You limited your search to:

  Partner: UNT Libraries Government Documents Department
 Decade: 1970-1979
 Collection: Technical Report Archive and Image Library
Coupled Hydrodynamic-Structural Response Analysis of Piping Systems

Coupled Hydrodynamic-Structural Response Analysis of Piping Systems

Date: 1978?
Creator: A-Moneim, M. T.
Description: This report describes in detail the expansion of the ICEPEL code for the coupled hydrodynamic-structural response analysis of pipe-elbow loops to general piping systems. A generalized piping-component model, a branching tce junction, and a surge-tank model are introduced and coupled with the pipe-elbow loop model so that a general piping system under the effect of internally traveling pressure pulses can be analyzed hydrodynamically, as well as structurally.
Contributing Partner: UNT Libraries Government Documents Department
ICEPEL Analysis of and Comparison with Simple Elastic-Plastic Piping Experiments

ICEPEL Analysis of and Comparison with Simple Elastic-Plastic Piping Experiments

Date: December 1978
Creator: A-Moneim, M. T.
Description: The results of simple elastic-plastic piping experiments for straight pipes and single-elbow loop systems are interpreted and evaluated. The experiments are also analyzed by the ICEPEL piping code, and the analytical results are compared against the experimental data.
Contributing Partner: UNT Libraries Government Documents Department
Transportation of Iron Ore, Limestone, and Bituminous Coal on the Great Lakes Waterway System: With Projections to 1995

Transportation of Iron Ore, Limestone, and Bituminous Coal on the Great Lakes Waterway System: With Projections to 1995

Date: 1970
Creator: Aase, James H.
Description: Report issued by the U.S. Bureau of Mines discussing the transportation of minerals on the Great Lakes Waterway System. As stated in the abstract, "this study provides data on the physical and hydrological makeup of the Great Lakes waterway system and forecasts quantities, traffic patterns, and shipping cost of prospective bulk mineral commerce projected to be transported upon it" (p. 1). This report includes maps, tables, and illustrations.
Contributing Partner: UNT Libraries Government Documents Department
Modifications to Filling and Emptying System of Lock No. 1, Mississippi River, Minneapolis, Minnesota =: Hydraulic Model Investigation

Modifications to Filling and Emptying System of Lock No. 1, Mississippi River, Minneapolis, Minnesota =: Hydraulic Model Investigation

Date: December 1979
Creator: Ables, Jackson H.
Description: From abstract: The existing locks at Locks and Dam No. 1 were constructed between 1929 and 1932. Problems have been experienced with accumulation of ice and debris at the intakes, air entrapment in the culverts of the filling and emptying system, excessive turbulence in the lock chamber during filling, and hazardous conditions downstream from the locks during emptying operations.
Contributing Partner: UNT Libraries Government Documents Department
Divide Cut Drainage Structures Tennessee-Tombigbee Waterway Mississippi and Alabama: Hydraulic Model Investigation

Divide Cut Drainage Structures Tennessee-Tombigbee Waterway Mississippi and Alabama: Hydraulic Model Investigation

Date: October 1976
Creator: Ables, Jackson H., Jr.
Description: Report on model tests related to drainage structures for the Tennessee-Tombigbee Waterway to provide recommendations about construction.
Contributing Partner: UNT Libraries Government Documents Department
Handbook of Mathematical Functions With Formulas, Graphs, and Mathematical Tables

Handbook of Mathematical Functions With Formulas, Graphs, and Mathematical Tables

Date: December 1972
Creator: Abramowitz, Milton 1915-1958 & Stegun, Irene A.
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Advanced Fuel Cell Development Progress Report: January-March 1978

Advanced Fuel Cell Development Progress Report: January-March 1978

Date: 1977?
Creator: Ackerman, J. P.; Ackerman, J. P.; Pierce, Robert Dean; Nelson, P. A.; Arons, R. M.; Kinoshita, K. et al.
Description: Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes the development of electrolyte structures which have good electrolyte retention and mechanical properties as well as long term stability, and on developing methods of synthesis amenable to mass production.
Contributing Partner: UNT Libraries Government Documents Department
Advanced Fuel Cell Development Progress Report: October-December 1977

