UNT Libraries Government Documents Department - 439 Matching Results

Search Results

Results: 1 - 24 next
open access

Strain-Gage Measurements of Buffeting Loads on a Jet-Powered Bomber Airplane

Description: Buffet boundaries, buffeting-load increments for the stabilizers and elevators, and buffeting bending-moment increments for the stabilizers and wings as measured in gradual maneuvers for a jet-powered bomber airplane are presented. The buffeting-load increments were determined from strain-gage measurements at the roots or hinge supports of the various surfaces considered. The Mach numbers of the tests ranged from 0.19 to 0.78 at altitudes close to 30,000 feet. The predominant buffet frequencies… more
Date: March 19, 1951
Creator: Aiken, William S., Jr. & See, John A.
Item Type: Refine your search to only Report
open access

Drag Measurements of Symmetrical Circular-Arc and NACA 65-009 Rectangular Airfoils Having an Aspect Ratio of 2.7 as Determined by Flight Tests at Supersonic Speeds

Description: Report discussing testing to determine the drag characteristics at zero lift of a wing with a circular-arc airfoil section with a maximum thickness of 9 percent chord. The results were compared to previous testing on an NACA 65-009 airfoil. It was found that the NACA airfoil had lower drag coefficients than the circular-arc airfoil tested in this experiment.
Date: March 7, 1947
Creator: Alexander, Sidney R.
Item Type: Refine your search to only Report
open access

Experimental Static Aerodynamic Forces and Moments at High Subsonic Speeds on a Missile Model During Simulated Launching From Unswept-, Sweptback-, and Modified-Delta-Wing-Fuselage Combinations at Zero Sideslip

Description: Report presenting an investigation in the high-speed tunnel to determine the static aerodynamic forces and moments on a missile model during simulated launching from midsemispan locations of various types of wings. The purpose of the investigation is to determine the nature and origin of the mutual interference experienced by various combinations of wing-fuselage models and externally carried missiles. Results regarding isolated missile characteristics, the effect of varying chordwise position,… more
Date: March 19, 1957
Creator: Alford, William J., Jr. & King, Thomas J., Jr.
Item Type: Refine your search to only Report
open access

Characteristics of flow over inclined bodies of revolution

Description: From Summary: "Experimental force, moment, and center-of-pressure variations for a large number of bodies of revolution have been compared with the calculated characteristics based on the approximate theory developed in NACA-RM-A9I26. The bodies varied in fineness ratio from 4.5 to 21.1, from blunt unboattailed bodies to airship hulls, and the experimental results are given for widely varying Mach number ranges of angle of attack. It is shown that the lift and drag characteristics are fairly ac… more
Date: March 5, 1951
Creator: Allen, H. Julian & Perkins, Edward W.
Item Type: Refine your search to only Report
open access

Force and pressure recovery characteristics at supersonic speeds of a conical spike inlet with a bypass discharging from the top or bottom of the diffuser in an axial direction

Description: Force and pressure-recovery characteristics of a nacelle-type conical-spike inlet with a fixed-area bypass located in the top or bottom of the diffuser are presented for flight Mach numbers of 1.6, 1.8, and 2.0 for angles of attack from 0 degrees to 9 degrees. Top or bottom location of the bypass did not have significant effects on diffuser pressure-recovery, bypass mass-flow ratio, or drag coefficient over the range of angles of attack, flight Mach numbers, and stable engine mass-flow ratios i… more
Date: March 23, 1953
Creator: Allen, J. L. & Beke, Andrew
Item Type: Refine your search to only Report
open access

Some Measurements of Flying Qualities of a Douglas D-558-II Research Airplane During Flights to Supersonic Speeds

Description: Report presenting some measurements of the dynamic lateral stability and lateral and longitudinal trim of a Douglas D-558-II in flights up to a Mach number of 1.87 and an altitude of about 67,000 feet. Testing indicated that the airplane flying in low density air at supersonic speeds had poor dynamic lateral stability, which worsened as the Mach number was increased to 1.85.
Date: March 10, 1953
Creator: Ankenbruck, Herman O. & Dahlen, Theodore E.
Item Type: Refine your search to only Report
open access

Some approximate methods for estimating the effects of aeroelastic bending of rocket-propelled model-booster combinations

Description: Report presenting methods for estimating the aeroelastic effects and structural requirements of rocket-propelled model-booster combinations that are nearly symmetrical. The methods differ principally in the manner in which booster stiffness, reference axis, and inertia loading are considered. Special conditions and accuracy for each of the three models are provided.
Date: March 27, 1953
Creator: Arbic, Richard G.; White, George & Gillespie, Warren, Jr.
Item Type: Refine your search to only Report
open access

