You limited your search to:

  Partner: UNT Libraries Government Documents Department
 Decade: 1950-1959
 Collection: Technical Report Archive and Image Library
4-Channel Line Driver: Modified

4-Channel Line Driver: Modified

Date: 1950?
Creator: Titterton, E. W.
Description: Technical drawing of line drivers and amplifiers for use in nuclear reactors.
Contributing Partner: UNT Libraries Government Documents Department
An 8-foot axisymmetrical fixed nozzle for subsonic Mach numbers up to 0.99 and for a supersonic Mach number of 1.2

An 8-foot axisymmetrical fixed nozzle for subsonic Mach numbers up to 0.99 and for a supersonic Mach number of 1.2

Date: February 23, 1950
Creator: Ritchie, Virgil S; Wright, Ray H & Tulin, Marshall P
Description: None
Contributing Partner: UNT Libraries Government Documents Department
10 MWe Sodium Deuterium Reactor Design Report

10 MWe Sodium Deuterium Reactor Design Report

Date: 1959
Creator: Davis, Peter J.
Description: From foreword: This report describes the goal of the overall SDR program to demonstrate the commercial generation of electrical power using a sodium-cooled reactor.
Contributing Partner: UNT Libraries Government Documents Department
11,400 KW Nuclear Power Plant Employing an Organic Moderated Reactor: Preliminary Description

11,400 KW Nuclear Power Plant Employing an Organic Moderated Reactor: Preliminary Description

Date: 1957
Creator: Wheelock, C. W.
Description: Abstract: The preliminary design is described for a small electric-power-generating plant powered by an organic moderated reactor. System and component requirements are discussed and possible design configurations and equipment are described.
Contributing Partner: UNT Libraries Government Documents Department
15 MW Gas-Cooled Closed-Cycle Reactor Power System Study: Final Report, Volumes 1-2

15 MW Gas-Cooled Closed-Cycle Reactor Power System Study: Final Report, Volumes 1-2

Date: April 1, 1957
Creator: unknown
Description: This report covers a feasibility study for a 15 megawatt gas cooled reactor power system, conducted by the Ford Instrument Company Division of the Sperry Rand Corporation during the months of March to August 1956.
Contributing Partner: UNT Libraries Government Documents Department
20,000 KW Nuclear Power Plant Study for United States Atomic Energy Commission

20,000 KW Nuclear Power Plant Study for United States Atomic Energy Commission

Date: July 7, 1957
Creator: Gilbert Associates, Inc.
Description: Introduction: In September of 156, Gilbert Associates, Inc., entered into a contract with the United States of America, acting through the United States Atomic Energy Commission, for the study and preliminary design of a nuclear power plant being considered for integration into a central station power system at an overseas site.
Contributing Partner: UNT Libraries Government Documents Department
30 Rv. Power Supply

30 Rv. Power Supply

Date: 1950?
Creator: U.S. Atomic Energy Commission
Description: Technical drawing of electronic circuits and power supplies to nuclear reactors.
Contributing Partner: UNT Libraries Government Documents Department
1024 Channel Time-of-Flight Analyzer for MTR Fast Chopper - Operating Manual

1024 Channel Time-of-Flight Analyzer for MTR Fast Chopper - Operating Manual

Date: March 11, 1959
Creator: Petree, F. L.
Description: Report on the principle of measuring the time-of-flight of neutrons, magnetic-core storage of detector pulses, how pulses are stored, current generator, storage cycle generator, and cathode ray oscillograph.
Contributing Partner: UNT Libraries Government Documents Department
Ability of pilots to control simulated short-period yawing oscillations

Ability of pilots to control simulated short-period yawing oscillations

Date: November 13, 1950
Creator: Phillips, William H & Cheatham, Donald C
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Abnormal grain growth in M-252 and S-816 alloys

Abnormal grain growth in M-252 and S-816 alloys

Date: November 1957
Creator: Decker, R F; Rush, A I; Dano, A G & Freeman, J W
Description: An experimental investigation was carried out on air- and vacuum-melted M-252 and S-816 alloys to find conditions of heating and hot-working which resulted in abnormal grain growth. The experiments were mainly limited to normal conditions of heating for hot-working and heat treatment and normal temperatures of solution treatment were used to allow grain growth after susceptibility to abnormal grain growth was developed by various experimental conditions. Results indicated that small reductions of essentially strain-free metal were the basic cause of such grain growth.
Contributing Partner: UNT Libraries Government Documents Department
Abnormal grain growth in nickel-base heat-resistant alloys

Abnormal grain growth in nickel-base heat-resistant alloys

Date: December 1957
Creator: Decker, R F; Rush, A I; Dano, A G & Freeman, A G
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Abnormal grain growth in S-816 alloy

Abnormal grain growth in S-816 alloy

Date: April 1952
Creator: Rush, A I; Freeman, J W & White, A E
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Acceleration characteristics of a turbojet engine with variable-position inlet guide vanes

Acceleration characteristics of a turbojet engine with variable-position inlet guide vanes

