Search Results

open access

A Preliminary Survey of Radioactive Constituents in Rainwater at ORNL

Description: Technical report surveying radio-chemical analyses by ORNL's Analytical Chemistry Division and Health-Physics Division of large volumes of rainwater for plutonium, uranium, and fission products. Overall, carrying efficiencies for Al(OH)3 scavenging of rainwater were determined for these elements, as well as for Pu and U. [From Abstract, Introduction]
Date: December 4, 1950
Creator: Booksbank, W. A., Jr.; Emmons, A. H.; Gost, J. W. & Reynolds, S. A.
open access

Investigation of Materials for a Water Cooled and Moderated Reactor [Declassified Version]

Description: An investigation of the materials for use in the water-moderated and cooled Aray Package Power Reactor (APPR) operating at about 500°F was made. The available literature was analyzed, and the results of the different investigators were compared and averaged. Twenty different materials, including stainless steels, nickel alloys, Stellites and others, were investigated from the point of view of physical properties, susceptibility to radiation damage, and corrosion resistance. Corrosion rates were… more
Date: August 1954
Creator: Scheib, Louis
open access

Statistical Evaluation of Methods for the Analysis of Dibasic Aluminum Nitrate (DIBAN)

Description: The indicated methods for determining the following constituents of Diban, which is an aqueous solution of dibasic aluminum nitrate, Al(OH)2NO3, were evaluated statistically: 1aluminum by gravimetric, volumetric, and spectrophotometric procedures, 2. basicity (hydroxyl value) by formation of an aluminum complex and titration of the free acid with standard alkali solution, 3. total nitrogen by the Kjeldahl method, 4. ammonia by the Kjeldahl method, and 5. nitrates by means of a cation-exchange r… more
Date: September 16, 1955
Creator: Surak, J. G.; Thomason, P. F. & Haaen, H. P.
open access

The Effects of Reactor Irradiation of Thorium-Uranium Alloy Fuel Plates

Description: Several plates of 98.7% Th - 1.2% U 235 (clad in aluminum) were irradiated in the MTR for an integrated flux of 2.6 x 10 21 neutrons/cm2. Although these samples represent an early development in bonding of aluminum to thorium and there are better methods at present, the bond proved to be quite strong and both clad and core were dimensionally stable under irradiation. The production of uranium 233 was as much as theory would indicate and the total amount of fissionable material material after ir… more
Date: September 7, 1955
Creator: Carrell, R. M.
open access

Solid State Division Semiannual Progress Report for Period Ending August 31, 1955

Description: LITR Fluoride-Fuel Loop. — The inconel loop was dismantled for removal of the samples and for recovery of the uranium by using the remote cutting tools installed in a half cell of the Solid State Building. Disassembly proceeded without incident. An electric-arc cutting technique was developed for removal of the stainless steel enclosure around the pump bowl. Fission power and maximum flux were determined by irradiating a simulated loop, by heat-balance calculations, by radiochemical analyses fo… more
Date: November 16, 1955
Creator: Billington, D. S. & Crawford, J. H., Jr.
open access

Determination of Corrosion Products and Additives in Homogeneous Reactor Fuel III. Polarographic Determination of Iron(III)

Description: An ion-exchange -- polarographic method was developed for the determination of iron(III) in Homogeneous Reactor Fuels. Copper, which interferes, is removed from the fuel by plating it onto a cadmium coil. Iron is oxidized to iron(III) by potassium permanganate, and the iron(III) is separated from interfering metal ions by ion exchange on a Dowex 1 resin column that is in the sulfate form. The iron(III) in the effluent is determined polarographically in 0.5 M sodium citrate solution as supportin… more
Date: October 24, 1955
Creator: Horton, A. D.; Thomason, P. F. & Raaen, H. P.
open access

Enthalpies and Heat Capacities of Solid and Molten Fluoride Mixtures

Description: The enthalpies and heat capacities of seventeen fluoride mixtures in the liquid state have been determined using Bunsen Ice Calorimeters and copper block calorimeters. The fluoride mixtures were composed of the fluorides of two or more of the following metals: lithium, sodium, potassium, beryllium, zirconium, and uranium. The enthalpies and heat capacities of most of these mixtures were studied in the solid state also. Estimates of the heat of fusion have been made. General empirical equations … more
Date: January 11, 1956
Creator: Powers, W. D. & Blalock, G. C.
open access

The Influence of End Mirrors, High Density and Long Tube Length on Radial Diffusion