High Speed Stability and Control Characteristics of a 0.17-Scale Model of the McDonnell XF2H-1 Airplane (TED No. NACA DE 318)

Description: "High-speed wind-tunnel tests were conducted of two versions of a 0.17-scale model of the McDonnell XF2H-1 airplane to ascertain the high-speed stability and control characteristics and to study means for raising the high-speed buffet limit of the airplane, The results for the revised model, employing a thinner wing and tail than the original model, revealed a mild diving tendency from 0.75 to 0.80 Mach number, followed by a marked climbing tendency from 0.80 to 0.875 Mach number. The high-spee… more
Date: March 31, 1949
Creator: Axelson, John A. & Emerson, Horace F.
Item Type: Refine your search to only Report
open access

The Effects of Horizontal-Tail Height and a Partial-Span Leading-Edge Extension on the Static Longitudinal Stability of a Wing-Fuselage-Tail Combination Having a Sweptback Wing

Description: Memorandum presenting an investigation made to valuate the effects of vertical height of the horizontal tail on the static longitudinal stability of a model with a wing with 35 degrees of sweepback, an aspect ratio of 4.5, a taper ratio of 0.5, and NACA 64A010 sections. The investigation also included the effects of adding a partial-span, leading-edge chord extension to the outer portions of the wing. Results regarding the effect of tail height, wing-wake and local downwash measurements, and ef… more
Date: March 9, 1954
Creator: Bandettini, Angelo & Selan, Ralph
Item Type: Refine your search to only Report
open access

Initial Flight Tests of the NACA FR-2, a High-Velocity Rocket-Propelled Vehicle for Transonic Flutter Research

Description: Report presenting initial flight tests of two simplified flutter vehicles. Test results were in agreement with the results of the freely-falling-body test in that the wing failures in the transonic range occurred at velocities greater than the flutter velocity calculated from the two-dimensional theory.
Date: March 4, 1948
Creator: Barmby, J. G. & Teitelbaum, J. M.
Item Type: Refine your search to only Report
open access

Flight Test of an End-Burning Solid-Fuel Ramjet

Description: Report presenting a flight investigation of a rocket-launched ram-jet engine incorporating an end-burning solid fuel. Results regarding acceleration, altitude, booster separation, survival time of booster adapter, and air specific impulse are provided.
Date: March 25, 1954
Creator: Bartlett, Walter A., Jr.
Item Type: Refine your search to only Report
open access

Wind-Tunnel Investigation of Wing Inlets for a Four-Engine Airplane

Description: Report presenting an investigation in the propeller-research tunnel to develop wing-leading-edge inlets for locations between the inboard and outboard nacelles on each wing of a four-engine airplane. Testing was performed on the basic wing and original inlet as well as NACA-developed inlets for two versions of the airplane.
Date: March 11, 1947
Creator: Bartlett, Walter A., Jr. & Goral, Edwin B.
Item Type: Refine your search to only Report
open access

Temperature Drops Through Liquid-Cooled Turbine Blades With Various Cooling-Passage Geometries

Description: Memorandum presenting the effects of variations in cooling-passage geometry on the relations between heat flow and temperature drops within liquid-cooled turbine blades. Wall thicknesses, blade section depths, and cooling-passage sizes, shapes, and spacings were varied experimentally on a simple electric analog on which are simulated rectangular sections of blades. Results are presented in terms of temperature differences between the cooled-surface temperature and average heated-surface tempera… more
Date: March 23, 1956
Creator: Bartoo, Edward R.
Item Type: Refine your search to only Report
open access

Wind-tunnel investigation at Mach 1.9 of multijet-missile base pressures

Description: From Summary: "An experimental wind-tunnel investigation was conducted at Mach 1.9 to determine the pressures acting on the base of a multijet missile using unheated air and carbon dioxide as jet fluids. The variation of base pressure with jet static-pressure ratio was compared with results estimated for an axisymmetric single-jet model and some correlation was observed."
Date: March 3, 1955
Creator: Baughman, L. Eugene
Item Type: Refine your search to only Report
open access

Wind-Tunnel Data on the Longitudinal and Lateral-Directional Rotary Derivatives of a Straight-Wing, Research Airplane Configuration at Mach Numbers From 2.5 to 3.5

Description: Memorandum presenting the results of wind-tunnel oscillation tests to measure the rotary derivatives of a research airplane configuration at supersonic speeds. Measurements were made of the damping in yaw, pitch, and roll, the static longitudinal and directional stability derivatives, the effective-dihedral derivative, the rolling moment due to yawing, and the yawing moment due to rolling. The configuration was found to be statistically stable throughout the Mach number range, although its stab… more
Date: March 25, 1958
Creator: Beam, Benjamin H. & Endicott, Kenneth C.
Item Type: Refine your search to only Report
open access

