UNT Libraries Government Documents Department - 334 Matching Results

Search Results

prev Results: 49 - 72 next
open access

Theoretical study of air forces on an oscillating or steady thin wing in a supersonic main stream

Description: From Summary: "A theoretical study, based on the linearized equations of motion for small disturbance, is made of the air forces on wings of general plan forms moving forward at a constant supersonic speed. The boundary problem is set up for both the harmonically oscillating and the steady conditions. Two types of boundary conditions are distinguished, which are designated "purely supersonic" and "mixed supersonic." the method is illustrated by applications to a number of examples for both the … more
Date: June 4, 1947
Creator: Garrick, I. E. & Rubinow, S. I.
Item Type: Refine your search to only Report
open access

Voltera's Solution of the Wave Equation as Applied to Three-Dimensional Supersonic Airfoil Problems

Description: "A surface integral is developed which yields solutions of the linearized partial differential equation for supersonic flow. These solutions satisfy boundary conditions arising in wing theory. Particular applications of this general method are made, using acceleration potentials, to flat surfaces and to uniformly loaded lifting surfaces. Rectangular and trapezoidal plan forms are considered along with triangular forms adaptable to swept-forward and swept-back wings. The case of the triangular p… more
Date: September 1947
Creator: Heaslet, Max A.; Lomax, Harvard & Jones, Arthur L.
Item Type: Refine your search to only Report
open access

A unified theory of plastic buckling of columns and plates

Description: On the basis of modern plasticity considerations, a unified theory of plastic buckling applicable to both columns and plates has been developed. For uniform compression, the theory shows that long columns which bend without appreciable twisting require the tangent modulus and that long flanges which twist without appreciable bending require the secant modulus. Structures that both bend and twist when they buckle require a modulus which is a combination of the secant modulus and the tangent modu… more
Date: July 29, 1947
Creator: Stowell, Elbridge Z.
Item Type: Refine your search to only Report
open access

Accuracy of Airspeed Measurements and Flight Calibration Procedures

Description: From Summary: "The sources of error that may enter into the measurement of airspeed by pitot-static methods are reviewed in detail together with methods of flight calibration of airspeed installations. Special attention is given to the problem of accurate measurements of airspeed under conditions of high speed and maneuverability required of military airplanes." (author).
Date: 1948
Creator: Huston, Wilber B.
Item Type: Refine your search to only Report
open access

Effect of Screens in Wide-Angle Diffusers

Description: "An experimental investigation at low airspeeds was made of the filling effect observed when a screen or similar resistance is placed across a diffuser. The filling effect is found to be real in that screens can prevent separation or restore separated flow in diffusers even of extreme divergence and to depend principally on screen location and pressure-drop coefficient of the screen. Results are given for three different diffusers of circular cross section with a variety of screen arrangements.… more
Date: June 26, 1947
Creator: Schubauer, G. B. & Spangenberg, W. G.
Item Type: Refine your search to only Report
open access

The application of the statistical theory of extreme values to gust-load problems

Description: From Introduction: "Recent developments in the statistical theory of extreme values (references 4 to 10) have indicated a somewhat more rational approach to the problem of predicting the probability of occurrence The present report summarizes some of these findings, indicates the method of application, and evaluates their applicability to certain gust-load problems ."
Date: July 22, 1949
Creator: Press, Harry
Item Type: Refine your search to only Report
open access

Summary of Airfoil Data

Description: From Summary: "The historical development of NACA airfoils is briefly reviewed. New data are presented that permit the rapid calculation of the approximate pressure distributions for the older NACA four-digit and five-digit airfoils by the same methods used for the NACA 6-series airfoils. The general methods used to derive the basic thickness forms for NACA 6 and 7-series airfoils together with their corresponding pressure distributions are presented. Detail data necessary for the application o… more
Date: 1945
Creator: Abbott, Ira H.; von Doenhoff, Albert E. & Stivers, Louis S., Jr.
Item Type: Refine your search to only Report
open access

Experiments on Stability of Bunsen-Burner Flames for Turbulent Flow

Description: "The results of a study of the stability of propane-air flames on bunsen-burner tubes are presented. Fuel-air ratio, tube diameter, and Reynolds number were the primary variables. Regions of stability are outlined in plots of fuel-air ratio as a function of Reynolds number for flames seated on the burner lip and for flames suspended well above the burner" (p. 1).
Date: 1948
Creator: Bollinger, Lowell M. & Williams, David T.
Item Type: Refine your search to only Report
open access

Theoretical lift and damping in roll at supersonic speeds of thin sweptback tapered wings with streamwise tips, subsonic leading edges, and supersonic trailing edges

