UNT Libraries Government Documents Department - 359 Matching Results

Search Results

prev Results: 97 - 120 next
open access

Pressure-distribution measurements at large angles of pitch on fins of different span-chord ratio on a 1/40-scale model of the U. S. Airship "Akron"

Description: Report presents the results of pressure-distribution measurements on a 1/40-scale model of the U. S. Airship "Akron" conducted in the NACA 20-foot wind tunnel. The measurements were made on the starboard fin of each of four sets of horizontal tail surfaces, all of approximately the same area but differing in span-chord ratio, for five angles of pitch varying from 11.6 degrees to 34 degrees, for four elevator angles, and at air speeds ranging from 56 to 77 miles per hour. Pressures were also mea… more
Date: April 4, 1937
Creator: McHugh, James G.
Item Type: Refine your search to only Report
open access

Wind-tunnel investigation of wings with ordinary ailerons and full-span external-airfoil flaps

Description: Report presents an investigation carried out in the NACA 7- by 10-foot wind tunnel of an NACA 23012 airfoil equipped, first, with a full-span NACA 23012 external-airfoil flap having a chord 0.20 of the main airfoil chord and with a full-span aileron with a chord 0.12 of the main airfoil chord on the trailing edge of the main airfoil and equipped second, with a 0.30-chord full-span NACA 23012 external-airfoil flap and a 0.13-chord full-span aileron. The results are arranged in three groups, the … more
Date: March 12, 1937
Creator: Platt, Robert C. & Shortal, Joseph A.
Item Type: Refine your search to only Report
open access

Alternating-current equipment for the measurement of fluctuations of air speed in turbulent flow

Description: From Summary: "Recent electrical and mechanical improvements have been made in the equipment developed at the National Bureau of Standards for measurement of fluctuations of air speed in turbulent flow. Data useful in the design of similar equipment are presented. The design of rectified alternating-current power supplies for such apparatus is treated briefly, and the effect of the power supplies on the performance of the equipment is discussed."
Date: March 1937
Creator: Mock, W. C., Jr.
Item Type: Refine your search to only Report
open access

Torsion Tests of Tubes

Description: "This report presents the results of tests of 63 chromium-molybdenum steel tubes and 102 17st aluminum-alloy tubes of various sizes and lengths made to study the dependence of the torsional strength on both the dimensions of the tube and the physical properties of the tube material. Three types of failure are found to be important for sizes of tubes frequently used in aircraft construction: (1) failure by plastic shear, in which the tube material reached its yield strength before the critical t… more
Date: February 1937
Creator: Stang, Ambrose H.; Ramberg, Walter & Back, Goldie
Item Type: Refine your search to only Report
open access

An Analytical and Experimental Study of the Effect of Periodic Blade Twist on the Thrust, Torque, and Flapping Motion of an Autogiro Rotor

Description: From Summary: "An analysis is made of the influence on autogiro rotor characteristics of a periodic blade twist that varies with the azimuth position of the rotor blade and the results are compared with experimental data. The analysis expresses the influence of this type of twist upon the thrust, torque, and flapping motion of the rotor. The check against experimental data shows that the periodic twist has a pronounced influence on the flapping motion and that this influence is accurately predi… more
Date: January 28, 1937
Creator: Wheatley, John B.
Item Type: Refine your search to only Report
open access

Wind-Tunnel Investigation of Tapered Wings With Ordinary Ailerons and Partial-Span Split Flaps

Description: Report presents the results of an investigation made in the NACA 7 by 10-foot wind tunnel to determine the aerodynamic properties of tapered wings having partial-span flaps for high lift and ordinary ailerons for lateral control. Each of two Clark-y wings, tapered 5:1 and 5:3, was equipped with partial-span split flaps of two lengths and with ordinary ailerons extending from the outboard ends of the flap to the wing tips. Measurements of wing forces and moments and of aileron hinge moments were… more
Date: January 14, 1937
Creator: Wenzinger, Carl J.
Item Type: Refine your search to only Report
open access

Aerodynamic Characteristics of NACA 23012 and 23021 Airfoils With 20-Percent-Chord External-Airfoil Flaps of NACA 23012 Section

Description: Report presents the results of an investigation of the general aerodynamic characteristics of the NACA 23012 and 23021 airfoils, each equipped with a 0.20c external flap of NACA 23012 section. The tests were made in the NACA 7 by 10-foot and variable-density wind tunnels and covered a range of Reynolds numbers that included values corresponding to those for landing conditions of a wide range of airplanes. Besides a determination of the variation of lift and drag characteristics with position of… more
Date: 1937~
Creator: Platt, Robert C. & Abbott, Ira H.
Item Type: Refine your search to only Report
open access