Low-Speed Cascade Tests of Two 45 Degree Swept Compressor Blades With Constant Spanwise Loading

Description: Report discussing an investigation of two 45 degree swept blades in low-speed cascade tunnels at a range of angles of attack and various combinations of inlet-air angle and solidity. The isolated wing method used to design the blade predicted the twist distribution and camber shape necessary to obtain an almost uniform spanwise loading.
Date: March 15, 1954
Creator: Beatty, Loren A.; Savage, Melvyn & Emery, James C.
Item Type: Refine your search to only Report
open access

Performance of J-33-A-21 Turbojet-Engine Compressor I - Over-All Performance Characteristics at Equivalent Impeller Speeds from 6000 to 13,400 RPM

Description: "The NACA is investigating a series of J-33 turbojet-engine compressors to determine the over-all and component performances and to improve theories of flow through large centrifugal compressors, The production model J-33-A-21 was operated over a range of inlet temperatures from 80 to -40 F and inlet pressures from 14 to 5 inches mercury absolute for equivalent impeller speeds from 6000 to 13,400 rpm. At the equivalent design speed of 11,500 rpm, the compressor had a peak pressure ratio of 3.98… more
Date: March 30, 1948
Creator: Beede, William L.; Kovach, Karl & Creagh, John W. R.
Item Type: Refine your search to only Report
open access

Additional Abstracts Pertaining to Seaplanes

Description: "About 500 additional references pertaining to hydrodynamic design of seaplanes have been compiled, and the information is presented in the form of abstracts classified under six main headings:GENERAL INFORMATION, HYDROSTATICS, HYDRODYNAMICS, AERODYNAMICS, OPERATION, and RESEARCH. The compilation is an extension of NACA RM No. L6I13, entitled "Abstracts Pertaining to Seaplanes," by Jerold M. Bidwell and Douglas A. King. An author index and a subject index are included" (p. 1).
Date: March 9, 1948
Creator: Bidwell, Jerold M. & King, Douglas A.
Item Type: Refine your search to only Report
open access

Facilities and methods used in full-scale airplane crash-fire investigation

Description: The report includes a description of the test facilities and methods, crash configuration, layout of crash site, instrumentation, data-recording systems, and the post-crash examination procedure of the fullscale crash-fire investigation, which is part of a comprehensive study of the airplane crash-fire problem.
Date: March 10, 1952
Creator: Black, Dugald O.
Item Type: Refine your search to only Report
open access

Drag and longitudinal trim characteristics of a low-tail version of the North American YF-100A airplane as determined from the flight test at low lift of a 0.11-scale rocket-powered model at Mach numbers between 0.75 and 1.78

Description: Report presenting drag and longitudinal trim characteristics at low lift of a low-tail version of the North American YF-100A airplane as obtained from the flight test of a 0.11-scale rocket model at a range of Mach numbers. Longitudinal stability data and some qualitative damping-in-pitch data are also provided.
Date: March 29, 1954
Creator: Blanchard, Willard S., Jr.
Item Type: Refine your search to only Report
open access

Effects of wing-tip turrets on the aerodynamic characteristics of a typical bomber-wing model

Description: Report presenting wind-tunnel tests up to a Mach number of 0.85 to determine the effects of wing-tip gun turrets on the aerodynamic characteristics of a typical bomber-wing model. Lift, drag, and pitching-moment data are presented for the wing alone; for the wing with the turrets in the clean condition; and for the wing and the turrets with guns and sighting equipment. The turrets had negligible effect on the lift and pitching-moment characteristics of the wing.
Date: March 28, 1949
Creator: Boddy, Lee E. & Sutton, Fred B.
Item Type: Refine your search to only Report
open access

Measured Effective Thermal Conductivity of Uranium Oxide Powder in Various Gases and Gas Mixtures

Description: Memorandum presenting an investigation of the effective thermal conductivities of powders, which included uranium oxide UO(sub 2) powder with a density of 59.5 percent of the density of the solid uranium oxide at a range of temperatures. Helium, argon, and nitrogen gases and mixtures of helium-argon and xenon-krypton gases were introduced into the powder void, and the experimental effective thermal conductivities of the gas-powder mixtures were determined.
Date: March 3, 1955
Creator: Boegli, J. S. & Deissler, R. G.
Item Type: Refine your search to only Report
Back to Top of Screen