UNT Libraries Government Documents Department - 923 Matching Results

Search Results

prev Results: 11 - 34 next
open access

Aerodynamic characteristics at high speeds of related full-scale propellers having different blade-section cambers

Description: From Summary: "Wind-tunnel tests of a full-scale two-blade NACA 10-(10)(08)-03 (high camber) propeller have been made for a range of blade angles from 20 degrees to 55 degrees at airspeeds up to 500 miles per hour. The results of these tests have been compared with results from previous tests of the NACA 10-(3) (08)-03 (low camber) and NACA 10-(5)(08)-03 (medium camber) propellers to evaluate the effects of blade-section camber on propeller aerodynamic characteristics."
Date: May 6, 1948
Creator: Maynard, Julian D. & Salters, Leland B., Jr.
Item Type: Refine your search to only Report
open access

Aerodynamic characteristics at subsonic and supersonic Mach numbers of a thin triangular wing of aspect ratio 2 1: maximum thickness at 20 percent of the chord

Description: From Summary: "This report presents the results of a wind-tunnel investigation conducted to determine the effects of Mach number on the aerodynamic characteristics of a wing of triangular plan form."
Date: November 19, 1948
Creator: Berggren, Robert E. & Summers, James L.
Item Type: Refine your search to only Report
open access

Aerodynamic characteristics at subsonic and supersonic Mach numbers of a thin triangular wing of aspect ratio 2 2: maximum thickness at midchord

Description: "The lift, drag, and pitching-moment characteristics of a triangular wing, having an aspect ratio of 2 and a symmetrical double-wedge profile of 5-percent-chord maximum thickness at midchord, have been evaluated from wind-tunnel tests at Mach numbers from 0.50 to 0.975 and from 1.09 to 1.49 and at Reynolds numbers ranging from 0.67 to 0.85 million. The lift, drag, and pitching-moment coefficients of the triangular wing with a leading-edge sweepback of approximately 63 degrees did not exhibit th… more
Date: December 3, 1948
Creator: Walker, Harold J. & Berggren, Robert E.
Item Type: Refine your search to only Report
open access

Aerodynamic Characteristics of Several NACA Airfoil Sections at Seven Reynolds Numbers From 0.7 X 10(Exp 6) to 9.0 X 10(Exp 6)

Description: Report presenting an investigation of the two-dimensional aerodynamic characteristics of several NACA airfoil sections at four Reynolds numbers. Results regarding the minimum drag, maximum lift, lift-curve slope, and angle of zero lift and pitching moment are provided.
Date: May 27, 1948
Creator: Loftin, Laurence K., Jr. & Poteat, M. Irene
Item Type: Refine your search to only Report
open access

Aerodynamic Characteristics of Two All-Movable Wings Tested in the Presence of a Fuselage at a Mach Number of 1.9

Description: Report presenting testing of half-span models of two wings of different plan form as both all-movable and fixed surfaces in the presence of a half fuselage. All-movable surfaces are being considered for supersonic aircraft as possible angle-of-attack indicators, control surfaces, and all-movable wings. Results regarding the lift characteristics, center of pressure, and drag of the wings are provided.
Date: October 28, 1948
Creator: Conner, D. William
Item Type: Refine your search to only Report
open access

Aerodynamic Properties of Slender Wing-Body Combinations at Subsonic, Transonic, and Supersonic Speeds

Description: From Introduction: "In an incomprehensible medium, the mutual interference of a fuselage and wing of high-aspect ratio (to which lifting-line theory is applicable) has been treated by Lennertz, Wiselsberger, Pepper, and Multhopp in reference 1, 2, 3, and 4. It is the purpose of this note to treat the effect of on the aerodynamic loading of the mutual interference between a low-aspect-ratio pointed wing and a fuselage consisting of a slender body of revolution."
Date: July 1948
Creator: Spreiter, John R.
Item Type: Refine your search to only Report
open access

Aerodynamic study of a wing-fuselage combination employing a wing swept back 63 degrees: Subsonic Mach and Reynolds number effects on the characteristics of the wing and on the effectiveness of an elevon