Advanced Fuel Cell Development Progress Report: October-December 1977

Date: March 1978
Creator: Ackerman, J. P.; Kinoshita, K.; Finn, P. A.; Sim, J. W. & Nelson, P. A.
Description: Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes work aimed at understanding and improving the performance of fuel cells having molten alkali-carbonate mixtures as electrolytes; the fuel cells operate at temperatures near 925 K.
Contributing Partner: UNT Libraries Government Documents Department
Advanced Fuel Cell Development Progress Report: April-June 1977

Advanced Fuel Cell Development Progress Report: April-June 1977

Date: August 1977
Creator: Ackerman, J. P.; Pierce, R. D.; Nelson, P. A. & Arons, R. M.
Description: Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes activities directed toward understanding and improvement of molten-carbonate-electrolyte fuel cells operating at temperatures near 923 Kelvin.
Contributing Partner: UNT Libraries Government Documents Department
Advanced Fuel Cell Development Progress Report: July-September 1977

Advanced Fuel Cell Development Progress Report: July-September 1977

Date: November 1977
Creator: Ackerman, J. P.; Pierce, R. D.; Nelson, P. A.; Arons, R. M.; Kinoshita, K.; Sim, J. W. et al.
Description: Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL).
Contributing Partner: UNT Libraries Government Documents Department
Advanced Fuel Cell Development Progress Report: April-June 1978

Advanced Fuel Cell Development Progress Report: April-June 1978

Date: August 1978
Creator: Ackerman, J. P.; Pierce, Robert Dean; Nelson, P. A.; Arons, R. M.; Kinoshita, K.; Sim, J. W. et al.
Description: Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes efforts directed toward understanding and improving the components of molten-carbonate-electrolyte fuel cells operated at temperatures near 925 K.
Contributing Partner: UNT Libraries Government Documents Department
Advanced Fuel Cell Development: Progress Report for July-September 1978

Advanced Fuel Cell Development: Progress Report for July-September 1978

Date: May 1979
Creator: Ackerman, J. P.; Pierce, Robert Dean; Nelson, P. A.; Arons, R. M.; Kinoshita, K.; Sim, J. W. et al.
Description: Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes activities focuses on the development of electrolyte structures that have good electrolyte retention and mechanical properties as well as long term stability, and on developing methods of synthesis amenable to mass production.
Contributing Partner: UNT Libraries Government Documents Department
SYN3D: a Single-Channel, Spatial Flux Synthesis Code for Diffusion Theory Calculations

SYN3D: a Single-Channel, Spatial Flux Synthesis Code for Diffusion Theory Calculations

Date: 1976
Creator: Adams, C. H.
Description: This report is a user's manual for SYN3D, a computer code which uses single-channel, spatial flux synthesis to calculate approximate solutions to two- and three-dimensional, finite-difference, multi-group neutron diffusion theory equations. SYN3D is designed to run in conjunction with any one of several one- and two-dimensional, finite-difference codes (required to generate the synthesis expansion functions) currently being used in the fast reactor community. The report describes the theory and equations, the use of the code, and the implementation on the IBM 370/195 and CDC 7600 of the version of SYN3D available through the Argonne Code Center.
Contributing Partner: UNT Libraries Government Documents Department
A Field Test of Selected Insects and Pathogens for Control of Waterhyacinths, Report 1: Preliminary Results for the 1975-76 Season

A Field Test of Selected Insects and Pathogens for Control of Waterhyacinths, Report 1: Preliminary Results for the 1975-76 Season

Date: September 1977
Creator: Addor, Eugene E.
Description: "During the growing season of 1975, a field experiment was initiated on Lake Concordia, Louisiana, to test the potential effectiveness of selected organisms as control agents against waterhyacinths, Eichhornia crassipes (Mart.) Solms. [...] This report describes the experiment, presents the collected data, and summarizes the observations. Statistical analyses and interpretation of the data are also presented" (abstract).
Contributing Partner: UNT Libraries Government Documents Department
Earthquake Resistance of Earth and Rock-Fill Dams, Report 2: Analysis of Response of Rifle Gap Dam to Project Rulison Underground Nuclear Detonation