Description: Diffusion in an arc plasma across a magnetic field is investigated. The geometry is similar to that reported in ORNL-1890 but with the addition of magnetic mirrors on the ends of the arc chamber. It is shown that mirrors do not eliminate the "short circuit" effect. Comparison of the e-folding length, rₒ, of the radial ion density with and without mirrors, affords a direct measurement of ℓ/λ where ℓ is the arc length and λ the mean-free-path. In addition rₒ is independent of gas pressure with mi… more
Date: September 22, 1955
Creator: Simon, Albert
open access

Analytical Chemistry Division Semiannual Progress Report For Period Ending October 20, 1955

Description: The development of ionic methods for the determination of corrosive products in the highly radioactive Homogeneous Reactor (HR) fuels has been of major interest in the work of the Ionic Analyses Laboratory. Methods for the spectrophotometric determination of aluminum and for the polarographic determination of iron in HR fuels have been developed. The polarographic determination of molybdenum in uranyl sulfate solutions was studied. A polarographic method for the determination of zinc was develo… more
Date: December 27, 1955
Creator: Kelley, M. T.; Susana, C. D. & Rooen, H. P.
open access

Relative Biological Hazards of Radiations Expected in Homogeneous Reactors TBR and HPR

Description: An evaluation of the relative health hazards of radioisotopes produced in nuclear reactors is reported. The most important hazards were indicated to be I131, the Sr90 - Y90 chain, the Ce144 -Pr144 chain, Sr 89, the Ba140-La40 chain, Y91, the Zr95-Nb95 chain, Pr143, La140 , and Pa233. The most critical body organs affected by air-borne contamination are the thyroid gland, the bone marrow, the lungs, and the gastrointestinal tract. Where possible, continuous daily removal of gaseous and solid fis… more
Date: December 2, 1955
Creator: Arnold, E. D. & Gresky, A. T.
open access

Determination of Trivalent Uranium with Methylene Blue

Description: A direct titrimetric method for the determination of trivalent uranium in uranium trifluoride and mixtures of fused fluoride salts was developed. The method is based on the stoichiometric oxidation of trivalent uranium to the tetravalent oxidation state with an acidic solution of methylene blue. The sample containing trivalent uranium is dissolved at room temperature in an excess of standard methylene blue solution in a carbon dioxide atmosphere; the excess oxidant is variation of the method is… more
Date: November 22, 1955
Creator: Ross, W. J.; Meyer, A. S.; White, J. C.; Kelley, N. T. & Susano, C. D.
open access

Laboratory Development of the Thorex Process

Description: Changes made in the Thorex process flowsheet were a decrease in the extraction column acidity to decrease thorium losses and the addition of a second thorium solvent-extraction cycle to provide the increased decontamination required when thorium irradiated to 2000-4000 g of U233 per ton is processed. Bonded slugs could not be dissolved by the Thorex flowsheet procedure. Various laboratory scale studies on feed preparation, first-cycle variables, and radiation damage to the solvent are reported.
Date: June 12, 1956
Creator: Wischow, R. P. & Mansfield, R. G.
open access

Chemical Separation of Isotopes Section Semiannual Progress Report for Period Ending June 30, 1955

Description: The countercurrent gas-liquid system BF3(g)—anisole·BF3(l) for the concentration of boron isotopes has been studied. The single-storage separation factor varies from 1.039 at 0°C to 1.029 at 30°C. Rate of exchange is rapid, and, with efficient contacting equipment, complete exchange may be obtained in less than 15 sec. A total separation of 1.525 has been realized in laboratory equipment. The critical-product reflux reaction is quite efficient. Only about 55 moles of BF3 remain in each million … more
Date: February 23, 1956
Creator: Clewett, G. H. & Drury, J. S.
open access

Aircraft Nuclear Propulsion Project Quarterly Progress Report for Period Ending December 10, 1955

Description: This quarterly progress report of the Aircraft Nuclear Propulsion Project at ORNL records the technical progress of the research on circulating-fuel reactors and other ANP research at the Laboratory under its Contract W-7405-eng-26. The report is divided into three major parts: I. Reactor Theory, Component Development, and Construction, II. Materials Research, and III. Shielding Research. The ANP Project is comprised of about 530 technical and scientific personnel engaged in many phases of rese… more
Date: March 12, 1956
Creator: Jordan, W. H.; Cremer, S. J.; Miller, A. J. & Savelainen, A. W.
open access

ORNL Mortal Recovery Plant: Processing of ORNL Graphite Reactor Fuel Elements During the Period July and August, 1955

Description: From July 7 to August 31, 1955, 20 tons of uranium and 1,200 g of plutonium were recovered in 47 days of plant operation at an average rate of 833 lb/day of uranium and at a cost of $2.60/lb of uranium. Uranium and plutonium recoveries were, respectively, 99.9 and 95.5 per cent.
Date: November 11, 1955
Creator: Brooksbank, R. E.; Chandler, J. M. & Hylton, C. D.
open access

Preliminary Results of APPR Critical Experiments, Part I.