Description: Report presenting a wind-tunnel investigation of a semispan model of a wing swept back 63 degrees with an aspect ratio of 3.5 and a taper ratio of 0.25. The tests were conducted to evaluate the effects of Reynolds and Mach number on the aerodynamic characteristics of the wing. Results regarding the characteristics of the wing with the elevon undeflected, effectiveness of the elevon, effects of roughness strips, and effect of model deflection under varying loads are provided.
Date: October 11, 1948
Creator: Reynolds, Robert M. & Smith, Donald W.
Item Type: Refine your search to only Report
open access

Aerodynamics characteristics of 24 NACA 16-series airfoils at Mach numbers between 0.3 and 0.8

Description: Report presenting an investigation to determine the aerodynamic characteristics of a group of NACA 16-series airfoils related in camber and thickness over a range of Mach numbers. All of the currently available force-test data for NACA 16-series airfoils obtained under the same test conditions in the 24-inch high-speed tunnel are presented.
Date: September 1948
Creator: Lindsey, W. F.; Stevenson, D. B. & Daley, Bernard N.
Item Type: Refine your search to only Report
open access

Aeronautical Characteristics of a Three-Blade Propeller Having NACA 10-(3)(08)-03 Blades

Description: "Data obtained in tests of a 10-foot diameter, three-blade propeller, having NACA 10-(3)(08)-03 blades, conducted in the Langley 16-foot high-speed tunnel are presented. The propeller performance quantities related by the tests are thrust, torque, efficiency, and advance ratio for various rotational speeds or stream Mach numbers with blade angle as a parameter. Advance Mach numbers varied from 0.12 to 0.64" (p. 1).
Date: October 29, 1948
Creator: Davidson, Robert E.
Item Type: Refine your search to only Report
open access

Altitude-Test-Chamber Investigation of a Solar Afterburner on the 24C Engine 1 - Operational Characteristics and Altitude Limits

Description: "An altitude-test-chamber investigation was conducted to determine the operational characteristics and altitude blow-out limits of a Solar afterburner in a 24C engine. At rated engine speed and maximum permissible turbine-discharge temperature, the altitude limit as determined by combustion blow-out occurred as a band of unstable operation of about 8000 feet altitude in width with maximum altitude limits from 32,000 feet at a Mach number of 0.3 to about 42,000 feet at a Mach number of 1.0. The … more
Date: July 6, 1948
Creator: Dowman, Harry W. & Reller, John O.
Item Type: Refine your search to only Report
open access

Altitude-Wind-Tunnel Investigation of a 3000-Pound-Thrust Axial-Flow Turbojet Engine 1 - Analysis of Turbine Performance

Description: A wind tunnel investigation was conducted to determine the performance of a turbine operating as an integral part of a turbojet engine. Data was obtained while the engine was running over full operable range of speeds at various altitudes and flight mach numbers, and with four nozzles of different outlet areas.A maximum turbine efficiency of 0.875 was obtained at altitude of 15 thousand feet, Mach number 0.53, and corrected turbine speed of 5900 rpm.
Date: August 23, 1948
Creator: Conrad, Earl W.; Dietz, Robert O., Jr. & Golladay, Richard L.
Item Type: Refine your search to only Report
open access

Altitude-Wind-Tunnel Investigation of a 3000-Pound-Thrust Axial-Flow Turbojet Engine 2 - Analysis of Compressor Performance

Description: Compressor performance properties for two 11-stage compressors of 3000-pound-thrust axial-flow turbojet engines were determined. Data are presented for a range of simulated altitudes and a range of Mach numbers for various modifications of the engine.
Date: August 23, 1948
Creator: Dietz, Robert O., Jr.; Berdysz, Joseph J. & Howard, Ephraim M.
Item Type: Refine your search to only Report
open access

Altitude-Wind-Tunnel Investigation of a 3000-Pound-Thrust Axial-Flow Turbojet Engine 3 - Analysis of Combustion-Chamber Performance

Description: Combustion chamber performance properties of a 3000-pound-thrust axial-flow turbojet engine were determined. Data are presented for a range of simulated altitudes from 15,000 to 45,0000 feet and a range of Mach numbers from 0.23 to 1.05 for various modifications of the engine.
Date: August 23, 1948
Creator: Campbell, Carl E.
Item Type: Refine your search to only Report
open access

