UNT Libraries Government Documents Department - 13,786 Matching Results

Search Results

open access

Intercooler cooling-air weight flow and pressure drop for minimum drag loss

Description: Report presenting an analysis of the power losses in airplane flight of cross-flow plate and tubular intercoolers to determine the cooling-air weight flow and pressure drop that give minimum total power loss for any given cooling effectiveness. The investigation covers a range of flight conditions of altitude, airspeed, lift-drag ratio, supercharger-pressure ratio, and adiabatic efficiency.
Date: April 1944
Creator: Reuter, J. George & Valerino, Michael F.
open access

Albert TE-1 Training Airplane

Description: The TE-1 is designed for the economical training of pilots and is a single seat parasol cantilever monoplane. It is nearly entirely made of wood, using a 40 HP. air-cooled Salmson A.D. 9 engine, and weighs 255 kg empty.
Date: December 1926
open access

Investigations toward simplification of missile control systems

Description: Paper presenting three ideas regarding potential simplifications of missile-control systems in order to make them more reliable without sacrificing system performance. The three methods presented include an autorotating-vane spoiler, a bellows flap, and free controls. All are based on modified airplane control systems.
Date: November 12, 1953
Creator: Curfman, Howard J., Jr.; Strass, H. Kurt & Crane, Harold L.
open access

Correlation of exhaust-valve temperatures with engine operating conditions and valve design

Description: Report presenting a theory regarding engine-cooling variables from a previous report, which was used as a basis for the development of a semi-empirical equation to correlate exhaust-valve temperature with engine conditions. Results regarding the determination of constants, influences of operating variables on mean effective gas temperatures, thermal-resistance factor, and accuracy of correlating equation are provided.
Date: October 1945
Creator: Zipkin, M. A. & Sanders, J. C.
open access

Experiments on Drag of Revolving Disks, Cylinders and Streamline Rods at High Speeds

Description: Report presenting an experimental investigation concerned primarily with the extension of test data on the drag of revolving disks, cylinders, and streamline rods to high Mach numbers and Reynolds numbers. The tests generally confirm earlier theories and add in some new results. One of the primary findings of interest is that skin friction does not depend on Mach number.
Date: June 1944
Creator: Theodorsen, Theodore & Regier, Arthur
open access

The effect of compressibility on two-dimensional tunnel-wall interference for a symmetrical airfoil

Description: Summary: The effective change in the velocity of flow past a wing section, caused by the presence of wind-tunnel walls, is known for potential flow. This theory is extended by investigation of the two-dimensional compressible flow past a thin Rankine Oval. It is shown that for a symmetrical section at zero angle of attack the velocity increment due to the tunnel walls in the incompressible case must be multiplied by the factor 1/1-M^2 to take account of compressibility effects. The Mach numb… more
Date: May 1943
Creator: Nitzberg, Gerald E.
open access

Lioré-Olivier LeO 194 Seaplane

Description: Report presenting a description of the Lioré-Olivier LeO 194 seaplane and a particular series of flights made over several months. Its fuselage is made entirely of wood. It has 6 gasoline tanks each with a capacity of 255 liters. It is a single engine biplane with wings mounted above the body of the seaplane.
Date: April 1927
open access

A method for determining the rate of heat transfer from a wing or streamline body

Description: From Summary: "A method for calculating the rate of heat transfer from the surface of an airfoil or streamline body is presented. A comparison with the results of an experimental investigation indicates that the accuracy of the method is good. This method may be used to calculate the heat supply necessary for heat de-icing or in ascertaining the heat loss from the fuselage of an aircraft operating at great altitude, for example."
Date: December 1942
Creator: Frick, Charles W., Jr. & McCullough, George B.
open access

Emergency Measures for Increasing the Range of Fighter Airplanes

Description: "An analysis was made to show the relative effectiveness of streamline external fuel tanks, a fuel tank in the form of a wing mounted in a biplane position, and auxiliary wing panels attached at the wing tips to increase the span as temporary means for increasing the range of a fighter-type airplane. Figures and charts for the various devices considered show the results of calculations of range, duration of flight, and take-off distance for both land-base and carrier operation. The results indi… more
Date: May 1943
Creator: Jones, Robert T. & Wetmore, Joseph W.
open access

Review of Flight Tests of NACA C and D Cowlings on the XP-42 Airplane

Description: Report presenting the results of flight tests of the performance and cooling characteristics of three NACA D cowlings and of a conventional NACA C cowling on the XP-42 airplane. The D cowling is, generally, characterized by the use of an annular inlet and diffuser section for the engine-cooling air. An increase in maximum speed was noted in the XP-42 airplane due to the change from a C cowling to a D cowling.
Date: April 1943
Creator: Johnston, J. Ford
open access

Fuel-Evaporation Loss as Determined by the Change in the Specific Gravity of the Fuel in an Aircraft Fuel Tank

Description: Report discusses the results of an investigation to determine the feasibility of using the change in the specific gravity of fuels in aircraft fuel tanks to measure fuel-vaporization loss. Six fuels were tested via fuel-distillation tests and simulated-flight tests. An equation based on the specific gravity of the fuel is also described.
Date: May 1945
Creator: Stone, Charles S. & Kramer, Walter E.
open access

Fluid de-icing tests on a Chandler-Evans 1900 CPB-3 carburetor mounted on a Pratt & Whitney R-1830-C4 intermediate rear engine section

Description: Report presenting an investigation of the icing and de-icing characteristics of a Pratt & Whitney R-1830 engine induction system. The current report covers a program to determine the most effective rate and method of injection of de-icing fluid to remove a heavy ice formation from the induction system. Results regarding the flow rates, recovery times, de-icing portions of the runs, and ice formation characteristics are provided.
Date: October 1944
Creator: Galvin, Herman B. & Essex, Henry A.
Back to Top of Screen