Search Results

open access

Fabrication and Properties of Extruded Silver-Cadmium Control Rods

Description: The production of cross-type control rods having a span of 4-7/8 in., and an arm thickness of 1/8 in., was studied. Extrusion techniques were developed for producing cross-type control rods from each of two alloys; one containing 75% silver-25% cadmium, and the other containing 67% silver-30% cadmium-3% copper. Fabrication of the extruded crosses into clad control rods for the Mark I naval reactor was attempted. A set of unclad control rods for the Zero Power Reactor was produced. The effect of… more
Date: January 1952
Creator: Dwight, Austin E. (Austin Elbert), 1919-
open access

Chemical Engineering Division Summary Report October, November, and December, 1953

Description: Progress is reported on (1) experimental breeder reactor program, (2) solvent extraction, (3) fluoride volatilization separation process, (4) elevated temperature separations, (5) denitration of uranyl nitrate in a fluidized bed, (6) development of analytical techniques, (7) processing and utilization of radioactive wastes.
Date: January 1, 1954
Creator: Lawroski, Stephen & Stevenson, C. E.
open access

Plutonium Production Analysis - Graphical Method

Description: In the a study of plutonium production, the analytical solutions of the various isotope production equations are difficult and time consuming when spatial variation of the flux is considered. In an effort to reduce the time and labor required to determine the integrated production of a given thermal reactor, a graphical method of analysis is presented. The method is based on the assumption that the reactor may be divided into a relatively small number of regions such that the flux in each of th… more
Date: January 1954
Creator: Mumm, J. F. & Templin L. J.
open access

Chemistry Division, Section C-II, Summary Report for July, August, and September 1952

Description: This report deals with the (1.1) physical properties of graphite, (1.2) effects of pile irradiation on the properties of graphite, (1.3) effect of irradiation on "ceramic" materials, (1.4) effects of radiation on ice -- the x-ray induced luminescence of ice, (1.5) investigation of color centers and other optical properties of single crystals. (2.1) radiation chemistry of liquids, (2.2) application of mass spectrometry to chemical problems, (2.3) vapor pressure and heat of vaporization of uraniu… more
Date: January 21, 1953
Creator: Gilbreath, J. R. & Simpson, O. C.
open access

The Process Equipment and Protective Enclosures Designed for the Fuel Fabrication Facility: Facility #350

Description: Report issued by the Argonne National Laboratory discussing the design and construction of equipment for reactor fuels. As stated in the summary, "the report describes the development, prototype construction, methods of testing, and leak detection of a modular hood design to be used in housing equipment and processes for the Argonne National Laboratory Fuel Fabrication Facility" (p. 9). This report includes tables, illustrations, and photographs.
Date: January 1956
Creator: Shuck, A. B. & Mayfield, R. M.
open access

Autoclave Testing of Mechanically Jacketed Thorium Slugs In Water

Description: Water corrosion tests on mechanically jacketed and pinholed thorium slugs show that these slugs fail in a manner similar to that observed for mechanically jacketed and tested uranium slugs. The proposed mechanism for the water corrosion of these jacketed slugs is analogous to the water corrosion mechanism of jacketed uranium slugs presented in the project lecture. A bare thorium slug appeared to be more resistant to corrosion by water than a mechanically jacketed slug during the first half of t… more
Date: January 29, 1953
Creator: Yaggee, Frank L.
open access

Techniques for X-Ray Examinations of End-Weld Closures and Can-to-Cap Brazes on CP-6 Type Fuel Elements : Final Report -- Metallurgy Program 7.7.7

Description: A fuel element assembly in which a uranium slug is bonded to an impact extruded aluminum can by means of aluminum-silicon eutectic, and in which the can is capped with a thin aluminum disc, brazed and welded to the can, may contain,(a) imperfections common to brazed and welded metal sections, and (b) inhomogeneities arising from oxidation of uranium, and alloy formation between uranium, aluminum and silicon.
Date: January 20, 1954
Creator: Sidhu, S. S.
open access

Chemistry Division, Section C-II, Summary Report for July, August, and September 1952

Description: This report deals with the (1.1) physical properties of graphite, (1.2) effects of pile irradiation on the properties of graphite, (1.3) effect of irradiation on "ceramic" materials, (1.4) effects of radiation on ice -- the x-ray induced luminescence of ice, (1.5) investigation of color centers and other optical properties of single crystals. (2.1) radiation chemistry of liquids, (2.2) application of mass spectrometry to chemical problems, (2.3) vapor pressure and heat of vaporization of uraniu… more
Date: January 21, 1953
Creator: Gilbreath, J. R. & Simpson, O. C.
open access

Technical Review of ZPR-1 Accidental Transient - the Power Excursion, Exposures, and Clinical Data

Description: On June 2, 1952, 15:52 hours, a large reactivity change was made manually in a ZPR-1 assembly causing a power excursion of about one kwh, which resulted in damage to the reactor core components and radiation exposure of some of the operating personnel to perhaps several rep. None of the contributing causes is reviewed here nor are the measures which were taken to reduce the probability of a recurrence discussed since these are considered administrative matters beyond the scope of this technical… more
Date: January 26, 1953
Creator: Brittan, R. O.; Hasterlik, R. J.; Marinelli, L. D. & Thalgott, F. W.
Back to Top of Screen