Date: July 7, 1955
Creator: Dobson, W F & Wallner, Lewis E
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Acceleration of high-pressure-ratio single-spool turbojet engine as determined from component performance characteristics : effect of compressor interstage air bleed

Acceleration of high-pressure-ratio single-spool turbojet engine as determined from component performance characteristics : effect of compressor interstage air bleed

Date: July 3, 1953
Creator: Rebeske, John J , Jr & Dugan, James F , Jr
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Acceleration of high-pressure-ratio single-spool turbojet engine as determined from component performance characteristics I : effect of air bleed at compressor outlet

Acceleration of high-pressure-ratio single-spool turbojet engine as determined from component performance characteristics I : effect of air bleed at compressor outlet

Date: March 10, 1953
Creator: Rebeske, John J , Jr & Rohlik, Harold E
Description: An analytical investigation was made to determine from component performance characteristics the effect of air bleed at the compressor outlet on the acceleration characteristics of a typical high-pressure-ratio single-spool turbojet engine. Consideration of several operating lines on the compressor performance map with two turbine-inlet temperatures showed that for a minimum acceleration time the turbine-inlet temperature should be the maximum allowable, and the operating line on the compressor map should be as close to the surge region as possible throughout the speed range. Operation along such a line would require a continuously varying bleed area. A relatively simple two-step area bleed gives only a small increase in acceleration time over a corresponding variable-area bleed. For the modes of operation considered, over 84 percent of the total acceleration time was required to accelerate through the low-speed range ; therefore, better low-speed compressor performance (higher pressure ratios and efficiencies) would give a significant reduction in acceleration time.
Contributing Partner: UNT Libraries Government Documents Department
Acceleration of high-pressure-ratio single-spool turbojet engine as determined from component performance characteristics III : effect of turbine stator adjustment

Acceleration of high-pressure-ratio single-spool turbojet engine as determined from component performance characteristics III : effect of turbine stator adjustment

Date: August 2, 1954
Creator: Rohlik, Harold E & Rebeske, John J
Description: None
Contributing Partner: UNT Libraries Government Documents Department
An acceleration schedule control for accelerating a turbojet engine and its use with a speed control

An acceleration schedule control for accelerating a turbojet engine and its use with a speed control

Date: May 12, 1958
Creator: Gerus, Theodore F; Powers, Albert G & Heppler, Herbert J
Description: None
Contributing Partner: UNT Libraries Government Documents Department
An acceleration schedule control for accelerating a turbojet engine and its use with a speed control

An acceleration schedule control for accelerating a turbojet engine and its use with a speed control

Date: May 12, 1958
Creator: Gerus, T. F.; Heppler, H. J. & Powers, A. G.
Description: Accelerating-limiting controls for turbojet engines.
Contributing Partner: UNT Libraries Government Documents Department
Accelerations and passenger harness loads measured in full-scale light-airplane crashes

Accelerations and passenger harness loads measured in full-scale light-airplane crashes

Date: August 1953
Creator: Eiband, A Martin; Simpkinson, Scott H & Black, Dugald O
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Accelerations in fighter-airplane crashes

Accelerations in fighter-airplane crashes

Date: November 4, 1957
Creator: Acker, Loren W; Black, Duglad O & Moser, Jacob C
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Accelerations in transport-airplane crashes

Accelerations in transport-airplane crashes

Date: February 1958
Creator: Preston, G Merritt & Pesman, Gerard J
Description: None
Contributing Partner: UNT Libraries Government Documents Department
Accepted Limit Values of Air Pollutants

Accepted Limit Values of Air Pollutants

Date: May 1954
Creator: Barkley, J. F.
Description: Report issued by the U.S. Bureau of Mines discussing, as stated in the introduction, the "accepted maximum permissible concentrations of air pollutants from the standpoints of health, damage to vegetation, damage to property, and requirements of industrial processes" (p. 1). This report includes tables.
Contributing Partner: UNT Libraries Government Documents Department
Accidental Radiation Excursion at the Y-12 Plant, June 16, 1958: Final Report

Accidental Radiation Excursion at the Y-12 Plant, June 16, 1958: Final Report

Date: September 12, 1958
Creator: Patton, F. S.; Bailey, J. C.; Callihan, A. D.; Googin, J. M.; Jasny, G. R.; McAlduff, H. J. et al.
Description: This report describes the circumstances leading to the accident, attempts to reconstruct the nuclear reactivity conditions, and reviews the dosimetric means and results which were used to help determine the exposure of affected employees.
Contributing Partner: UNT Libraries Government Documents Department
Accidents from explosives at metal and nonmetallic mines

Accidents from explosives at metal and nonmetallic mines

Date: 1957
Creator: Cash, Frank E.
Description: Circular produced by the U.S. Bureau of Mines to promote safety through a series of reports on accident prevention in mines. According the the scope statement, "This is the fourth section of the revised series of circulars that cover various phases of accident prevention in metal and nonmetallic mines; it give information on accidents and injuries from storing, handling, and using explosive in metal and nonmetallic mines and discusses the precautions by which they can be prevented" (p. 2).
Contributing Partner: UNT Libraries Government Documents Department
FIRST PREV 1 2 3 4 5 NEXT LAST