UNT Libraries Government Documents Department - 9 Matching Results

Search Results

Results: 1 - 9
open access

Boosted Performance of a Compression-Ignition Engine With a Displaced Piston

Description: From Summary: "Performance tests were made using a rectangular displacer arranged so that the combustion air was forced through equal passages at either end of the displacer into the vertical-disk combustion chamber of a single-cylinder, four-stroke-cycle compression-ignition test engine. After making tests to determine optimum displacer height, shape, and fuel-spray arrangement, engine-performance tests were made at 1,500 and 2,000 r.p.m. for a range of boost pressures from 0 to 20 inches of m… more
Date: May 1936
Creator: Moore, Charles S. & Foster, Hampton H.
Item Type: Refine your search to only Report
open access

Calculated Effect of Various Types of Flap on Take-Off Over Obstacles

Description: "In order to determine whether or not flaps could be expected to have any beneficial effect on take-off performance, the distances required to take off and climb to an altitude of 50 feet were calculated for hypothetical airplanes, corresponding to relatively high-speed types and equipped with several types of flap. The types considered are the Fowler wing, the Hall wing, the split flap, the balanced split flap, the plain flap, and the external-airfoil flap. The results indicate that substantia… more
Date: May 1936
Creator: Wetmore, J. W.
Item Type: Refine your search to only Report
open access

Chief Characteristics and Advantages of Tailless Airplanes

Description: This study will be concerned with the critical examination of two main questions, mainly, susceptibility of centering and more generally, the conditions of static stability, longitudinal equilibrium, and the question of dynamic stability, or at least the damping of longitudinal vibrations about a position of equilibrium that may result from a small variation in the angle of attack.
Date: May 1936
Creator: Dufaure De Lajarte, A.
Item Type: Refine your search to only Report
open access

Full-scale tests of NACA cowlings

Description: A comprehensive investigation has been carried on with full-scale models in the NACA 20-foot wind tunnel, the general purpose of which is to furnish information in regard to the physical functioning of the composite propeller-nacelle unit under all conditions of take-off, taxiing, and normal flight. This report deals exclusively with the cowling characteristics under condition of normal flight and includes the results of tests of numerous combinations of more than a dozen nose cowlings, about a… more
Date: May 18, 1936
Creator: Theodorsen, Theodore; Brevoort, M. J. & Stickle, George W.
Item Type: Refine your search to only Report
open access

Propulsion of a flapping and oscillating airfoil

Description: Formulas are given for the propelling or drag force experience in a uniform air stream by an airfoil or an airfoil-aileron combination, oscillating in any of three degrees of freedom; vertical flapping, torsional oscillations about a fixed axis parallel to the span, and angular oscillations of the aileron about a hinge.
Date: May 4, 1936
Creator: Garrick, I. E.
Item Type: Refine your search to only Report
open access

Similitude in Hydrodynamic Tests Involving Planing

Description: The problems of using models in planing tests are addressed. If one passes from the model to a hull of linear dimensions n times greater, the speeds are connected by the law of mechanical similitude. The normal forces given by the hydrodynamic equations (perfect fluid) also follow the law of dynamic similitude (Reech's method) and are multiplied by n(exp 3). A series of tests were performed and the actual results were compared to theoretical results.
Date: May 1936
Creator: Gruson, M. F.
Item Type: Refine your search to only Report
open access

Tank Tests of a Model of the NC Flying-Boat Hull - N.A.C.A. Model 44

Description: "A 1/7.06 full-size model of the NC-type hull was tested in the N.A.C.A. tank by both the general method and the specific or free-to-trim method. The results of the tests are given in curves plotted as non dimensional coefficients and are compared with the test results of N.A.C.A. model 11-A. The NC model (N.A.C.A. model 44) shows higher resistance than model 11-A at hump speed but lower resistance at high speeds. Model 44 has a higher best trim angle at the jump and a lower maximum positive tr… more
Date: May 1936
Creator: Bell, Joe W.
Item Type: Refine your search to only Report
open access

Tests of N.A.C.A. airfoils in the variable-density wind tunnel. Series 230

Description: The results of tests of six airfoils having the N.A.C.A. 230 mean line and varying in thickness from 0.06c to 0.21c are presented. These results agree with previous findings in showing that aerodynamically the best section is one of moderate thickness. The data are of value mainly in connection with the design of tapered wings having sections based on the N.A.C.A. 230 mean line.
Date: May 1936
Creator: Jacobs, Eastman N. & Pinkerton, Robert M.
Item Type: Refine your search to only Report
Back to Top of Screen