You limited your search to:

  Partner: UNT Libraries Government Documents Department
 Serial/Series Title: Argonne National Laboratory Reports
Coupled Hydrodynamic-Structural Response Analysis of Piping Systems
This report describes in detail the expansion of the ICEPEL code for the coupled hydrodynamic-structural response analysis of pipe-elbow loops to general piping systems. A generalized piping-component model, a branching tce junction, and a surge-tank model are introduced and coupled with the pipe-elbow loop model so that a general piping system under the effect of internally traveling pressure pulses can be analyzed hydrodynamically, as well as structurally. digital.library.unt.edu/ark:/67531/metadc283270/
ICEPEL Analysis of and Comparison with Simple Elastic-Plastic Piping Experiments
The results of simple elastic-plastic piping experiments for straight pipes and single-elbow loop systems are interpreted and evaluated. The experiments are also analyzed by the ICEPEL piping code, and the analytical results are compared against the experimental data. digital.library.unt.edu/ark:/67531/metadc303854/
Conceptual Design of a Rapid-Cycling Synchrotron for the KFA-Juelich Spallation Neutron Source
An accelerator group was established at ANL by the request of KFA-Juelich to carry out a conceptual design study and cost estimate for a rapid-cycling synchrotron as a possible first stage program on spallation neutron sources at KFA-Juelich. This set of notes is the individual notes which form the basis of the final report under this proposal prepared in January 1983. This document contains 37 papers/notes for Advanced Accelerator Development - Neutron Source Series Notes...numbered AAD-N-1 through AAD-N-37. Each note or paper is written by various authors. digital.library.unt.edu/ark:/67531/metadc283580/
Reaction of Glass During Gamma Irradiation in a Saturated Tuff Environment, Part 3: Long-Term Experiments at 1x10^4 Rad/Hour
Report on experiments to assess the importance of radiation effects on waste glass corrosion. This third part contains a description of the experiments, results, and discussion, with conclusions and related appendices. digital.library.unt.edu/ark:/67531/metadc282864/
Sodium Waste Technology : a Summary Report
The Sodium Waste Technology (SWT) Program was established to resolve long-standing issues regarding disposal of sodium-bearing waste and equipment. Comprehensive SWT research programs investigated a variety of approaches for either removing sodium from sodium-bearing items, or disposal of items containing sodium residuals. The most successful of these programs was the design, test, and the production operation of the Sodium Process Demonstration Facility at ANL-W. The technology used was a series of melt-drain-evaporate operations to remove nonradioactive sodium from sodium-bearing items and then converting the sodium to storable compounds. digital.library.unt.edu/ark:/67531/metadc282805/
Advanced Fuel Cell Development Progress Report: April-June 1983
Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes efforts on development of molten carbonate fuel cells directed toward seeking alternative cathode materials to NiO. Based on an investigation of the thermodynamically stable phases formed under cathode conditions with a number of transition metal oxides, synthesis of prospective alternative cathode materials and doping of these materials to promote electronic conductivity is under way. digital.library.unt.edu/ark:/67531/metadc283367/
Advanced Fuel Cell Development Progress Report: January-March 1978
Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes the development of electrolyte structures which have good electrolyte retention and mechanical properties as well as long term stability, and on developing methods of synthesis amenable to mass production. digital.library.unt.edu/ark:/67531/metadc303744/
Advanced Fuel Cell Development Progress Report: October-December 1977
Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes work aimed at understanding and improving the performance of fuel cells having molten alkali-carbonate mixtures as electrolytes; the fuel cells operate at temperatures near 925 K. digital.library.unt.edu/ark:/67531/metadc283607/
Advanced Fuel Cell Development Progress Report: April-June 1977
Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes activities directed toward understanding and improvement of molten-carbonate-electrolyte fuel cells operating at temperatures near 923 Kelvin. digital.library.unt.edu/ark:/67531/metadc283224/
Advanced Fuel Cell Development Progress Report: July-September 1977
Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). digital.library.unt.edu/ark:/67531/metadc283258/
Advanced Fuel Cell Development Progress Report: July-September 1983
Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes activities seeking alternative cathode materials to NiO for molten carbonate fuel cells. digital.library.unt.edu/ark:/67531/metadc173304/
Advanced Fuel Cell Development Progress Report: July-September 1984
Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes studies directed toward seeking alternative cathode materials to NiO for molten carbonate fuel cells. digital.library.unt.edu/ark:/67531/metadc282730/
Advanced Fuel Cell Development Progress Report: October-December 1983
Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes activities directed toward seeking alternative cathode materials to NiO for molten carbonate fuel cells. digital.library.unt.edu/ark:/67531/metadc173318/
Advanced Fuel Cell Development Progress Report: April-June 1978
Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes efforts directed toward understanding and improving the components of molten-carbonate-electrolyte fuel cells operated at temperatures near 925 K. digital.library.unt.edu/ark:/67531/metadc303820/
Advanced Fuel Cell Development Progress Report: July-September 1978
Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes activities focuses on the development of electrolyte structures that have good electrolyte retention and mechanical properties as well as long term stability, and on developing methods of synthesis amenable to mass production. digital.library.unt.edu/ark:/67531/metadc303843/
SYN3D: a Single-Channel, Spatial Flux Synthesis Code for Diffusion Theory Calculations
This report is a user's manual for SYN3D, a computer code which uses single-channel, spatial flux synthesis to calculate approximate solutions to two- and three-dimensional, finite-difference, multi-group neutron diffusion theory equations. SYN3D is designed to run in conjunction with any one of several one- and two-dimensional, finite-difference codes (required to generate the synthesis expansion functions) currently being used in the fast reactor community. The report describes the theory and equations, the use of the code, and the implementation on the IBM 370/195 and CDC 7600 of the version of SYN3D available through the Argonne Code Center. digital.library.unt.edu/ark:/67531/metadc282667/
The Utility Subroutine Package Used by Applied Physics Division Export Codes
This report describes the current state of the utility subroutine package used with codes being developed by the staff of the Applied Physics Division. The package provides a variety of useful functions for BCD input processing, dynamic core-storage allocation and management, binary I/O and data manipulation. The routines were written to conform to coding standards which facilitate the exchange of programs between different computers. digital.library.unt.edu/ark:/67531/metadc283572/
Reactor Development Program Progress Report: April 1963
Report issued by the Argonne National Laboratory discussing progress made by the Reactor Development Program during April 1963. Reactor physics, experiments, and safety studies are presented. This report includes tables, and illustrations. digital.library.unt.edu/ark:/67531/metadc170903/
Reactor Development Program Progress Report: March 1963
Report issued by the Argonne National Laboratory discussing progress made by the Reactor Development Program during March 1963. Reactor physics, experiments, and safety studies are presented. This report includes tables, and illustrations. digital.library.unt.edu/ark:/67531/metadc170900/
Reactor Development Program Progress Report: May 1966
Report issued by the Argonne National Laboratory discussing progress made by the Reactor Development Program during May 1966. Reactor physics, experiments, and safety studies are presented. This report includes tables, and illustrations. digital.library.unt.edu/ark:/67531/metadc170908/
Reactor Development Program Progress Report: November 1965
Report issued by the Argonne National Laboratory discussing progress made by the Reactor Development Program during November 1965. Reactor physics, experiments, and safety studies are presented. This report includes tables, and illustrations. digital.library.unt.edu/ark:/67531/metadc170906/
Reactor Development Program Progress Report: September 1966
Report issued by the Argonne National Laboratory discussing progress made within the Reactor Development Program for September, 1966. The report includes highlights of the different project activities including plutonium utilization, fast breeder reactors, general reactor technology, advanced systems research, and nuclear safety. This report includes tables, illustrations, and photographs. digital.library.unt.edu/ark:/67531/metadc170910/
Numerical Integration of Large Deflection Elastic-Plastic Axisymmetric Shells of Revolution
The improvement in the method of large deflection elastic-plastic analysis of shells and other structures appears to have continued interest. With the development in this work an improved numerical suppression scheme is now available for the large deflection elastic-plastic analysis of axisymmetric shells of revolution subjected to symmetric loadings. Quasi-linearization of Sander's non-linear shell equations is presented for the first time. With these quasi-linearized equations the suppression scheme has been developed to solve non-linear boundary-value problems. This suppression scheme has been used in conjunction with a Newton-Raphson method to improve a stable convergence process at the yield surface in elastic-plastic problems. Results presented indicate the accuracy of this numerical scheme. It appears to be possible to extend this method for more complicated situations. digital.library.unt.edu/ark:/67531/metadc282692/
