UNT Libraries Government Documents Department - 533 Matching Results

Search Results

open access

Analysis of Wind-Tunnel Stability and Control Tests in Terms of Flying Qualities in Full-Scale Airplanes

Description: From Summary: "The analysis of results of wind-tunnel stability and control tests of powered airplane models in terms of the flying qualities of full-scale airplanes is advocated. In order to indicate the topics upon which comments are considered desirable in the report of a wind-tunnel stability and control investigation and to demonstrate the nature of the suggested analysis, the present NACA flying-qualities requirements are discussed in relation to wind-tunnel tests. General procedures for … more
Date: October 1943
Creator: Kayten, Gerald G.
open access

Compressibility and Heating Effects on Pressure Loss and Cooling of a Baffled Cylinder Barrel

Description: Report presenting testing to obtain experimental confirmation of the effect of air compressibility on cooling and pressure loss of a baffled cylinder barrel and to evaluate various methods of analysis. Testing occurred over a wide range of air flows and density altitudes.
Date: July 1944
Creator: Goldstein, Arthur W. & Ellerbrock, Herman H., Jr.
open access

Intercooler cooling-air weight flow and pressure drop for minimum drag loss

Description: Report presenting an analysis of the power losses in airplane flight of cross-flow plate and tubular intercoolers to determine the cooling-air weight flow and pressure drop that give minimum total power loss for any given cooling effectiveness. The investigation covers a range of flight conditions of altitude, airspeed, lift-drag ratio, supercharger-pressure ratio, and adiabatic efficiency.
Date: April 1944
Creator: Reuter, J. George & Valerino, Michael F.
open access

Correlation of exhaust-valve temperatures with engine operating conditions and valve design

Description: Report presenting a theory regarding engine-cooling variables from a previous report, which was used as a basis for the development of a semi-empirical equation to correlate exhaust-valve temperature with engine conditions. Results regarding the determination of constants, influences of operating variables on mean effective gas temperatures, thermal-resistance factor, and accuracy of correlating equation are provided.
Date: October 1945
Creator: Zipkin, M. A. & Sanders, J. C.
open access

The effect of compressibility on two-dimensional tunnel-wall interference for a symmetrical airfoil

Description: Summary: The effective change in the velocity of flow past a wing section, caused by the presence of wind-tunnel walls, is known for potential flow. This theory is extended by investigation of the two-dimensional compressible flow past a thin Rankine Oval. It is shown that for a symmetrical section at zero angle of attack the velocity increment due to the tunnel walls in the incompressible case must be multiplied by the factor 1/1-M^2 to take account of compressibility effects. The Mach numb… more
Date: May 1943
Creator: Nitzberg, Gerald E.
open access

Fluid de-icing tests on a Chandler-Evans 1900 CPB-3 carburetor mounted on a Pratt & Whitney R-1830-C4 intermediate rear engine section

Description: Report presenting an investigation of the icing and de-icing characteristics of a Pratt & Whitney R-1830 engine induction system. The current report covers a program to determine the most effective rate and method of injection of de-icing fluid to remove a heavy ice formation from the induction system. Results regarding the flow rates, recovery times, de-icing portions of the runs, and ice formation characteristics are provided.
Date: October 1944
Creator: Galvin, Herman B. & Essex, Henry A.
open access

Critical combinations of shear and transverse direct stress for an infinitely long flat plate with edges elastically restrained against rotation

Description: Report presenting an exact solution and a closely concurring approximate energy solution for the buckling of an infinitely long flat plate under combined shear and transverse direct stress with edges elastically restrained against rotation. An appreciable fraction of the critical stress in pure shear may be applied to the plate without any reduction in the transverse compressive stress necessary to produce buckling.
Date: January 1945
Creator: Batdorf, S. B. & Houbolt, John C.
open access

An Experimental Investigation of Rectangular Exhaust-Gas Ejectors Applicable for Engine Cooling

Description: Report presenting an experimental investigation of rectangular exhaust-gas ejector pump to provide data that would serve as a guide to the design of ejector applications for aircraft engines with marginal cooling. With a decrease in the quantity of air pumped and an increase in the length of an ejector, the ejector pressure rise increases to optimum values. Results regarding straight ejectors, diffuser ejectors, curved ejectors, ejector aspect ratio, divided ejectors, multistage ejectors, and n… more
Date: May 1945
Creator: Manganiello, Eugene J. & Bogatsky, Donald
open access

An Investigation of a Thermal Ice-Prevention System for a C-46 Cargo Airplane 5: Effect of Thermal System on Airplane Cruise Performance

Description: Report presenting flight tests conducted to evaluate the effect of a thermal ice prevention system on the aerodynamic performance of a C-46 cargo airplane. The installation of the thermal ice-prevention system was found to reduce the indicated airspeed by about 6 miles per hour. Results regarding the overall performance change resulting from the installation of the thermal system, reduction of power attributed to heat-exchanger exhaust-gas back pressure, reduction of power attributed to the int… more
Date: May 1945
Creator: Selna, James
open access

An Investigation of a Thermal Ice-Prevention System for a C-46 Cargo Airplane 3: Description of Thermal Ice-Prevention Equipment for Wings, Empennage, and Windshield

