UNT Libraries Government Documents Department - 337 Matching Results

Search Results

prev Results: 73 - 96 next
open access

Design charts for cross-flow tubular intercoolers charge-across-tube type

Description: Report presenting equations relating the various dimensions, air mass flow, and performance of a cross-flow tubular intercooler in which the charge flows across and the cooling air through the tubes. Design charts are presented from which the intercooler design characteristics and performance can be quickly determined.
Date: January 1941
Creator: Reuter, J. George & Valerino, Michael F.
Item Type: Refine your search to only Report
open access

Design charts for cross-flow tubular intercoolers charge-through-tube type

Description: Report presenting equations relating the various dimensions, air weight flow, and performance of a cross-flow tubular intercooler in which the charge flows through and the cooling air across the tubes. A method of determining and presenting the performance of a given intercooler at various operating conditions is indicated. Results regarding the cooling effectiveness equation, effect of primary intercooler variables, design charts, effect of tube arrangement on intercooler characteristics, and … more
Date: July 1941
Creator: Reuter, J. George & Valerino, Michael F.
Item Type: Refine your search to only Report
open access

The Design of Jet Pumps

Description: This report shows that by applying both energy and impulse theorems the optimum throat dimension of the mixing nozzle and the best shape of intake can be predicted approximately in a relatively simple manner. The necessary length of the mixing nozzle follows from Prandtl's turbulent mixing theory. The calculations are carried out for the mixing of similar and dissimilar fluids.
Date: July 1941
Creator: Flügel, Gustav
Item Type: Refine your search to only Report
open access

Design of Nozzles for the Individual Cylinder Exhaust Jet Propulsion System

Description: Report presenting an examination of the design of exhaust-stack nozzles for individual cylinder exhaust-gas jet propulsion and the results of tests on the effect of nozzle area on jet thrust and engine power. A satisfactory method of correlatig the test data for various engine-operating conditions is developed.
Date: April 1941
Creator: Pinkel, Benjamin; Turner, L. Richard & Voss, Fred
Item Type: Refine your search to only Report
open access

Determination of control-surface characteristics from NACA plain-flap and tab data

Description: From Summary: "The data from previous NACA pressure-distribution investigations of plain flaps and tabs have been analyzed and are presented in this paper in a form readily applicable to the problems of control-surface design. The experimentally determined variation of aerodynamic parameters with flap chord and tab chord are given in chart form and comparisons are made with the theory. With the aid of these charts and the theoretical relationships for a thin airfoil, the aerodynamic characteris… more
Date: February 1941
Creator: Ames, Milton B., Jr. & Sears, Richard I.
Item Type: Refine your search to only Report
open access

Determination of control-surface characteristics from NACA plain-flap and tab data

Description: From Summary: "The data from previous NACA pressure-distribution investigations of plain flaps and tabs with sealed gaps have been analyzed and are presented in this paper in a form readily applicable to the problems of control-surface design. The experimentally determined variation of aerodynamic parameters with flap chord and tab chord are given in chart form and comparisons are made with the theory. With the aid of these charts and the theoretical relationships for a thin airfoil, the aerody… more
Date: 1941
Creator: Ames, Milton B., Jr. & Sears, Richard I.
Item Type: Refine your search to only Report
open access

Determination of optimum plan forms for control surfaces

Description: Solutions found for a range of airfoil plan forms indicate that, regardless of the characteristics of the tail surface, the chord of the rudder or of the elevator should be very nearly constant over its span. The optimum ailerons are also of a characteristic shape, varying little with the plan form of the wing.
Date: January 30, 1941
Creator: Jones, Robert T. & Cohen, Doris
Item Type: Refine your search to only Report
open access

Determination of the Bending and Buckling Effect in the Stress Analysis of Shell Structures Accessible From One Side Only

Description: "The present report describes a device for ascertaining the bending and buckling effect in stress measurements on shell structures accessible from one side only. Beginning with a discussion of the relationship between flexural strain and certain parameters, the respective errors of the test method for great or variable skin curvature within the test range are analyzed and illustrated by specimen example" (p. 1).
Date: December 1941
Creator: Dose, A.
Item Type: Refine your search to only Report
open access

Development of Cowling for Long-Nose Air-Cooled Engine in the NACA Full-Scale Wind Tunnel

Description: "An investigation of cowlings for long-nose radial engines was made on the Curtiss XP-42 fighter in the NACA full-scale wind tunnel. The unsatisfactory aerodynamic characteristics of all the cowlings with scoop inlets tested led to the development of the annular high-velocity inlet cowlings. Tests showed that ratio of cooling-air velocity at cowling inlet to stream velocity should not be less than 0.5 for this type of cowling and that critical compressibility speed can be extended to more than … more
Date: October 1941
Creator: Silverstein, Abe & Guryansky, Eugene R.
Item Type: Refine your search to only Report
open access

Diseases of raspberries and blackberries.