Application of NMR Spectroscopy and Multidimensional Imaging to the Gelcasting Process and in-situ Real-Time Monitoring of Cross-Linking Polyacrylamide Gels
In the gelcasting process, a slurry of ceramic powder in a solution of organic monomers is cast in a mold. The process is different from injection molding in that it separates mold-filling from setting during conversion of the ceramic slurry to a formed green part. In this work, NMR spectroscopy and imaging have been conducted for in-situ monitoring of the gelation process and for mapping the polymerization. ¹H nuclear magnetic resonance spectra have been obtained during polymerization of a premix of soluble reactive methacrylamide (monomer) and N, N'-methylene bisacrylamide (cross-linking molecules). The premix was polymerized by adding ammonium persulfate (initiator) and tetramethyl-ethylene-diamine (accelerator) to form long-chain, cross-linked polymers. The time-varying spin-lattice relaxation times T₁ during polymerization have been studied at 25 and 35 C, and the variation of spectra and T₁ with respect to extent of polymerization has been determined. To verify homogeneous polymerization, multidimensional NMR imaging was utilized for in-situ monitoring of the process. The intensities from the images are modeled and the correspondence shows a direct extraction of T₁ data from the images. digital.library.unt.edu/ark:/67531/metadc283183/
Solidification Modeling of a Spiral Casting to Determine Material Fluidity
In casting, fluidity is the measure of the distance a metal can flow in a channel before being stopped by solidification. During mold filling, the metal loses heat to the surrounding mold, thereby cooling and becoming more viscous until the leading portion solidifies and no further flow is possible. A coupled heat-transfer and fluid-flow modeling of a spiral, involving the use of thermophysical properties to determine material fluidity, has been conducted. Simulations of these experiments utilized the Casting Process Simulator (CaPS) software developed at Argonne National Laboratory. Two types of spiral geometries with different assumptions were considered: (1) a two-dimensional laterally stretched spiral and (2) a three-dimensional lateral spiral. The computer extent of mold filling is in good agreement with the experimental results. Time required by the metal/gas interface to attain specific positions in the spiral arm also compares favorably with the experimental results. The influence of process variables, especially pour time, is discussed. The CaPS software has been used as a computational tool to investigate the validity of the dimensionality assumptions and to evaluate the ability of CaPS to model fluidity adequately. digital.library.unt.edu/ark:/67531/metadc283160/
Development and Demonstration of Compound Parabolic Concentrators for Solar Thermal Power Generation and Heating and Cooling Applications, Progress Report: July-December 1975
Progress report describing the development of Compound Parabolic Concentrators (CPC). A tenfold concentrator with a cavity receiver was constructed and tested. The optical efficiency was very good (65 percent), but the thermal performance was degraded by heat losses of the cavity receiver. A summary of the results of subcontracts described in the previous progress report are presented, and the influence of these results on ANL programs is noted. digital.library.unt.edu/ark:/67531/metadc282715/
The Transient Behavior of Single-Phase Natural Circulation Water Loop Systems
Report issued by the Argonne National Laboratory discussing single-phase water loop systems. As stated in the introduction, "the principal objective of this study was to determine the reliability of the calculations based upon numerical solutions of finite-difference energy and flow equations" (p. 9). This report includes tables, illustrations, and photographs. digital.library.unt.edu/ark:/67531/metadc67179/
An Interim Report on the Development and Application of Environmental Mapped Data Digitization, Encoding, Analysis, and Display Software for the ALICE System, Volume 1
Report discusses the development of the existing ALICE Image Processing System into a computer-aided digitization, encoding, analysis and display system for mapped information pertaining to the environment and its elements. digital.library.unt.edu/ark:/67531/metadc283400/
An Overview of Pool-Type LMFBRs : General Characteristics
