UNT Libraries Government Documents Department - 457 Matching Results

Search Results

Results: 1 - 24 next
open access

Adaptor for Measuring Principal Strains With Tuckerman Strain Gage

Description: Report discussing an adapter which uses three Tuckerman optical strain gages to measure the displacement of the three vortices of an equilateral triangle along lines 120 degrees apart. These displacements are substituted in well-known equations in order to compute the magnitude and direction of the principal strains. Tests of the adaptor indicate that principal strains over a gage length of 1.42 inch may be measured with a systematic error not exceeding 4 percent and a mean observational error … more
Date: June 1943
Creator: McPherson, A. E.
open access

Additional design charts relating to the stalling of tapered wings

Description: From Introduction: "The present report, therefore, may be considered a supplement to reference 1. The combined scope of the stall charts of reference 1, designated A, and of the present work, designated B, is summarized in the following table: For the wing with root thickness ratio to 18 was also investigated.
Date: January 1943
Creator: Harmon, Sidney M.
open access

Adsorbent Clays: Their Distribution, Properties, Production, and Uses

Description: From Abstract: "This bulletin is a summary of present knowledge of the adsorbent or bleaching clays-their distribution, field and laboratory identification, physical and chemical properties, uses, quality, and value. Problems in the drying, treating with acids, and washing are discussed, and methods of testing and rating decolorizing efficiency are described."
Date: 1943
Creator: Nutting, P. G.
open access

The Advantages of Uniform Fuel Distribution for Air-Cooled Engines From Considerations of Cooling Requirements and Fuel Economy

Description: "The purpose of this report is to show by analysis of existing data, pending direct experimental determination, the extent to which nonuniform distribution of fuel to cylinders of a multicylinder engine can produce temperature deviation and the benefits to be anticipated from attainment of uniform fuel distribution" (p. 1).
Date: December 1943
Creator: Rubert, K. F.; Corson, Blake W., Jr. & Nielsen, Jack
open access

Aerodynamic and Hydrodynamic Tests of a Family of Models of Flying-Boat Hulls Derived From a Streamline Body: NACA Model 84 Series

Description: Report presenting a series of related flying-boat hull forms with various combinations of aerodynamic and hydrodynamic requirements that were tested in an NACA tank and high-speed tunnel. Effects explored included varying the height of the bow, varying the height of the stern, increasing the angle of dead rise at the bow, decreasing the angle of dead rise on the afterbody, increasing the depth of step, increasing the angle of afterbody keel, adding chine flare, adding a third planing surface, a… more
Date: September 1943
Creator: Parkinson, John B.; Olson, Roland E.; Draley, Eugene C. & Luoma, Arvo A.
open access

Aerodynamic and hydrodynamic tests of a family of models of flying hulls derived from a streamline body -- NACA model 84 series

Description: Report discussing a series of related forms of flying-boat hulls representing various degrees of compromise between aerodynamic and hydrodynamic requirements was tested in Langley Tank No. 1 and in the Langley 8-foot high-speed tunnel. The purpose of the investigation was to provide information regarding the penalties in water performance resulting from further aerodynamic refinement and, as a corollary, to provide information regarding the penalties in range or payload resulting from the reten… more
Date: 1943
Creator: Parkinson, John B.; Olson, Roland E.; Draley, Eugene C. & Luoma, Arvo A.
open access

Altitude Rating of Electrical Apparatus

Description: "This paper studies the effect of altitude on the ratings of rotating electric machines and after determining the fundamental principles involved, discusses these in relation to the application of such machines in modern aircraft" (p. 1).
Date: January 1943
Creator: Lebenbaum, Paul, Jr.
open access

Analysis of Wind-Tunnel Stability and Control Tests in Terms of Flying Qualities in Full-Scale Airplanes

Description: From Summary: "The analysis of results of wind-tunnel stability and control tests of powered airplane models in terms of the flying qualities of full-scale airplanes is advocated. In order to indicate the topics upon which comments are considered desirable in the report of a wind-tunnel stability and control investigation and to demonstrate the nature of the suggested analysis, the present NACA flying-qualities requirements are discussed in relation to wind-tunnel tests. General procedures for … more
Date: October 1943
Creator: Kayten, Gerald G.
open access