Description: Describes the characteristics of diseases that infect raspberries and blackberries as well as their respective treatments.
Date: September 1941
Creator: Dodge, B. O. (Bernard Ogilvie), 1872-1960.; Wilcox, R. B. (Raymond Boorman), 1889-1949. & Demaree, J. B. (Juan Brewer), 1885-
Item Type: Refine your search to only Book
open access

Drag Measurements of a Protruding 0.50-Caliber Machine Gun

Description: Report presenting drag and cross-wind force measurements of a Browning 0.50-caliber M2 machine gun at a range of air speeds in the NACA wind tunnel. The gun protruded through the top of the tunnel wall into the air stream and tests were performed at a variety of angles in order to determine the power required to turn the gun against the aerodynamic forces and the horsepower absorbed in air drag by the protruding gun. Special attention is given to the jacket around the gun, which seems to provid… more
Date: July 1941
Creator: Luoma, Arvo A.
Item Type: Refine your search to only Report
open access

Drag of Several Gunner's Enclosures at High Speeds

Description: "The drag of several types of gunner's turrets, windshields, blisters, and other protuberances, including projecting guns, was investigated at speeds from 75 to 440 miles per hour in the NACA 8-foot high-speed wind tunnel. The various gunner's enclosures were represented by 1/10 and 1/7 full-size models on a midwing-fuselage combination representative of bomber types. Most of the usual types of retractable turrets are very poor aerodynamically; they caused wind drag increments, dependent upon t… more
Date: July 1941
Creator: Stack, John & Moberg, Richard J.
Item Type: Refine your search to only Report
open access

Dynamic stress calculations for two airplanes in various gusts

Description: Report presenting a series of calculations made to determine the probable dynamic wing stress of two large airplanes in atmospheric gusts. The results indicate that in both isolated and repeated gusts of probable occurrence, the dynamic overstress is about 10 percent when referred to the present static design standard.
Date: September 1941
Creator: Pierce, Harold B.
Item Type: Refine your search to only Report
open access

Effect of Alternately High and Low Repeated Stresses Upon the Fatigue Strength of 25S-T Aluminum Alloy

Description: "Fatigue tests were made on one lot of 3/4 inch diameter rolled-and-drawn 25S-T aluminum-alloy rod normal in composition and tensile properties. The specimens were tested at 3500 cycles per second in a rotating-beam fatigue test machine. Tests were made for three ratios (20:1, 50:1, and 200:1) of the number of cycles applied at low stress to the number applied at high stress. In general, failure occurred when the number of cycles at either the low or the high stress approached the ordinary fati… more
Date: January 1941
Creator: Stickley, G. W.
Item Type: Refine your search to only Report
open access

The effect of external shape upon the drag of a scoop

Description: Report presenting testing of six scoops built using the principles of NACA cowling design to show the advantage of using those principles. Three scoops had a good nose contour with different afterbody lengths and three were of inferior nose shape. Results regarding drag, cooling pressure, and surface pressure survey are provided.
Date: July 1941
Creator: Naiman, Irven & Hill, Paul R.
Item Type: Refine your search to only Report
open access

The Effect of Methods of Testing on the Ultimate Loads Supported by Stiffened Flat Sheet Panels Under Edge Compression

Description: Note presenting testing of two series of stiffened flat sheet specimens tested under edge compression using various end conditions: round ends, flat ends, and continuous panels. The specimens consisted of aluminum-alloy flat sheet stiffened by three hat-shaped extruded aluminum-alloy stiffeners. The results indicated that the length of the specimen has an insignificant effect on the ultimate compressive load.
Date: June 1941
Creator: Holt, Marshall
Item Type: Refine your search to only Report
open access

Effect of Propeller Operation on the Pitching Moments of Single-Engine Monoplanes

Description: Report presenting an investigation of the effects of propeller operation on pitching moments with particular reference to the effect of propeller forces, the field of flow in the slipstream, and the increments of lift on the wing and the tail. A procedure, directly applicable only to single-engine monoplanes without flaps, has been set up for predicting the effect of propeller operation on pitching moments as well.
Date: May 1941
Creator: Goett, Harry J. & Pass, H. R.
Item Type: Refine your search to only Report
Back to Top of Screen