UNT Libraries Government Documents Department - 298 Matching Results

Search Results

open access

Corn culture.

Description: A general guide to growing corn crops in the United States, including selection, land preparation, planting, culture, and insect and disease control.
Date: 1940
Creator: Richey, Frederick D. (Frederick David), b. 1884
open access

High-speed drag tests of several fuselage shapes in combination with a wing

Description: Drag testing was conducted in the high-speed wind tunnel of 23 conditions combining six streamline shapes and three conventional cowling-fuselage bodies. All of the models were tested in combination with a wing in order to include wing-fuselage interference effects. The critical speeds of combinations tested were, in general, determined by the wing-fuselage juncture.
Date: August 1940
Creator: Draley, Eugene C.
open access

Wind Tunnel Tests of a Submerged-Engine Fuselage Design

Description: Report presenting tests conducted in the 8-foot high-speed wind tunnel of a scale model pursuit-type fuselage with practicable internal duct arrangement designed to meet all of the air requirements of a 1000-horsepower radial engine submerged at the maximum section. The results showed that the required internal flow can be obtained with negligible ducting losses provided that basic principles are observed in designing the air passages.
Date: October 1940
Creator: Becker, John V. & Baals, Donald D.

Minimum standards for employment of women in industry.

Description: Checkerboard chart of alternating white and shaded boxes. Each box contains text indicating various standards which should be met in workplaces for women, some with line drawings. In the middle of the poster is the seal of the U.S. Dept. of Labor, Women's Bureau. Centered on the lower half of the chart is an orange box containing text describing the mission of the Women's Bureau.
Date: 1940
Creator: United States. Women's Bureau.
open access

Experiment Station Record, Volume 81, July-December, 1939

Description: Volume provides abstracts of agricultural experiments conducted during the year. Also includes statistics, convention reports, bulletins, bibliographies, and listings for Spanish edition publications from the Puerto Rico Station. Name and subject indexes start on page 893.
Date: 1940
Creator: U.S. Department of Agriculture. Office of Experiment Stations.
open access

Mineral Industries Survey of the United States, California: Tuolumne and Mariposa Counties, Mother Lode District (South). Mines of the Southern Mother Lode Region, Part 2 -- Tuolumne and Mariposa Counties

Description: Report issued by the Bureau of Mines over mining operations in the southern Mother Lode Region of California. A review of this area is presented, and discussed. This report includes tables, illustrations, and photographs.
Date: 1940
Creator: Julihn, C. E. & Horton, F. W.
open access

The Design of Cooling Ducts With Special Reference to the Boundary Layer at the Inlet

Description: "A study has been made of underslung cooling ducts with special references to the problems presented by the boundary layer on the fuselage skin. It was found that good flow can be obtained in such ducts by (1) making the inlet opening of such size that the mean inlet velocity is about 0.6 the free-stream velocity and (2) providing vanes behind as well as ahead of the radiator. Tables to facilitate design are included, together with an example " (p. 1).
Date: December 1940
Creator: Katzoff, S.
open access

Drag and propulsive characteristics of air-cooled engine-nacelle installations for two-engine airplanes

Description: Report presenting a study on wing-nacelle propeller arrangements using a two-engine airplane with nacelles varying in diameter. Results regarding the power-off characteristics, propulsive and overall efficiencies, power-on characteristics, and pressure distributions are provided.
Date: December 1940
Creator: Wilson, Herbert A., Jr. & Lehr, Robert R.
open access

Requirements for Unit Fuel-Injection Systems

Description: "A unit injector was operated under various test conditions with a cam outline giving a high rate of plunger displacement. The rate of discharge of the unit injector followed the plunger displacement for the outwardly opening injection valve (open nozzle) except under conditions of high fuel pressures when the effect of fuel compressibility decreased the rate of discharge as the pressure increased. The rate of discharge for the inwardly opening injection valve (closed nozzle) did not directly f… more
Date: July 1940
Creator: Marsh, Edred T.
open access

Stress Distribution in and Equivalent Width of Flanges of Wide, Thin-Wall Steel Beams

Description: "The use of different forms of wide-flange, thin-wall steel beams is becoming increasingly widespread. Part of the information necessary for a national design of such members is the knowledge of the stress distribution in and the equivalent width of the flanges of such beams. This problem is analyzed in this paper on the basis of the theory of plane stress. As a result, tables and curves are given from which the equivalent width of any given beam can be read directly for use in practical design… more
Date: November 1940
Creator: Winter, George
open access

An Investigation of Sheet-Stiffener Panels Subjected to Compression Loads With Particular Reference to Torsionally Weak Stiffeners