Analysis of wind-tunnel stability and control tests in terms of flying qualities of full-scale airplanes

Description: From Introduction: "The purpose of this paper is to outline a suggested form of presentation of the results of a stability and control investigation in terms of flying qualities as defined in reference 1 and to systematize and review briefly the analytical work required for this type of presentation. No effort is made to specify definite test procedures."
Date: April 1, 1943
Creator: Kayten, Gerald G.
open access

Annual Report of Research and Technologic Work on Coal: Fiscal Year 1942

Description: Report issued by the U.S. Bureau of Mines discussing studies over the research and technology of coal during 1942. As stated in the introduction, "the annual reports of the research and technologic investigations conducted by the Bureau of Mines on the occurrence, properties, mining, preparation, and uses of coal, of which the present report is the seventh, are intended to be brief summaries of progress" (p. 4). This report includes tables, illustrations, and photographs.
Date: May 1943
Creator: Fieldner, Arno Carl & Rice, W. E.
open access

Antiknock Effectiveness of Xylidines in Small-Scale Engines

Description: "The data presented in this report are part of a general program to determine the effects of xylidines on the knock-limited performance of currently used aviation fuels" (p. 2).
Date: August 1943
Creator: Branstetter, J. Robert & Meyer, Carl L.
open access

Bearing strengths of bare and alclad XA75S-T and 24S-T81 aluminum alloy sheet

Description: From Introduction: "A report was recently issued covering an investigation of the bearing properties of the wrought aluminum alloys commonly used in aircraft construction (reference 1). Since this work was undertaken, two new materials, XA75S-T and 24S-T81, have been developed to the commercial stage for aircraft use. The objection of this investigation was to determine the bearing yield and ultimate strengths of these new materials in the form of bare and alclad sheet."
Date: December 1943
Creator: Moore, R. L. & Wescoat, C.
open access

Bearing strengths of some wrought-aluminum alloys

Description: From Introduction: "Although a number of investigations of the bearing strength of aluminum alloys have been made, the problem remains one of considerable interest to the aircraft industry. For this reason it has seemed advisable to make additional tests of the commonly used aircraft alloys in an effort to establish a better basis for the selection of allowable bearing values. Current design practice does not recognize the effect of edge distance upon bearing strengths, and for this reason edge… more
Date: August 1943
Creator: Moore, R. L. & Wescoat, C.
open access

Bearing tests of magnesium-alloy sheet

Description: From Summary: "Bearing tests of AM-3S, AM-52S, and AM-C57S magnesium-alloy sheet in various thicknesses and tempers were made. Bearing yield and ultimate strengths were determined and compared for various edge distances and for various ratios of loading-pin diameter to sheet thickness. Tensile strengths were determined and ratios of average bearing yield and ultimate strength to tensile strength are given."
Date: June 1943
Creator: Sharp, W. H. & Moore, R. L.
open access

The belt method for measuring pressure distribution

Description: "The measurement of pressure distribution may be accomplished rapidly for any number of locations deemed necessary in model or full-scale investigations by use of the 'belt' method. Reasonable accuracy may be obtained by careful use of this method" (p. 1).
Date: February 1943
Creator: Corson, Blake W., Jr.
open access

Briquetting Subbituminous Coal

Description: Report issued by the Bureau of Mines over briquetting of coal for development of more effective fuel. Materials, equipment, and processes are discussed. This report includes tables, illustrations, and photographs.
Date: June 1943
Creator: Parry, V. F. & Goodman, John B.
open access

Brown Oxide by-Product Recovery. Part I

Description: The objective of this report is to investigate the feasibility of obtaining uranium from the carnotite sludge in such a form as o permit its use in the brown oxide purification process.
Date: July 1, 1943
Creator: Copenhafer, D. & Oppold, W. A.
Back to Top of Screen