Air propellers in yaw

Description: Report presents the results of tests conducted at Stanford University of a 3-foot model propeller at four pitch settings and at 0 degree, 10 degrees, 20 degrees, and 30 degrees yaw.
Date: 1937
Creator: Lesley, E. P.; Worley, George F. & Moy, Stanley
Item Type: Refine your search to only Report
open access

Full-Scale Tests of a New Type NACA Nose-Slot Cowling

Description: "An extended experimental study has been made in regard to the various refinements in the design of engine cowlings as related to the propeller-nacelle unit as a whole, under conditions corresponding to take-off, climb, and normal flight. The tests were all conducted at full scale in the 20-foot wind tunnel. This report presents the results of a novel type of engine cowling, characterized by the fact that the exit opening discharging the cooling air is not, as usual, located behind the engine b… more
Date: 1937
Creator: Theodorsen, Theodore; Brevoort, M. J.; Stickle, George W. & Gough, M. N.
Item Type: Refine your search to only Report
open access

Measurements of Intensity and Scale of Wind-Tunnel Turbulence and Their Relation to the Critical Reynolds Number of Spheres

Description: The investigation of wind-tunnel turbulence, conducted at the National Bureau of Standards with the cooperation of the National Advisory Committee for Aeronautics, has been extended to include a new variable, namely, the scale of the turbulence. This report presents the results of a study of this new variable together with the intensity of the turbulence, and the effect of both on the critical Reynolds number of spheres.
Date: 1937
Creator: Dryden, Hugh L.; Schubauer, G. B.; Mock, W. C., Jr. & Skramstad, H. K.
Item Type: Refine your search to only Report
open access

Stress Analysis of Beams With Shear Deformation of the Flanges

Description: This report discusses the fundamental action of shear deformation of the flanges on the basis of simplifying assumptions. The theory is developed to the point of giving analytical solutions for simple cases of beams and of skin-stringer panels under axial load. Strain-gage tests on a tension panel and on a beam corresponding to these simple cases are described and the results are compared with analytical results.
Date: 1937
Creator: Kuhn, Paul
Item Type: Refine your search to only Report
open access

Electrical thermometers for aircraft

Description: Electrical thermometers commonly used on aircraft are the thermoelectric type for measuring engine-cylinder temperatures, the resistance type for measuring air temperatures, and the superheat meters of thermoelectric and resistance types for use on airships. These instruments are described and their advantages and disadvantages enumerated. Methods of testing these instruments and the performance to be expected from each are discussed. The field testing of engine-cylinder thermometers is treated… more
Date: December 15, 1936
Creator: Peterson, John B. & Womack, S. H. J.
Item Type: Refine your search to only Report
open access

Pressure-distribution measurements on O-2H airplane in flight

Description: "Results are given of pressure-distribution measurements made over two different horizontal tail surfaces and the right wing cellule, including the slipstream area, of an observation-type biplane. Measurements were also taken of air speed, control-surface positions, control-stick forces, angular velocities, and accelerations during various abrupt maneuvers. These maneuvers consisted of push-downs and pull-ups from level flight, dive pull-outs, and aileron rolls with various thrust conditions" (… more
Date: December 8, 1936
Creator: Pearson, H. A.
Item Type: Refine your search to only Report
open access

Fuel spray and flame formation in a compression-ignition engine employing air flow

Description: "The effects of air flow on fuel spray and flame formation in a high-speed compression-ignition engine have been investigated by means of the NACA combustion apparatus. The process was studied by examining high-speed motion pictures taken at the rate of 2,200 frames a second. The combustion chamber was of the flat-disk type used in previous experiments with this apparatus. The air flow was produced by a rectangular displacer mounted on top of the engine piston. Three fuel-injection nozzles were… more
Date: November 25, 1936
Creator: Rothrock, A. M. & Waldron, C. D.
Item Type: Refine your search to only Report
open access

Span load distribution for tapered wings with partial-span flaps

Description: Tables are given for determining the load distribution of tapered wings with partial-span flaps placed either at the center or at the wing tips. Seventy-two wing-flap combinations, including two aspect ratios, four taper ratios, and nine flap lengths, are included. The distributions for the flapped wing are divided into two parts, one a zero lift distribution due primarily to the flaps and the other an additional lift distribution due to an angle of attack of the wing as a whole. Comparison bet… more
Date: November 21, 1936
Creator: Pearson, H. A.
Item Type: Refine your search to only Report
open access

An Analysis of Lateral Stability in Power-Off Flight With Charts for Use in Design