Description: "On the basis of linearized supersonic-flow theory, generalized equations were derived and calculations made for the lift and damping in roll of a limited series of thin sweptback tapered wings. Results are applicable to wings with streamwise tips and for a range of supersonic speeds for which the wing is wholly contained between the Mach cones springing from the wing apex and from the trailing edge of the root section. A further limitation is that the tip Mach lines may not intersect on the wi… more
Date: February 15, 1949
Creator: Malvestuto, Frank S., Jr.; Margolis, Kenneth & Ribner, Herbert S.
Item Type: Refine your search to only Report
open access

Critical Stress of Ring-Stiffened Cylinders in Torsion

Description: "A chart in terms of nondimensional parameters is presented for the theoretical critical stress in torsion of simply supported cylinders stiffened by identical equally spaced rings of zero torsional stiffness. The results are obtained by solving the equation of equilibrium by means of the Galerkin method. Comparison of the theoretical results with experimental results indicates that ring-stiffened cylinders buckle, on the average, at a buckling stress about 15 percent below the theoretical buck… more
Date: November 1949
Creator: Stein, Manuel; Sanders, J. Lyell, Jr. & Crate, Harold
Item Type: Refine your search to only Report
open access

Experimental investigation of the effects of viscosity on the drag and base pressure of bodies of revolution at a Mach number 1.5

Description: Models were tested to evaluate effects of Reynolds number for both laminar and turbulent boundary layers. Principal geometric variables investigated were afterbody shape and length-diameter ratio. Force tests and base-pressure measurements were made. Schlieren photographs were used to analyze the effects of viscosity on flow separation and shock-wave configuration and to verify the condition of the boundary layer as deduced from the force tests. The results are discussed and compared with theor… more
Date: January 31, 1947
Creator: Chapman, Dean R. & Perkins, Edward W.
Item Type: Refine your search to only Report
open access

The Stability of the Laminar Boundary Layer in a Compressible Fluid

Description: The present paper is a continuation of a theoretical investigation of the stability of the laminar boundary layer in a compressible fluid. An approximate estimate for the minimum critical Reynolds number, or stability limit, is obtained in terms of the distribution of the kinematic viscosity and the product of the mean density and mean vorticity across the boundary layer. The extension of the results of the stability analysis to laminar boundary-layer gas flows with a pressure gradient in the d… more
Date: September 5, 1946
Creator: Lees, Lester
Item Type: Refine your search to only Report
open access

Tank tests to determine the effect on planing-tail hulls of varying length, width, and plan-form taper of afterbody

Description: Tests were conducted in Langley Tank no. 2 on models of an unconventional flying-boat hull called a planing-tail hull to determine the effects on resistance of varying a number of afterbody parameters. The effects of varying length, width, and plan-form taper of the afterbody are presented. Tests were made with afterbodies of two widths, two lengths, and two tapers. In the tests the depth of step and the angle of afterbody keel were held constant.(author).
Date: January 7, 1946
Creator: Dawson, John R.; Walter, Robert C. & Hay, Elizabeth S.
Item Type: Refine your search to only Report
open access

Thin Oblique Airfoils at Supersonic Speed

Description: "The well-known methods of thin-airfoil theory have been extended to oblique or sweptback airfoils of finite aspect ratio moving at supersonic speeds. The cases considered thus far are symmetrical airfoils at zero lift having plan forms bounded by straight lines. Because of the conical form of the elementary flow fields, the results are comparable in simplicity to the results of the two-dimensional thin-airfoil theory for subsonic speeds" (p. 267).
Date: May 23, 1946
Creator: Jones, Robert T.
Item Type: Refine your search to only Report
open access

On Reflection of Shock Waves from Boundary Layers

Description: Measurements are presented at Mach numbers from about 1.3 to 1.5 of reflection characteristics and the relative upstream influence of shock waves impinging on a flat surface with both laminar and turbulent boundary layers. The difference between impulse and step waves is discussed and their interaction with the boundary layer is compared. General considerations on the experimental production of shock waves from wedges and cones and examples of reflection of shock waves from supersonic shear lay… more
Date: August 16, 1949
Creator: Liepmann, H. W.; Roshko, A. & Dhawan, S.
Item Type: Refine your search to only Report
open access

On the plane potential flow past a lattice of arbitrary airfoils

Description: The two-dimensional, incompressible potential flow past a lattice of airfoils of arbitrary shape is investigated theoretically. The problem is treated by usual methods of conformal mapping in several stages, one stage corresponding to the mapping of the framework of the arbitrary line lattice and another significant stage corresponding to the Theodorsen method for the mapping of the arbitrary single wing profile into a circle. A particular feature in the theoretical treatment is the special han… more
Date: November 19, 1943
Creator: Garrick, I. E.
Item Type: Refine your search to only Report
open access