This report describes the results of a study conducted by a "Pool Study Group" organized at ANL in mid-1975 to examine the present state of the air of design of pool-type LMFBRs. The study concentrated on examination of various design options used to date in the principle pool-type projects and design studies in this country and abroad, including the Phenix and Super-Phenix reactors (France), PFR and CFR (U.K.), RN-600 (U.S.S.R.) and EBR-II (U.S.A.). The objective of the report is to provide a step toward better understanding of the pool-type system and of the advantages and disadvantages of the various possible approaches to its design. digital.library.unt.edu/ark:/67531/metadc282705/
Engineering Properties of Diphenyl
Report issued by the Argonne National Laboratory discussing engineering properties of diphenyl. As stated in the abstract, "data collected from the literature on the vapor pressure, enthalpy, liquid density, and vapor density of pure diphenyl are presented. A Mollier diagram, a temperature entropy diagram, and data on viscosity of diphenyl as a function of temperature are also presented" (p. 5). This report includes tables, and illustrations. digital.library.unt.edu/ark:/67531/metadc67175/
Final Report on the Small-Scale Vapor-Explosion Experiments Using a Molten NaCl-H2O System
Vapor explosions were produced by injecting small quantities of water into a container filled with molten sodium chloride. Minimum explosion efficiencies, as evaluated from reaction-impulse measurements, were relatively large. Subsurface movies showed that the explosions resulted from a two-step sequence: an initial bulk-mixing phase in which the two liquids intermix on a large scale, but remain locally separated by an insulating gas-vapor layer; and a second step, immediately following breakdown of the gas layer, during which the two liquids locally fragment, intermix, and pressurize very rapidly. The experimental results were compared with various mechanistic models that had been proposed to explain vapor explosions. Early models seemed inconsistent with the results. More recent theories suggest that vapor explosions may be caused by a nucleation limit or by dynamic mixing combined with high surface-heat-transfer rates. Both types of models are consistent with the results. digital.library.unt.edu/ark:/67531/metadc282701/
Survey and Status Report on Application of Acoustic-Boiling-Detection Techniques to Liquid-Metal-Cooled Reactors
Report issued by the Argonne National Laboratory discussing acoustic-boiling-detection techniques. As stated in the abstract, "this report summarizes literature through June 1967 concerning acoustic methods. In the acoustic method for boiling detection, either acoustic waveguides or high-temperature acoustic sensors are recommended" (p. 1). This report includes tables, and illustrations. digital.library.unt.edu/ark:/67531/metadc67204/
A Residential Energy Consumption Analysis Utilizing the DOE-1 Computer Program
The DOE-1 computer program under development by Argonne National Laboratory, Lawrence Berkeley Laboratory, and Los Alamos Scientific Laboratory is used to examine energy consumption in a typical middle-class household in Cincinnati, Ohio. The program is used to compare energy consumption under different structural and environmental conditions including various levels of insulation in the walls and ceiling, double and single glazing of windows, and thermostat setback schedules. digital.library.unt.edu/ark:/67531/metadc283294/
7-GeV Advanced Photon Source Beamline Initiative. Conceptual Design Report
The DOE is building a new generation 6-7 GeV Synchrotron Radiation Source known as the Advanced Photon Source (APS) at Argonne National Laboratory. This facility, to be completed in FY 1996, can provide 70 x-ray sources of unprecedented brightness to meet the research needs of virtually all scientific disciplines and numerous technologies. The technological research capability of the APS in the areas of energy, communications and health will enable a new partnership between the DOE and US industry. Current funding for the APS will complete the current phase of construction so that scientists can begin their applications in FY 1996. Comprehensive utilization of the unique properties of APS beams will enable cutting-edge research not currently possible. It is now appropriate to plan to construct additional radiation sources and beamline standard components to meet the excess demands of the APS users. In this APS Beamline Initiative, 2.5-m-long insertion-device x-ray sources will be built on four straight sections of the APS storage ring, and an additional four bending-magnet sources will also be put in use. The front ends for these eight x-ray sources will be built to contain and safeguard access to these bright x-ray beams. In addition, funds will be provided to build standard beamline components to meet scientific and technological research demands of the Collaborative Access Teams. The Conceptual Design Report (CDR) for the APS Beamline Initiative describes the scope of all the above technical and conventional construction and provides a detailed cost and schedule for these activities. The document also describes the preconstruction R & D plans for the Beamline Initiative activities and provides the cost estimates for the required R & D. digital.library.unt.edu/ark:/67531/metadc283143/
