UNT Libraries Government Documents Department - 38 Matching Results

Search Results

Results: 1 - 24 next
open access

An Ultrasonic Measurement System for The Precise Determination of the Elastic Moduli of Single Crystals

Description: From Abstract: "The equipment described in this paper is based on the technique developed by McSkimin. Figure 1 shows a block diagram of the system. The oscilloscope presentation with no specimen present appears as shown in Figure 2a. At discrete frequencies, the pattern appears as shown in Figure 2b."
Date: May 1961
Creator: Renken, C. J.
Item Type: Refine your search to only Report
open access

Irradiation of an Aluminum Alloy-Clad Ceramic Pellet-Fueled Plate

Description: From Introduction: "An experiment, designated MTR-W10, was designed to determine the effects of high burnup on the cladding and fuel of an aluminum-1% nickel alloy (M-388)-clad ceramic pellet-fuelded plate if the type manufactured at Argonne for the BORAX-IV core. Conditions of irradiation were selected to allow local boiling at the high flux end of the plate at a pressure of 600 psig."
Date: May 1960
Creator: Gavin, A. P.
Item Type: Refine your search to only Report
open access

Interim Report: Faret Experimental Program

Description: From Introduction: "The Fast Reactor Test (FARET) program is part of the United States Fast Reactor Program directed toward the demonstration of breeder reactors essential to the long-range goal of utilizing fertile fuels. (1) With-in this program is the current thinking that the early construction and operation of two or three prototype nuclear power plants of the order of 250 Mw(e) will lead eventually to the construction of practical and economic full scale breeder reactors by the early 1980… more
Date: April 1963
Creator: Smaardyk, A.; Bump, T. R.; Handwerk, J. & Handwerk, J.
Item Type: Refine your search to only Report
open access

Transient Behavior of a Natural-Circulation Loop Operating Near The Thermodynamic Critical Point

Description: From Introduction: "Interest in utilizing natural-circulation loops to obtain results that aid in the design of some boiler and nuclear reactor coolant systems has focused attention on the dynamic behavior of such loops. Much analytical and experimental work has been done so as to permit predictions of the transient behavior of both single-phase and two-phase neutral-circulation systems. The analytical portion of the study consisted of simulating the loop by utilizing a digital computer to pred… more
Date: May 1963
Creator: Harden, Darrel G.
Item Type: Refine your search to only Report
open access

On The Steady-State Thermal Stresses in Cylindrical Fuel Pins Due to Axial Variations in Their Internal Heat-Generation Rate

Description: From Introduction: "Specifically, we shall be concerned with the case of a solid right circular cylinder of infinite axial extent, having a stress-free outer boundary, being cooled by a temperature-independent boundary conductance, and having an axial heat-generation rate of form shown in Fig. 1. The inclusion of a radial dependence proportional to I^0(r/L) is only a minor complication in solving the required heat-transfer problem and, for reference, has been included in the solution for the te… more
Date: December 1966
Creator: Valentin, Richard A.
Item Type: Refine your search to only Report
open access

Two-Phase Heat Transfer With Gas Injection Through A Porous Boundary Surface

Description: From Introduction: "The purpose of this study is to investigate some of the hydrodyamic aspects of two-phase heat transfer in the lower quality range. The results of this study should contribute to a better and more thorough understanding of the processes and mechanisms affecting two-phase heat transfer, and in this way help in improving its prediction."
Date: March 1964
Creator: Kudirka, A. A.
Item Type: Refine your search to only Report
open access

Pictorial Studies of Molecules 1: Molecular Orbital Density Comparisons of H2, Li2, B2, C2, N2, O2, and F2

Description: From Review of Theory: " In practice, a very close approximation to the molecular orbitals can be obtained in this way. Recent calculations of this type, utilizing analysis and computer programs developed by the author, have resulted in the determination of the molecular orbitals for a large number of diatomic molecules in the form of Eq. (2). These functions, which are thought to be very close to the Hartree-Fock (i.e., the molecular orbitals demanded by theory) result, were used in the pictor… more
Date: July 1965
Creator: Wahl, Arnold C.
Item Type: Refine your search to only Report
open access

XLIBIT: ANL Cross-section Library Code

Description: From Introduction: "With the acquisition by the Laboratory of a Control Data 3600 computer in the fall of 1963, a joint reprogramming project was undertaken by the Laboratory's Applied Mathematics Division and the Control Data Corporation to develop one - and two-dimensional diffusion-theory and Sn transport-theory programs for the CDC-3600. The XLIBIT code described in this report was developed as a part of this project. XLIBIT is a CDC-3600 program designed to: 1) Prepare a cross-section libr… more
Date: February 1966
Creator: Sparck, S. D.
Item Type: Refine your search to only Report
open access

Engineering Development of Fluid-Bed Fluoride Volatility Processes: Part 5. Description of a Pilot-Scale Facility for Uranium Dioxide-Plutonium Dioxide Processing Studies

Description: Report describing a pilot plant constructed at Argonne National Laboratory for studying two major process steps for the recovery of uranium and plutonium from spent nuclear fuels of power reactors. A major objective is the demonstration of optimum process conditions for the two steps for synthetic reactor fuel compositions, including those containing mixtures of inactive fission products.
Date: 1964
Creator: Vogel, G. J.; Carls, E. L. & Mecham, W. J.
Item Type: Refine your search to only Report
open access