Description: This memorandum is the first in a series reporting progress in the program of critical experiments in the ORNLArmy Package Power Reactor Project. The critical assembly, designated as CA-25, is analogous to the APPR design core and consists of 45 fuel boxes, in a 7 x 7 array with the corners removed, contaIned in a large water tank. Two sides of each box are slotted for the insertion and positioning of any desired loading of eighteen plates of fuel, structural material, and poison. The array is … more
Date: November 25, 1955
Creator: Williams, D. V. P.
open access

Development of a Cubic Oxide Protective Film on Zirconium

Description: Observations of the effects of neutron damage to zirconium oxides led to the conclusion that the cubic form of ZrO2 is more stable to such damage than the monoclinic form. It has been reported that zirconium corrodes more rapidly in certain liquids when exposure is made under radiation (neutrons and fission products). It is well known that on heating monoclinic ZrO2 a transformation, monoclinic to tetragonal (very similar to cubic), occurs at about 1500°C. The transformation involves sufficient… more
Date: February 21, 1956
Creator: Johnson, J. R.
open access

Bibliography of ORNL-BSF Reports Pertinent to Swimming Pool Type Reactor Design (Revised)

Description: Much of the shielding work carried out with the Bulk Shielding Reactor (BSR) has yielded data of particular interest for the design of swimming pool type reactors, However, it is often difficult for a reactor designer to locate such data since it may be recorded in a report primarily concerned with shielding problems. Therefore, this memorandum presents a bibliography of reports from the Bulk Shielding Facility arranged according to the application of data to the various aspects of reactor desi… more
Date: April 13, 1956
Creator: Maienschein, F. C. & Johnson, E. B.
open access

Fission Product Activities in Irradiated Natural Uranium, Enriched Uranium, and Thorium

Description: Calculated data and graphs describing the effects of batch thermal-neutron irradiations on the buildup of fission products in natural uranium, enriched uranium, and thorium are presented together with empirical equations and plots correlating total fission product activities and/or decontamination factors. Fluxes of 1012-1015 are considered.
Date: March 28, 1956
Creator: Arnold, E. D.
open access

HRP Radiation Corrosion Studies

Description: A fifth in-pile loop experiment, L-4-8, was completed. The loop operated in-pile for a total of 1637 hr, during which time the LITR energy output was 4377 Mwhr. The average fission power in the loop based o cesium analyses was 622 w when the LITR was at full power (3 Mw). Based on oxygen data, the generalized corrosion rate for the first 300 hr was 4.0 mpy; the rate for the remaining 1357 hr was 0.7 mpy. The nickel data gave parallel results. The corrosion of the type 347 stainless steel, Zirca… more
Date: August 21, 1956
Creator: Baker, J. E.; Bradley, N. C.; Jenks, G. H.; Olsen, A. R.; Savage, H. C. & Walter, F. J.
open access

Chemistry Division Semiannual Progress Report for Period Ending December 20, 1955

Description: Semiannual Progress report of the Oak Ridge National Laboratory Chemistry Division providing updates on various projects, experiments, and other work in inorganic and physical chemistry, nuclear chemistry, organic chemistry, chemical physics, chemistry of separation processes, radiation chemistry, and reactor chemistry.
Date: April 13, 1956
Creator: Taylor, E. H. & Bredig, M. A.
open access

Biology Division Semiannual Progress Report for Period Ending February 15, 1956

Description: Progress report of the Oak Ridge National Laboratory Biology Division providing updates on various projects, experiments, and other work. This report includes a summary of scholarly output from the division and departmental activities in cytology and genetics, mammalian genetics and development, microbial protection and recovery, mammalian recovery, pathology and physiology, general physiology, biochemistry, enzymology and photosynthesis, microbiology, plant biochemistry, and biophysics.
Date: April 20, 1956
Creator: Hollaender, Alexander & Carson, Stanley F.
open access

High-Thermal-Conductivity Fin Material for Radiators

Description: This report is the result of a study to develop heat-resistant fin materials possessing a high thermal conductivity for air radiators. Since an economical and commercially feasible product was desired, the investigation was restricted primarily to a study of electroplated copper, clad copper, and copper alloys. Sheet material 0.008 to 0.010 in. thick was evaluated for fabricability and for metallurgical stability and thermal conductivity at 1500°F. From the results of the rests it was concluded… more
Date: January 24, 1957
Creator: Inouye, H.
Back to Top of Screen