Description: "The aerodynamic and mass factors governing lateral stability are discussed and formulas are given for their estimation. Relatively simple relationships between the governing factors and the resulting stability characteristics are presented. A series of charts is included with which approximate stability characteristics may be rapidly estimated" (p. 1).
Date: November 17, 1936
Creator: Zimmerman, Charles H.
Item Type: Refine your search to only Report
open access

Blower Cooling of Finned Cylinders

Description: "Several electrically heated finned steel cylinders enclosed in jackets were cooled by air from a blower. The effect of the air conditions and fin dimensions on the average surface heat-transfer coefficient q and the power required to force the air around the cylinders were determined. Tests were conducted at air velocities between the fins from 10 to 130 miles per hour and at specific weights of the air varying from 0.046 to 0.074 pound per cubic foot. The fin dimensions of the cylinders cover… more
Date: November 14, 1936
Creator: Schey, Oscar W. & Ellerbrock, Herman H., Jr.
Item Type: Refine your search to only Report
open access

The Rolling Friction of Several Airplane Wheels and Tires and the Effect of Rolling Friction on Take-Off

Description: This report presents the results of tests made to determine the rolling friction of airplane wheels and tires under various conditions of wheel loading, tire inflation pressure, and ground surface. The effect of wheel-bearing type was also investigated. Six pairs of wheels and tires were tested including two sizes of each of the types designated as standard (high pressure), low pressure, and extra low pressure. The results of calculations intended to show the effect of variations in rolling fri… more
Date: September 19, 1936
Creator: Wetmore, J. W.
Item Type: Refine your search to only Report
open access

Heat Transfer to Fuel Sprays Injected Into Heated Gases

Description: This report presents the results of a study made of the influence of several variables on the pressure decrease accompanying injection of a relatively cool liquid into a heated compressed gas. Indirectly, this pressure decrease and the time rate of change of it are indicative of the total heat transferred as well as the rate of heat transfer between the gas and the injected liquid. Air, nitrogen, and carbon dioxide were used as ambient gases; diesel fuel and benzene were the injected liquids. T… more
Date: August 25, 1936
Creator: Selden, Robert F. & Spencer, Robert C.
Item Type: Refine your search to only Report
open access

Cooling tests of a single-row radial engine with several NACA cowlings

Description: The cooling of a single-row radial air-cooled engine using several cowling arrangements has been studied in the NACA 20-foot wind tunnel. The results show the effect of the propeller and several cowling arrangements on cooling for various values of the indicated horsepower in the climb condition. A table giving comparative performance of the various cowling arrangements is presented. The dependence of temperature on indicated horsepower and pressure drop across the baffles is shown by charts. O… more
Date: August 20, 1936
Creator: Brevoort, M. J.; Stickle, George W. & Ellerbrock, Herman H., Jr.
Item Type: Refine your search to only Report
open access

A Theory for Primary Failure of Straight Centrally Loaded Columns

Description: "A theory of primary failure of straight centrally loaded columns is presented. It is assumed that the column cross section and the load are constant throughout the length. Primary failure is defined as any type of failure in which the cross sections are translated, rotated, or translated and rotated but not distorted in their own planes" (p. 141).
Date: August 17, 1936
Creator: Lundquist, Eugene E. & Fligg, Claude M.
Item Type: Refine your search to only Report
open access

Strength of Welded Aircraft Joints

Description: "This investigation is a continuation of work started in 1928 and described in NACA-TR-348 which shows that the insertion of gusset plates was the most satisfactory way of strengthening a joint. Additional tests of the present series show that joints of this type could be improved by cutting out the portion of the plate between the intersecting tubes. T and lattice joints in thin-walled tubing 1 1/2 by 0.020 inch have somewhat lower strengths than joints in tubing of greater wall thickness beca… more
Date: August 12, 1936
Creator: Brueggeman, W. C.
Item Type: Refine your search to only Report
open access

A study of the two-control operation of an airplane

Description: The two-control operation of a conventional airplane is treated by means of the theory of disturbed motions. The consequences of this method of control are studied with regard to the stability of the airplane in its unconstrained components of motion and the movements set up during turn maneuvers.
Date: August 12, 1936
Creator: Jones, Robert T.
Item Type: Refine your search to only Report
open access

Flight measurements of the dynamic longitudinal stability of several airplanes and a correlation of the measurements with pilots' observations of handling characteristics

Description: The dynamic longitudinal stability characteristics of eight airplanes as defined by the period and damping of the longitudinal oscillations were measured in flight to determine the degree of stability that may be expected in conventional airplanes. An attempt was made to correlate the measured stability with pilots' opinions of the general handling characteristics of the airplanes in order to obtain an indication of the most desirable degree of dynamic stability. The results of the measurements… more
Date: July 15, 1936
Creator: Soulé, Hartley A.
Item Type: Refine your search to only Report
Back to Top of Screen