7-GeV Advanced Photon Source : Conceptual Design Report
During the past decade, synchrotron radiation emitted by circulating electron beams has come into wide use as a powerful, versatile source of x-rays for probing the structure of matter and for studying various physical processes. Several synchrotron radiation facilities with different designs and characteristics are now in regular operation throughout the world, with recent additions in this country being the 0.8-GeV and 2.5-GeV rings of NSLS at Brookhaven National Laboratory. However, none of the operating facilities has been designed to use a low-emittance, high-energy stored beam, together with modern undulator devices, to produce a large number of hard x-ray beams of extremely high brilliance. This document is a proposal to the Department of Energy to construct and operate high-energy synchrotron radiation facility at Argonne National Laboratory. We have now chosen to set the design energy of this facility at 7.0 GeV, with the capability to operate at up to 7.5 GeV. digital.library.unt.edu/ark:/67531/metadc282823/
7-GeV Advanced Photon Source Instrumentation Initiative. Conceptual Design Report
In this APS Instrumentation Initiative, 2.5-m-long and 5-m-long insertion-device x-ray sources will be built on 9 straight sections of the APS storage ring, and an additional 9 bending-magnet sources will also be put in use. The front ends for these 18 x-ray sources will be built to contain and safeguard access to these bright x-ray beams. In addition, funds will be provided to build state-of-the-art insertion-device beamlines to meet scientific and technological research demands well into the next century. This new initiative will also include four user laboratory modules and a special laboratory designed to meet the x-ray imaging research needs of the users. The Conceptual Design Report (CDR) for the APS Instrumentation Initiative describes the scope of all the above technical and conventional construction and provides a detailed cost and schedule for these activities. According to these plans, this new initiative begins in FY 1994 and ends in FY 1998. The document also describes the preconstruction R & D plans for the Instrumentation Initiative activities and provides the cost estimates for the required R & D. digital.library.unt.edu/ark:/67531/metadc283119/
1986 Annual Site Environmental Report for Argonne National Laboratory
Report on the ongoing environmental monitoring program at Argonne National Laboratory. digital.library.unt.edu/ark:/67531/metadc282817/
Annex to 7-GeV Advanced Photon Source : Conceptual Design Report
The Annex to the 7-GeV Advanced Photon Source Conceptual Design Report updates the Conceptual Design Report of 1987 (CDR-87) to include the results of further optimization and changes of the design during the past year. The design changes can be summarized as affecting three areas: the accelerator system, conventional facilities, and experimental systems. Most of the changes in the accelerator system result from inclusion of a positron accumulator ring (PAR), which was added at the suggestion of the 1987 DOE Review Committee, to speed up the filling rate of the storage ring. The addition of the PAR necessitates many minor changes in the linac system, the injector synchrotron, and the low-energy beam transport lines. 63 figs., 18 tabs. digital.library.unt.edu/ark:/67531/metadc282824/
Annual Site Environmental Report for Argonne National Laboratory
Report on the environmental impact of Argonne National Laboratory. digital.library.unt.edu/ark:/67531/metadc282863/
Application of International Safeguards to Fast Critical Assembly Facilities. FY 1980 Summary Report
Nuclear materials inventory-verification techniques for large split-table fast critical assemblies are being studied in this program. Emphasis has been given to techniques that minimize fuel handling in order to reduce facility downtime and radiation exposure to the inventory team. The techniques studied include drawer seals, autoradiography, and spectral index measurements. Two-drawer sealing techniques have been studied, and the relative strengths and weaknesses are pointed out. The rod-type locking mechanism would not disrupt the reactor cooling air flow or interfere with autoradiography but is more expensive to implement. Passive autoradiography was used in a ZPPR inventory to verify to a 93% confidence level that less than 8-kg plutonium was missing. The inventory was completed in four days by a five-member team with radiation exposures well within acceptable limits. Two autoradiographic film packages were developed to distinguish HEU from a DU matrix. The 30-mil pack requires an exposure between 4 and 16 hours and fits into most of the drawers. The 40-mil pack requires only a two-hour exposure but fits into less than half the drawers. digital.library.unt.edu/ark:/67531/metadc283486/
Argonne National Laboratory Annual Report: 1956
Report issued by the Argonne National Laboratory discussing the variety of work done at the laboratory during the year of 1956. This report includes tables, illustrations, and photographs. digital.library.unt.edu/ark:/67531/metadc67182/
