary Out-of-Pile Test Results

Description: From abstract: "This report describes the overall loop design and the means by which this design was developed. These include critical facility measurements, analog computer calculations, hydraulic and heat transfer computations, and the construction and operation of an out-of-pile mock-up loop to determine the dynamic characteristics of the loop."
Date: July 12, 1963
Creator: Zelezny, W. F.
open access

The Design Study of Fluid Engine Power Systems

Description: From abstract: This report presents information generated during a six month feasibility study of an engine which uses a supercritical working fluid as the secondary portion of nuclear powered electric generating system.
Date: April 12, 1963
Creator: Baker, C. H.; Hunter, T. A.; Pauliukonis, R. S. & Pradhan, A. V.
open access

The Determination of Indium in Indium Plutonium Solutions

Description: Abstract: "A gravimetric procedure is described for the analysis of indium-plutonium solutions. This procedure consists of a preliminary separation of the plutonium as the peroxide, followed by the quantitative precipitation of indium diethyl dithio carbamate from a slightly acid solution. The precipitate is dried at 105 C and weighed. Recoveries of 99.4 - 100.5% with an average precision of 2.3/100 were obtained on known Pu-In solutions containing 5 - 50 mg of indium per sample."
Date: December 12, 1950
Creator: Waterbury, Glenn R.
open access

Drawings of an Electrolysis Assembly

Description: The document consists of two photographs and ten drawing of an electrolysis assembly for electroplating radioactive samples and one drawing of a thin-window Beta-counter. Included are a cell support, an electrolysis cell, electrolysis cell cathode, cell rack, Geiger counter absorber slide, carrier for electrolysis cell cathodes, and a cover for electrolysis cell cathode carrier.
Date: January 12, 1947
Creator: Loevinger, Robert
open access

Effect of Temperature on Uranium Recovery Columns Operation

Description: Some data on the temperature effect in pulse columns are reviewed. New data obtained with the "vibrational" stirrer are reported. The effects on both the dispersion and coalescence and the net rate of extraction suggest that improved operation of the RA column and lowered waste losses would be expected at elevated temperatures.
Date: August 12, 1953
Creator: Burger, L. L.
Back to Top of Screen