Earthquake Resistance of Earth and Rock-Fill Dams, Report 2: Analysis of Response of Rifle Gap Dam to Project Rulison Underground Nuclear Detonation

Date: June 1972
Creator: Ahlberg, James E.; Fowler, Jack & Heller, Lyman W.
Description: Summary: The motion of Rifle Gap Dam was measured in September 1969 during the Project RULISON underground nuclear explosion. The observed response was then compared with the response computed in a mathematical model. Observed and computed responses were similar. From this study it appears that the mathematical models used are applicable to the design and analysis of soil structures, at least for ground motion intensities comparable to those observed at Rifle Gap Dam. (p. xi).
Contributing Partner: UNT Libraries Government Documents Department
Numerical Integration of Large Deflection Elastic-Plastic Axisymmetric Shells of Revolution

Numerical Integration of Large Deflection Elastic-Plastic Axisymmetric Shells of Revolution

Date: December 1976
Creator: Ahmed, Habib Uddin
Description: The improvement in the method of large deflection elastic-plastic analysis of shells and other structures appears to have continued interest. With the development in this work an improved numerical suppression scheme is now available for the large deflection elastic-plastic analysis of axisymmetric shells of revolution subjected to symmetric loadings. Quasi-linearization of Sander's non-linear shell equations is presented for the first time. With these quasi-linearized equations the suppression scheme has been developed to solve non-linear boundary-value problems. This suppression scheme has been used in conjunction with a Newton-Raphson method to improve a stable convergence process at the yield surface in elastic-plastic problems. Results presented indicate the accuracy of this numerical scheme. It appears to be possible to extend this method for more complicated situations.
Contributing Partner: UNT Libraries Government Documents Department
Development and Demonstration of Compound Parabolic Concentrators for Solar Thermal Power Generation and Heating and Cooling Applications, Progress Report: July-December 1975

Development and Demonstration of Compound Parabolic Concentrators for Solar Thermal Power Generation and Heating and Cooling Applications, Progress Report: July-December 1975

Date: 1977
Creator: Allen, John W.; Levitz, Norman M.; Rabl, Ari; Reed, Kent A.; Schertz, William W.; Thodos, George et al.
Description: Progress report describing the development of Compound Parabolic Concentrators (CPC). A tenfold concentrator with a cavity receiver was constructed and tested. The optical efficiency was very good (65 percent), but the thermal performance was degraded by heat losses of the cavity receiver. A summary of the results of subcontracts described in the previous progress report are presented, and the influence of these results on ANL programs is noted.
Contributing Partner: UNT Libraries Government Documents Department
An Interim Report on the Development and Application of Environmental Mapped Data Digitization, Encoding, Analysis, and Display Software for the ALICE System, Volume 1

An Interim Report on the Development and Application of Environmental Mapped Data Digitization, Encoding, Analysis, and Display Software for the ALICE System, Volume 1

Date: June 1979
Creator: Amiot, L. W.; Lima, R. J.; Scholbrock, S. D.; Shelman, C. B. & Wehman, R. H.
Description: Report discusses the development of the existing ALICE Image Processing System into a computer-aided digitization, encoding, analysis and display system for mapped information pertaining to the environment and its elements.
Contributing Partner: UNT Libraries Government Documents Department
An Overview of Pool-Type LMFBRs : General Characteristics

An Overview of Pool-Type LMFBRs : General Characteristics

Date: May 1976
Creator: Amorosi, A.; Hutter, E.; Marciniak, T. J.; Monson, H. O.; Seidensticker, R. W. & Simmons, W. R.
Description: This report describes the results of a study conducted by a "Pool Study Group" organized at ANL in mid-1975 to examine the present state of the air of design of pool-type LMFBRs. The study concentrated on examination of various design options used to date in the principle pool-type projects and design studies in this country and abroad, including the Phenix and Super-Phenix reactors (France), PFR and CFR (U.K.), RN-600 (U.S.S.R.) and EBR-II (U.S.A.). The objective of the report is to provide a step toward better understanding of the pool-type system and of the advantages and disadvantages of the various possible approaches to its design.
Contributing Partner: UNT Libraries Government Documents Department
Final Report on the Small-Scale Vapor-Explosion Experiments Using a Molten NaCl-H2O System