Description: "A total of 183 panel specimens of 24ST aluminum alloy with nominal thickness of 0.020, and 0.040 inch with extruded bulb-angle sections of 12 shapes spaced 4 and 5 inches as stiffeners were tested to obtain the buckling stress and the amplitude of the maximum wave when buckled. Bulb angles from 3 to 27 1/2 inches long were tested as pin-end columns. The experimental data are presented as stress-strain and column curves and in tabular form" (p. 1).
Date: February 1940
Creator: Dunn, Louis G.
open access

Measured Moments of Inertia of 32 Airplanes

Description: "A compilation of the experimentally determined moments of inertia of 32 airplanes is presented. The measurements were obtained at the laboratories of the NACA by means of a pendulum method. The airplanes tested are representative of several types of aircraft of gross weight less than 10,000 pounds. The results are presented in coefficient as well as in dimensional form. An elementary analysis of the data disclosed the possibility of grouping the results according to wing type of the airplane, … more
Date: October 1940
Creator: Gracey, William
open access

Measurement of the Forces Acting on Gliders in Towed Flight

Description: "The magnitude, the direction, and the fluctuations of tow forces exerted upon gliders by towing them aloft behind an automobile were measured under a variety of conditions covering a range from gentle to severe types of operation. For these tests, the glider towing force did not exceed 1.6 of the gross weight of the glider. V-G records obtained during the towed-flight period as well as during the subsequent return glide to earth showed accelerations in the range from 3 to -1 g. The results of … more
Date: February 1940
Creator: Klemperer, W. B.
open access

An Investigation of the Prevention of Ice on the Airplane Windshield

Description: "An investigation of three methods for the prevention and the removal of ice on an airplane windshield has been completed. The methods were: electric heating; hot-air heating; and an alcohol-dispensing, rotating wiper blade. The results showed that vision through the airplane windshield could be maintained during severe icing conditions by the use of heat" (p. 1).
Date: March 1940
Creator: Rodert, Lewis A.
open access

Propeller Rotation Noise Due to Torque and Thrust

Description: "Sound pressure of the first four harmonics of rotation from a full-scale two-blade propeller were measured and are compared with values calculated from theory. The comparison is made (1) for the space distribution with constant tip speed and (2) for fixed space angles with variable tip speed. A relation for rotation noise from an element of radius developed by Gutin is given showing the effect of number of blades on the rotation noise" (p. 1).
Date: January 1940
Creator: Deming, Arthur F.
open access

Notes on the stalling of vertical tail surfaces and on fin design

Description: From Summary: "A discussion is given of the important aspects of the stalling of vertical tail surfaces. The type of instability encountered is described and the possibilities of inadvertent occurrence are noted. The influence of directional flight tests on the behavior of a airplane when the tail stall takes place is discussed. In this connection, flight tests of a twin-engine airplane in which the vertical fin area was increased are cited."
Date: October 1940
Creator: Thompson, F. L. & Gilruth, R. R.
open access

A new method of studying the flow of the water along the bottom of a model of a flying-boat hull

Description: A new method of studying the flow of the water along the bottom of a model of a flying-boat hull is described. In this method, the model is fitted with a transparent bottom and is divided down the center line by a bulkhead. The flow is observed and photographed through one-half of the model by means of the diffused illumination from a battery of lamps contained in the other half of the model. Photographs of the flow, particularly of the changes that occur when the step ventilates, are shown. Th… more
Date: February 1940
Creator: Ward, Kenneth E.
open access

A Generalized Vortex Theory of the Screw Propeller and Its Application

Description: "The vortex theory as presented by the author in earlier papers has been extended to permit the solution of the following problems: (1) the investigation of the relation between thrusts and torque distribution and energy loss as given by the induction of helical vortex sheets and by the parasite drag; (2) the checking of the theorem of Betz of the rigidly behaving helical vortex sheet of minimum induced energy loss; (3) the extension of the theory of the screw propeller of minimum energy loss f… more
Date: February 1940
Creator: Reissner, Hans
open access

Damping formulas and experimental values of damping in flutter models

Description: The problem of determining values of structural damping for use in flutter calculations is discussed. The concept of equivalent viscous damping is reviewed and its relation to the structural damping coefficient g introduced in NACA Technical Report No. 685 is shown. The theory of normal modes is reviewed and a number of methods are described for separating the motions associated with different modes. Equations are developed for use in evaluating the damping parameters from experimental data. Ex… more
Date: February 1940
Creator: Coleman, Robert P.
open access

Wind-tunnel investigation of an NACA 23030 airfoil with various arrangements of slotted flaps

Description: An investigation was made of a large-chord NACA 23030 airfoil with a 40- and a 25.66 percent-chord slotted flap to determine the section aerodynamic characteristics of the airfoil affected by flap chord, slot shape, flap position, and flap deflection. The flap positions for maximum lift, the position for minimum drag at moderate and high lift coefficients, and the complete section aerodynamic characteristics of selected optimum arrangements are given. Envelope polar of various flap arrangements… more
Date: March 1940
Creator: Recant, I. G.
Back to Top of Screen