Condensation of Metal Vapors: Mercury and the Kinetic Theory of Condensation

Description: Report issued by the Argonne National Laboratory discussing condensation theories of metal vapors. As stated in the introduction, "the objectives of this research then are critical analysis of condensation theories and data for metal vapors and experimental evaluation of the resistance to condensation for a representative metal such as mercury" (p. 18). This report includes tables, illustrations, and photographs.
Date: October 1964
Creator: Wilhelm, Donald J.
Item Type: Refine your search to only Report
open access

Liquid MHD Power Cycle Studies

Description: Report issued by the Argonne National Laboratory discussing the magnetohydrodynamics (MHD) power cycle for liquid metals. The benefits, and different phases of the MHD power cycle are presented. This report includes tables, and illustrations.
Date: June 1965
Creator: Petrick, Michael & Lee, Kung-You
Item Type: Refine your search to only Report
open access

A Report on Some Attempts to Cast Centrifugally Fuel Elements of Small Diameter

Description: Report issued by the Argonne national Laboratory discussing centrifugal casting of thin uranium plates. The applicability of the centrifugal casting technique to the production of multiple castings of fuel pins of small diameter and of thin fuel plates was investigated. This report includes tables, illustrations, and photographs.
Date: March 1961
Creator: Yaggee, F. L.
Item Type: Refine your search to only Report
open access

Cost Study of a 100-Mw(e) Direct-Cycle Boiling Water Reactor Plant

Description: Report issued by the Argonne national Laboratory discussing a technical and economic evaluation of a direct-cycle light-water boiling reactor designed for natural circulation and internal steam-water separation. The reference 100-Mw(e) reactor power plant design evolved from the study should have the best chance (compared to similar plants) of approaching the 8 to 9 mill/kwh total power-cost level. This report includes tables, and illustrations.
Date: July 1960
Creator: Bullinger, C. F. & Harrer, J. M.
Item Type: Refine your search to only Report
open access

Irradiation of an Aluminum Alloy-Clad, Aluminum-Uranium Alloy-Fueled Plate

Description: Report issued by the Argonne National Laboratory discussing irradiation tests of an aluminum alloy-clad, aluminum-uranium alloy fuel plate. As stated in the introduction, "calculations were made to determine the lowest possible pressure which would allow the maximum possible local boiling on the plate and still assure a margin of safety against burnout" (p. 9). This report includes tables, illustrations, and photographs.
Date: July 1960
Creator: Gavin, A. P. & Crothers, C. C.
Item Type: Refine your search to only Report
open access

Performance Characteristics of a Liquid Metal MHD Generator

Description: Report issued by the Argonne National Laboratory discussing the performance of magnetohydrodynamic generators. As stated in the abstract, "an experimental study was made of the performance characteristics of a liquid metal MHD generator utilizing single-phase sodium-potassium and two-phase sodium-potassium-nitrogen fluids. The purpose of this study was to compare the generator performance with theory for single-phase flow and to determine the effects of the introduction of the gaseous phase on … more
Date: July 1964
Creator: Petrick, Michael & Lee, Kung-You
Item Type: Refine your search to only Report
open access

A Generalized Computer Program for Flowsheet Calculation and Process Data Reduction

Description: Report issued by the Argonne National Laboratory discussing the PACER-65 computer program. As stated in the summary, the program "has been developed and utilized for flow sheet calculations and process-data reduction. PACER-65 is an executive program in which material- and energy-balance equations, conversion factors, etc., for each processing step are described by separate subroutines" (p. 5). This report includes tables, and illustrations.
Date: April 1966
Creator: Koppel, L. B.; Alfredson, P. G.; Anastasia, L. J.; Knudsen, I. E. & Vogel, G. J.
Item Type: Refine your search to only Report
open access

A Hybrid-Computer Program for Transient Temperature Calculations on TREAT Fast Reactor Safety Experiments

Description: Report issued by the Argonne National Laboratory discussing a computer program used for fast reactor safety experiments. As stated in the summary, "this report gives a detailed description of a hybrid-computer program for calculating temperatures in a multi-region, axisymmetric, cylindrical configuration consisting of solid materials bounded by flowing coolant. Included is an explanation of the mathematical methods, together with a discussion of special features, input-output descriptions, and … more
Date: September 1967
Creator: Bryant, Lawrence T.; Amiot, Lawrence W.; Dickerman, Charles E. & Stephany, William P.
Item Type: Refine your search to only Report
open access

Design and Testing of a High-Heat Flux Electron-Bombardment Heater

Description: Report issued by the Argonne National Laboratory discussing the testing of an electron-bombardment heater. As stated in the abstract, "the applications of electron-bombardment heating to liquid-metal heat transfer and reactor safety experiments are discussed. The design of a high-heat-flux, electron-bombardment heater (EBH) is presented" (p. 7). This report includes tables, illustrations, and photographs.
Date: March 1968
Creator: Carlson, R. D. & Holtz, R. E.
Item Type: Refine your search to only Report
Back to Top of Screen