Icing-protection requirements for reciprocating-engine induction system

Description: From Summary: "Despite the development of relatively ice-free fuel-metering systems, the widespread use of alternate and heated-air intakes, and the use of alcohol for emergency de-icing, icing of aircraft-engine induction systems is a serious problem. Investigations have been made to study and to combat all phases of this icing problem. From these investigations, criterions for safe operation and for design of new induction systems have been established. The results were obtained from laborato… more
Date: June 20, 1949
Creator: Coles, Willard D.; Rollin, Vern G. & Mulholland, Donald R.
Item Type: Refine your search to only Report
open access

Line-Vortex Theory for Calculation of Supersonic Downwash

Description: "The perturbation field induced by a line vortex in a supersonic stream and the downwash behind a supersonic lifting surface are examined to establish approximate methods for determining the downwash behind supersonic wings. Lifting-lines methods are presented for calculating supersonic downwash. A bent lifting-line method is proposed for computing the downwash field behind swept wings. When applied to triangular wings with subsonic leading edges, this method gives results that, in general, are… more
Date: April 29, 1949
Creator: Mirels, Harold & Haefeli, Rudolph C.
Item Type: Refine your search to only Report
open access

A radar method of calibrating airspeed installations on airplanes in maneuvers at high altitudes and at transonic and supersonic speeds

Description: A method of calibrating the static-pressure source of a pitot static airspeed installation on an airplane in level flight, dives, and other maneuvers at high altitude and at transonic and supersonic speeds is described. The method principally involves the use of radar-phototheodolite tracking equipment. The various sources of error in the method are discussed and sample calibrations are included.
Date: August 31, 1949
Creator: Zalovcik, John A.
Item Type: Refine your search to only Report
open access

The reversibility theorem for thin airfoils in subsonic and supersonic flow

Description: A method introduced by Munk is extended to prove that the light-curve slope of thin wings in either subsonic flow or supersonic flow is the same when the direction of flight of the wing is reversed. It is also shown that the wing reversal does not change the thickness drag, damping-in-roll parameter or the damping-in-pitch parameter.
Date: June 26, 1949
Creator: Brown, Clinton E.
Item Type: Refine your search to only Report
open access

Equilibrium Operating Performance of Axial-Flow Turbojet Engines by Means of Idealized Analysis

Description: "A method of predicting equilibrium operating performance of turbojet engines has been developed, with the assumption of simple model processes for the components. Results of the analysis are plotted in terms of dimensionless parameters comprising critical engine dimensions and over-all operating variables. This investigation was made of an engine in which the ratio of axial inlet-air velocity to compressor-tip velocity is constant, which approximates turbojet engines with axial-flow compressor… more
Date: February 25, 1949
Creator: Sanders, John C. & Chapin, Edward C.
Item Type: Refine your search to only Report
open access

Comparative drag measurements at transonic speeds of rectangular sweptback NACA 65-009 airfoils mounted on a freely falling body

Description: From Summary: "Directly comparable drag measurements have been made of an airfoil with a conventional rectangular plan form and an airfoil with a sweptback plan form mounted on freely falling bodies. Both airfoils had NACA 65-009 sections and were identical in span, frontal area, and chord perpendicular to the leading edge. The sweptback plan form incorporated a sweepback angle of 45 degrees. The data obtained have been used to establish the relation between the airfoil drag coefficients and th… more
Date: August 9, 1945
Creator: Mathews, Charles W. & Thompson, Jim Rogers
Item Type: Refine your search to only Report
open access

Theoretical comparison of several methods of thrust augmentation for turbojet engines

Description: "A theoretical investigation of tail-pipe burning, water injection at the compressor inlet, combination tail-pipe burning plus water injection, bleedoff, and rocket-assist methods thrust augmentation for turbojet engines was made for an engine representative of those in current use. The effect of augmented liquid ratio on augmented thrust ratio and the effects of altitude and flight Mach number on the performance of various methods were determined. The additional take-off weight involved by the… more
Date: October 27, 1948
Creator: Hall, Eldon W. & Wilcox, E. Clinton
Item Type: Refine your search to only Report
open access

Propeller charts for the determination of the rotational speed for the maximum ratio of the propulsive efficiency to the specific fuel consumption

Description: A set of propeller operating efficiency charts, based on a coefficient from which the propeller rotational speed has been eliminated, is presented. These charts were prepared with data obtained from tests of full-size metal propellers in the NACA propeller-research tunnel. Working charts for nine propeller-body combinations are presented, including results from tests of dual-rotating propellers. These charts are to be used in the calculation of the range and the endurance of airplanes equipped … more
Date: December 11, 1940
Creator: Biermann, David & Conway, Robert N.
Item Type: Refine your search to only Report
Back to Top of Screen