Altitude-Wind-Tunnel Investigation of a 3000-Pound-Thrust Axial-Flow Turbojet Engine, 4, Operational Characteristics

Description: An investigation was conducted to evaluate the operational characteristics of a 3000 pound thrust axial flow turbojet engine over a range of simulated altitudes from 2000 to 50,000 feet and simulated flight Mach numbers from 0 to 1.04 throughout the operable range of engine speeds. Engine operating range, acceleration, deceleration, starting, altitude, and flight Mach number compensation of the fuel control system, and operation of the lubrication system at high and low ambient air temperatures… more
Date: August 23, 1948
Creator: Hawkins, W. Kent & Meyer, Carl L.
Item Type: Refine your search to only Report
open access

Altitude-Wind-Tunnel Investigation of a 3000-Pound-Thrust Axial-Flow Turbojet Engine 6 - Analysis of Effects of Inlet Pressure Losses

Description: The losses in the inlet air ducts, the diffusers, and the de-icing equipment associated with turbojet engine installations cause a reduction in the total pressure at the inlet of the engine and result in reduced thrust and increased specific fuel consumption. An analytical evaluation of the effects of inlet losses on the net thrust and the fuel economy of a 3000-pound-thrust axial flow turbojet engine with a two-stage turbine is presented. The analysis is based on engine performance characteris… more
Date: 1948
Creator: Sanders, Newell D. & Palasics, John
Item Type: Refine your search to only Report
open access

Altitude-Wind-Tunnel Investigation of a 3000-Pound-Thrust Axial-Flow Turbojet Engine, 7, Pressure and Temperature Distributions

Description: Temperature and pressure distributions for an original and modified 3000 pound thrust axial flow turbojet engine were investigated. Data are included for a range of simulated altitudes from 5000 to 45000 feet, Mach numbers from 0.24 to 1.08, and corrected engine speeds from 10,550 to 13,359 rpm.
Date: December 10, 1948
Creator: Saari, Martin J. & Prince, William R.
Item Type: Refine your search to only Report
open access

Altitude-Wind-Tunnel Investigation of a 3000-Pound-Thrust Axial-Flow Turbojet Engine, Part 5, Performance and Windmilling Drag Characteristics

Description: "An investigation has been conducted in the NACA Cleveland altitude wind tunnel to evaluate the performance and windmilling drag characteristics of an original and a modified turbojet engine of the same type. Data have been obtained at simulated altitudes from 5000 to 45,000 feet, simulated flight Mach numbers from 0.09 to 1.08, and engine speeds from 4000 to 12,500 rpm. Engine performance data are presented for both engines to show the effects of altitude at a flight Mach number of 0.25 and of… more
Date: August 23, 1948
Creator: Meyer, Carl L. & Bloomer, Harry E.
Item Type: Refine your search to only Report
open access

Altitude-Wind-Tunnel Investigation of a 4000-Pound-Thrust Axial-Flow Turbojet Engine. 2 - Operational Characteristics

Description: From Summary: "An investigation was conducted in the Cleveland altitude wind tunnel to determine the operational characteristics of an axial flow-type turbojet engine with a 4000-pound-thrust rating over a range of pressure altitudes from 5,000 to 50,000 feet, ram pressure ratios from 1.00 to 1.86, and temperatures from 60 deg to -50 deg F. The low-flow (standard) compressor with which the engine was originally equipped was replaced by a high-flow compressor for part of the investigation. The e… more
Date: August 6, 1948
Creator: Fleming, William A.
Item Type: Refine your search to only Report
open access

Altitude-Wind-Tunnel Investigation of a 4000-Pound-Thrust Axial-Flow Turbojet Engine, 3, Performance Characteristics with the High-Flow Compressor

Description: A wind tunnel investigation was conducted to determine the performance of a 4000-pound-thrust axial-flow turbojet engine with a high flow compressor. Pressure altitudes included 5000 to 40000 feet with ram pressure ratios from 1.00 to 1.82. Altitudes included 20000 to 40000 feet and ram pressure ratios from 1.09 to 1.75. A comparison is made between engine performance with high flow and low flow compressors.
Date: August 5, 1948
Creator: Fleming, William A. & Golladay, Richard L.
Item Type: Refine your search to only Report
Back to Top of Screen