Description: Report presenting an investigation of a thermal ice-prevention system for a Curtiss-Wright C-46 airplane, including the equipment for the wings, empennage, and windshield. The report is the third in a series and focuses on the revisions to the components for thermal ice prevention, the temperature- and pressure-measurement equipment installed in the airplane to determine the performance of the system, and the results of static-load structural tests of a specimen of the wing outer-panel leading … more
Date: February 1945
Creator: Jones, Alun R. & Spies, Ray J., Jr.
open access

An Investigation of a Thermal Ice-Prevention System for a C-46 Cargo Airplane 4: Results of Flight Tests in Dry-Air and Natural-Icing Conditions

Description: Report presenting an investigation of a thermal ice-prevention system for a C-46 cargo airplane, which involved flight tests in dry-air and natural-icing conditions at two different laboratories. The purpose of the investigation was to determine the effectiveness of the C-46 airplane ice-prevention system and to continue the develop of thermal ice-prevention equipment. Results regarding the wing outer panel, wing tips, wing center panel, horizontal stabilizers, vertical fin, windshields, ice-re… more
Date: February 1945
Creator: Selna, James; Neel, Carr B., Jr. & Zeiller, E. Lewis
open access

Flight Studies of the Horizontal-Tail Loads Experienced by a Fighter Airplane in Abrupt Maneuvers

Description: Report presenting flight measurements made on a modern pursuit airplane to determine the approximate magnitude of the horizontal tail loads in accelerated flight. Pressures at a few points were used as an index of the tail loads by correlating these pressures with complete pressure-distribution data obtained in the NACA full-scale tunnel.
Date: June 1944
Creator: Flight Research Maneuvers Section
open access

A general representation for axial-flow fans and turbines

Description: From Summary: "A general representation of fan and turbine arrangements on a single classification chart is presented which is made possible by a particular definition of the stage of an axial-flow fan or turbine. Several unconventional fan and turbine arrangements are indicated and the applications of these arrangements are discussed."
Date: June 1945
Creator: Perl, W. & Tucker, M.
open access

An Investigation of a Thermal Ice-Prevention System for a C-46 Cargo Airplane 6: Dry-Air Performance of Thermal System at Several Twin- and Single-Engine Operating Conditions at Various Altitudes

Description: Report presenting flight tests to establish the dry-air-performance characteristics of a thermal ice-prevention system at various operating conditions and altitudes. Results regarding twin-engine tests and single-engine tests of characteristics such as skin temperatures and location of heating are provided.
Date: May 1945
Creator: Selna, James & Kees, Harold L.
open access

Compressible potential flow with circulation about a circular cylinder

Description: Report presenting the potential function for flow, with circulation, of a compressible fluid about a circular cylinder, which is obtained in series form including terms of the order of M(exp 4) where M is the Mach number of the free stream. The equations are used to obtain pressure coefficient as a function of Mach number at a point on the surface of the cylinder for different values of circulation.
Date: January 1944
Creator: Heaslet, Max A.
open access

An Investigation of a Thermal Ice-Prevention System for a C-46 Cargo Airplane 2: The Design, Construction, and Preliminary Tests of the Exhaust-Air Heat Exchanger

Description: Report presenting an investigation of an exhaust-air heat exchanger, which has been designed, constructed, and flight-tested for a C-46 cargo airplane. The primary purpose of the investigation was to provide the C-46 airplane with a satisfactory source of heated air and to continue the development of the heat exchanger as a part of thermal ice-prevention equipment. Results indicated that the required thermal output and desired air-temperature rise have been achieved and that the exchanger is su… more
Date: February 1945
Creator: Jackson, Richard
open access

Application of Spring Tabs to Elevator Controls

Description: Report presenting equations for calculating the stick-force characteristics obtained with a spring-tab type of elevator control. The main problems encountered in the design of the satisfactory elevator spring tab are to provide stick forces in the desired range, to maintain the force per g sufficiently constant throughout the speed range, to avoid undesirable "feel" of the control in ground handling, and to prevent flutter.
Date: October 1944
Creator: Phillips, William H.
open access

Wind-Tunnel Procedure for Determination of Critical Stability and Control Characteristics of Airplanes

Description: "This report outlines the flight conditions that are usually critical in determining the design of components of an airplane which affect its stability and control characteristics. The wind-tunnel tests necessary to determine the pertinent data for these conditions are indicated, and the methods of computation used to translate these data into characteristics which define the flying qualities of the airplane are illustrated" (p. 1).
Date: April 1944
Creator: Goett, Harry J.; Jackson, Roy P. & Belsley, Steven E.
open access

Calculations of Economy of 18-Cylinder Radial Aircraft Engine With Exhaust-Gas Turbine Geared to the Crankshaft at Cruising Speed

Description: Report presenting calculations based on dynamometer test-stand data on an 18-cylinder radial engine made to determine the improvement in fuel consumption that can be obtained by gearing an exhaust-gas turbine to the engine crankshaft in order to increase the engine shaft work.
Date: December 1945
Creator: Hannum, Richard W.
Back to Top of Screen