Final Report on the Small-Scale Vapor-Explosion Experiments Using a Molten NaCl-H2O System

Date: April 1976
Creator: Anderson, R. P. & Bova, L.
Description: Vapor explosions were produced by injecting small quantities of water into a container filled with molten sodium chloride. Minimum explosion efficiencies, as evaluated from reaction-impulse measurements, were relatively large. Subsurface movies showed that the explosions resulted from a two-step sequence: an initial bulk-mixing phase in which the two liquids intermix on a large scale, but remain locally separated by an insulating gas-vapor layer; and a second step, immediately following breakdown of the gas layer, during which the two liquids locally fragment, intermix, and pressurize very rapidly. The experimental results were compared with various mechanistic models that had been proposed to explain vapor explosions. Early models seemed inconsistent with the results. More recent theories suggest that vapor explosions may be caused by a nucleation limit or by dynamic mixing combined with high surface-heat-transfer rates. Both types of models are consistent with the results.
Contributing Partner: UNT Libraries Government Documents Department
Survey and Status Report on Application of Acoustic-Boiling-Detection Techniques to Liquid-Metal-Cooled Reactors

Survey and Status Report on Application of Acoustic-Boiling-Detection Techniques to Liquid-Metal-Cooled Reactors

Date: April 1970
Creator: Anderson, T. T.; Mulcahey, T. P. & Hsu, C.
Description: Report issued by the Argonne National Laboratory discussing acoustic-boiling-detection techniques. As stated in the abstract, "this report summarizes literature through June 1967 concerning acoustic methods. In the acoustic method for boiling detection, either acoustic waveguides or high-temperature acoustic sensors are recommended" (p. 1). This report includes tables, and illustrations.
Contributing Partner: UNT Libraries Government Documents Department
Tentative Provisions for the Development of Seismic Regulations for Buildings: A Cooperative Effort with the Design Professions, Building Code Interests, and the Research Community

Tentative Provisions for the Development of Seismic Regulations for Buildings: A Cooperative Effort with the Design Professions, Building Code Interests, and the Research Community

Date: June 1978
Creator: Applied Technology Council
Description: Report issued by the U.S. National Bureau of Standards discussing building codes and standards in earthquake-prone areas. As stated in the introduction, "the basic purpose of this project is to present, in one comprehensive document, current state-of-knowledge in the fields of engineering seismology and engineering practice as it pertains to seismic design and construction of buildings" (p. 1). This report includes tables, and illustrations.
Contributing Partner: UNT Libraries Government Documents Department
Geographical Variation in the Heating and Cooling Requirements of a Typical Single-Family House, and Correlation of These Requirements to Degree Days

Geographical Variation in the Heating and Cooling Requirements of a Typical Single-Family House, and Correlation of These Requirements to Degree Days

Date: November 1978
Creator: Arens, Edward A. & Carroll, William L.
Description: Report issued by the Bureau of Mines discussing the heating and cooling requirements for single-family homes. These requirements are determined from "Test Reference Year," or TRY data and long-term geographic climate information. This report includes tables, illustrations, photographs, and a map.
Contributing Partner: UNT Libraries Government Documents Department
A Residential Energy Consumption Analysis Utilizing the DOE-1 Computer Program

A Residential Energy Consumption Analysis Utilizing the DOE-1 Computer Program

Date: April 1979
Creator: Arentsen, Scott K.
Description: The DOE-1 computer program under development by Argonne National Laboratory, Lawrence Berkeley Laboratory, and Los Alamos Scientific Laboratory is used to examine energy consumption in a typical middle-class household in Cincinnati, Ohio. The program is used to compare energy consumption under different structural and environmental conditions including various levels of insulation in the walls and ceiling, double and single glazing of windows, and thermostat setback schedules.
Contributing Partner: UNT Libraries Government Documents Department
FIRST PREV 1 2 3 4 5 NEXT LAST