Argonne National Laboratory Annual Report: 1957
Report issued by the Argonne National Laboratory discussing the variety of work done at the laboratory during the year of 1957. This report includes tables, illustrations, and photographs. digital.library.unt.edu/ark:/67531/metadc67183/
Argonne National Laboratory Annual Report: 1958
Report issued by the Argonne National Laboratory discussing the variety of work done at the laboratory during the year of 1958. This report includes tables, illustrations, and photographs. digital.library.unt.edu/ark:/67531/metadc67184/
Argonne National Laboratory-East Site Environmental Report for Calendar Year 1989
This report discusses the results of the environmental monitoring program at Argonne National Laboratory (ANL) for 1989. To evaluate the effects of ANL operations on the environment, samples of environmental media collected on the site, at the site boundary, and off the ANL site were analyzed and compared. A variety of radionuclides were measured in air, surface water, groundwater, soil, grass, bottom sediment, and milk samples. digital.library.unt.edu/ark:/67531/metadc283003/
Community Systems Program: Its Goals and Accomplishments, 1978
The Community Systems Program is concerned with conserving energy and scarce fuels through new methods of satisfying the energy needs of American communities. These programs are designed to develop innovative ways of combining current, emerging, and advanced technologies into Integrated Community Energy Systems (ICES) that could furnish any, or all, of the energy-using services of a community. The key goals of the Community System Program then, are to identify, evaluate, develop, demonstrate, and deploy energy systems and community designs that will optimally meet the needs of various communities. Integrated systems offer considerable potential for fuel substitution, thereby allowing the use of non-scarce fuel resources that would not be economically usable in smaller unintegrated systems. Input energy sources for such systems may include low-grade waste heat, solid and liquid wastes, solar and geothermal heat, seawater heat dissipation, and use of less-scarce fuels, such as coal and biomass. A Grid-Connected ICES uses a central co-generation plant and distribution system to provide heating, cooling, and electrical energy services. During 1977, contracts for the following Grid-Connected ICES (G-C ICES) demonstration teams were negotiated: City of Independence, Missouri; Clark University; City of Trenton, New Jersey; Health Education Authority of Louisiana (HEAL); and University of Minnesota. A coal-using ICES, proposed for Georgetown University, also has made noticeable strides toward demonstration of the concept. digital.library.unt.edu/ark:/67531/metadc303839/
Design and Hazards Summary Report Boiling Reactor Experiment V (BORAX V)
Report describing the design and usage of the BORAX V nuclear reactor, its surrounding facility, systems, experimental programs, and possible hazards. digital.library.unt.edu/ark:/67531/metadc11551/
The EBWR: Experimental Boiling Water Reactor
Report issued by the Argonne National Laboratory discussing the Experimental Boiling Water Reactor (EBWR) power plant. Designs of the final EBWR power plant are presented. This report includes tables, illustrations, and photographs. digital.library.unt.edu/ark:/67531/metadc67181/
Environmental Monitoring at Argonne National Laboratory, Annual Report: 1976
Annual report of the environmental monitoring program at Argonne National Laboratory, discussing activities and findings of the group. digital.library.unt.edu/ark:/67531/metadc282950/
Environmental Monitoring at Argonne National Laboratory, Annual Report: 1977
Annual report discussing results of environmental monitoring program to determine Argonne operations' effect on environment. digital.library.unt.edu/ark:/67531/metadc303733/
Environmental Pollutants and the Urban Economy : Phase 1. Final Report, June 1972-October 1975
Costs and benefits of various urban air pollution control policies have been examined in Phase 1 of the Environmental Pollutants and the Urban Economy study being conducted jointly by Argonne National Laboratory and the University of Chicago. The need for sound economic evaluation of air quality regulations is evidenced by the resistance of many industries to pollution control policies based solely on the technical feasibility of achieving public health-related standards. For many firms that emit air pollutants, the cost of not complying with some regulations is significantly less than the cost of compliance. This final report on the Phase 1 research presents highlights of what has been learned, the mechanisms developed for transferring results to users, a bibliography of documents produced during the project, and a collection of correspondence, articles, and evaluation illuminating the use of project work by others. digital.library.unt.edu/ark:/67531/metadc282713/
FIRST PREV 1 2 3 4 5 NEXT LAST