UNT Libraries Government Documents Department - 433,392 Matching Results

Search Results

open access

Fabrication of high-density cantilever arrays and through-wafer interconnects

Description: Processes to fabricate dense, dry released microstructures with electrical connections on the opposite side of the wafer are described. A 10 x 10 array of silicon and polysilicon cantilevers with high packing density (5 tips/mm<sup>2</sup>) and high uniformity (<10 µm length variation across the wafer) are demonstrated. The cantilever release process uses a deep SF<sub>6</sub>/C<sub>4</sub>F<sub>8</sub>, plasma etch followed by a HBr plasma etch to accurately release cantilevers. A process for … more
Date: November 3, 1998
Creator: A. Harley, J.; Abdollahi-Alibeik, S.; Chow, E. M.; Kenney, T. W.; McCarthy, A. M.; McVittie, J. P. et al.
open access

Effects of Global Boundary and Local Collisionality on Magnetic Reconnection in a Laboratory Plasma

Description: The magnetic reconnection process is studied in a wide range of operating conditions in the well-controlled Magnetic Reconnection Experiment. The reconnection rate is observed to be a function of both global (i.e., system size) and local (collisionality) plasma parameters. When only local collisionality is lowered, the current sheet is shortened while effective resistivity is enhanced, both accelerating reconnection rates. At a fixed collisionality, the current sheet length increases with syste… more
Date: July 24, 2007
Creator: A. Kuritsyn, H. Ji, S.P. Gerhardt, Y. Ren, and M. Yamada
open access

The Muon LINAC for the International Design Study of the Neutrino Factory

Description: The first stage of muon acceleration in the Neutrino Factory utilises a superconducting linac to accelerate muons from 244 MeV to 900 MeV. The linac was split into three types of cryomodules with decreasing magnetic fields and increasing amounts of RF voltage but with the design of the superconducting solenoid and RF cavities being the same for all cryomodules. The current status of the muon linac for the International Design Study for the Neutrino Factory will be presented including a final la… more
Date: September 1, 2011
Creator: A. Kurup, C. Bontoiu, Morteza Aslaninejad, J. Pozimski, A. Bogacz, V.S. Morozov, Y.R. Roblin, K.B. Beard
open access

Pressure-induced Breaking of Equilibrium Flux Surfaces in the W7AS Stellarator

Description: Calculations are presented for two shots in the W7AS stellarator which differ only in the magnitude of the current in the divertor control coil, but have very different values of experimentally attainable β (<β> ≈ 2.7% versus <β> ≈ 1.8%). Equilibrium calculations find that a region of chaotic magnetic field line trajectories fills approximately the outer 1/3 of the cross-section in each of these configurations. The field lines in the stochastic region are calculated to behave as if the flux sur… more
Date: April 24, 2007
Creator: A. Reiman, M.C. Zarnstorff, D. Monticello, A. Weller, J. Geiger, and the W7-AS Team
open access

Analysis of NSTX Upgrade OH Magnet and Center Stack

Description: The new ohmic heating (OH) coil and center stack for the National Spherical Torus Experiment (NSTX) upgrade are required to meet cooling and structural requirements for operation at the enhanced 1 Tesla toroidal field and 2 MA plasma current. The OH coil is designed to be cooled in the time between discharges by water flowing in the center of the coil conductor. We performed resistive heating and thermal hydraulic analyses to optimize coolant channel size to keep the coil temperature below 100 … more
Date: November 30, 2010
Creator: A. Zolfaghari, P. Titus, J. Chrzanowski, A. Salehzadeh, F. Dahlgren
open access

In-situ spectro-microscopy on organic films: Mn-Phthalocyanine on Ag(100)

Description: Metal phthalocyanines are attracting significant attention, owing to their potential for applications in chemical sensors, solar cells and organic magnets. As the electronic properties of molecular films are determined by their crystallinity and molecular packing, the optimization of film quality is important for improving the performance of organic devices. Here, we present the results of in situ low-energy electron microscopy / photoemission electron microscopy (LEEM/PEEM) studies of incorpor… more
Date: August 18, 2013
Creator: A., Al-Mahboob; Vescovo, E. & Sadowski, J.T.
open access

Some Comments on the La Primavera Geothermal Field, Mexico

Description: The La Primavera geothermal field is located about 20 km west of the city of Guadalajara, Jalisco, in the western part of the Mexican Neovolcanic Axis. Initial results of five deep exploration wells (down to 2000 m depth) were very promising; measured downhole temperatures exceed 300/sup 0/C. During production, however, downhole temperatures dropped, and the chemistry of the fluids changed. The analysis of geologic, mineralogic, geochemical, and well completion data indicate that colder fluids … more
Date: December 1, 1983
Creator: A., B. Dominguez & Lippmann, M. J.
open access

Mexican-American Cooperative Program at the Cerro Prieto Geothermal Field: Recent Results of the Well-Drilling Program at Cerro Prieto

Description: The results of the 1980 and 1981 well drilling activities at the Cerro Prieto geothermal field are summarized. Details are given on the new series of deeper wells completed in the western (older) part of the field (Cerro Prieto I), and on the development and step-out wells drilled in the eastern part of the field (Cerro Prieto II and III). Production characteristics of on-line and standby wells are discussed. Recent changes in well completion procedures are also described.
Date: December 1, 1981
Creator: A., B. Dominguez; Lippmann, M. J. & M., Francisco Bermejo
open access

Some Comments on the La Primavera Geothermal Field, Mexico

Description: The La Primavera geothermal field is located about 20 km west of the city of Guadalajara, Jalisco, in the western part of the Mexican Neovolcanic Axis. Initial results of five deep exploration wells (down to 2000 m depth) were very promising; measured downhole temperatures exceed 300{degrees}C. During production, however, downhole temperatures dropped, and the chemistry of the fluids changed. The analysis of geologic, mineralogic, geochemical, and well completion data indicate that colder fluid… more
Date: December 15, 1983
Creator: A., Bernardo Dominguez & Lippmann, Marcelo J.
open access

Extending Performance and Evaluating Risks of PV Systems Failure Using a Fault Tree and Event Tree Approach: Analysis of the Possible Application

Description: Performance and reliability of photovoltaic (PV) systems are important issues in the overall evaluation of a PV plant and its components. While performance is connected to the amount of energy produced by the PV installation in the working environmental conditions, reliability impacts the availability of the system to produce the expected amount of energy. In both cases, the evaluation should be done considering information and data coming from indoor as well as outdoor tests. In this paper a w… more
Date: June 3, 2012
Creator: A., Colli
Back to Top of Screen