Search Results

open access

A Miniature Mixer Settler

Description: Unit developed at Knolls Atomic Power Laboratory for extraction and overcomes the disadvantages of the batch countercurrent units currently in use.
Date: January 5, 1956
Creator: Alter, H. Ward; Coplan, B. V. & Zebroski, E. L.
open access

Maximum Allowable Concentration for Air-Borne Beta Contamination

Description: The following report discusses an equation derived by which the maximum allowable concentration in the atmosphere of a beta-omitting isotope for which lung damage is the limiting consideration can be calculated.
Date: July 5, 1951
Creator: Bailey, J. C. & Henry, H. F.
open access

Liquid Metal Fuel Reactor Experiment: Dynamic Utility Test Loop

Description: This report provides an overview of the creation of the Liquid Metal Fuel Reactor Experiment program. It furthers the work by constructing a single loop to test all the components required for the 16 loop reactor. This utility loop was also constructed to provide a facility for testing various components such as valves and flow meters.
Date: May 5, 1959
Creator: Baker, O. H.
open access

Aircraft Nuclear Propulsion Project Quarterly Progress Report for Period Ending June 10, 1952

Description: This quarterly progress report details ongoing work at the Oak Ridge National Laboratory as part of the Aircraft Nuclear Propulsion Project. Topics of discussion include reactor theory and design, shielding research, materials research, appendixes with information on ongoing analytical chemical studies.
Date: August 5, 1952
Creator: Briant, R. C.; Buck, J. H.; Miller, A. J. & Cottrell, W. B.
open access

Preliminary Report on Recovery of Uranium From Low Grade Belgian Congo Ores

Description: Leaching investigations on low grade Belgian Congo uranium ores and recovery of uranium from acid leach solutions by uranous phosphate precipitation, uranyl phosphate precipitation and by sodium carbonate retreatment of alkali precipitates are described.
Date: October 5, 1951
Creator: Brunner, J. J.; George, D'Arcy R. & Rubino, E. M.
open access

The Development of Fixed Screen Resin-In-Pulp Devices

Description: A resin-in-pulp process was developed using a series of fixed-screen or Winchester cells. Various laboratory and pilot plant models were constructed and tested under simulated plant conditions. The fixed-screen device proved very effective in the recovery of uranium and/or vanadium by a continuous, resin-in-pulp process.
Date: August 5, 1954
Creator: Charles, W. D.; Thorpe, D. F.; Lower, G. W.; Kaufman, David; Schiff, Norman N.; Abrams, Charles S. et al.
open access

Preliminary Reconnaissance Work in the Rattlesnake Area, Apache County, Arizona

Description: From introduction: The Bluff-Salt Wash contact was mapped on aerial photographs. Mines and prospects were also plotted on the photos. The mines and prospects were studied and a brief description of the mineralization and its occurrence was written. These field notes, which will be given to Hatfield and party, contain data on the presence of carbon and fossil logs, lithology of the gangue rock, sedimentary structures, etc. Regional structure and evidence for igneous activity were also noted.
Date: September 5, 1952
Creator: Hill, John F. & Blagbrough, John W.
open access

MTR Technical Branch Quarterly Report for First Quarter - 1954

Description: The following report is a quarterly report for first quarter in 1954 for the Phillips Petroleum Company. During the first quarter of 1954 considerable progress was made on the design, construction and testing required to initiate work on new programs. The result of this is the beginning construction and design on the Reactivity Measurement Facility.
Date: December 5, 1955
Creator: Huffman, J. R.
open access

Feasibility Study of a Neutron Flux Bolometer

Description: Abstract: "A small low impedance flux monitoring device has been built which utilizes the heating (and consequent chance in resistance) of a boron coated platinum wire. Feasibility tests in the Argonne-GP-3 reactor indicate that it may develop into a wide range instrument, particularly useful at high flux levels. Design and constructional details of the bolometer and its associated circuits are given. The circuitry is somewhat unique since it is in effect an all electronic self-balancing bridge… more
Date: September 5, 1951
Creator: Leonard, Robert R.
open access

Neutron Total Cross Section for Bismuth and Uranium Between 45 and 160 Mev

Description: "Neutron total cross sections for bismuth and uranium have been measured in a good geometry transmission experiment, using a time-of-flight instrumentation. The source of neutrons was the stripped deuteron beam of the 184-inch synchrocyclotron. The results are shown in Fig. 1. Uncertainties are shown in terms of standard deviations, due to counting statistics only, and to energy channel width."
Date: August 5, 1953
Creator: Linlor, William I., 1915- & Ragent, Boris
open access

Gas Plated Coatings on Metals and Alloys : Progress Report No. 6 and Final Report

Description: The object of the work performed under this contract was to investigate the possibility of gas plating copper base metal with (a) pure chromium metal from chromium hexacarbonyl vapor; (b) chromium-nickel plating from a mixture of chromium hexacarbonyl and nickel tetracarbonyl. The object of the work performed during the final month was to confirm the fact that the gas plating of chromium metal and chromium-nickel laminates free from nitrides, oxides and carbides was practical.
Date: June 5, 1953
Creator: Nack, Herman; Bulloff, Jack J. & Whitacre, John R.
open access

Analysis of Lid Tank Neutron Data for Lead and Iron

Description: Abstract: An analysis of the lid tank neutron data for Pb-H2O and Fe-H2O is made. "Effective" fast neutron cross sections for the metals are obtained. This is based on the "one collision theory" of shielding. Values are 3.4 barns for Pb and 2.0 barns for Fe. These compare very well with those obtained by Albert and Welton based on other lid tank data and another method of calculation.
Date: January 5, 1951
Creator: Podgor, S.
open access

Reconnaissance of Henry Mountains Area, Wayne and Garfield Counties, Utah

Description: From introduction: A trip into the Henry Mountains area occupied the days from March 6 to 9, 1951, inclusive, excepting March 7, which was used to examine Reo Hunt's deposit in Poison Spring Wash. Observations were made on stratigraphy, regional geology, and the locations of the known deposits of uranium and vanadium.
Date: April 5, 1951
Creator: Reinhardt, E. V.
open access

Progress Report on Loading of Titanium with Deuterium

Description: Report issued by the University of California Radiation Laboratory discussing an experiment in which a system was designed and built to load titanium with deuterium gas of a high purity. It discusses the results and the parameters affecting the amounts and purity of the absorbed gas.
Date: May 5, 1955
Creator: Ruff, James W.
open access

Grain Refinement of the As-Cast Uranium-5 w/o Chromium Alloy by Ternary Additions

Description: Abstract: "Refinement of grain size of the base uranium-chromium eutectic alloy (uranium-5 w/o chromium) by ternary additions is discussed. Thirteen additions to the base alloy were investigated, and three additions were found to exhibit worthwhile grain-refinement tendencies. The three alloys, uranium-5 w/o chromium-0.2 w.o molybdenum, uranium-5 w/o chromium-0.2 w/o germanium, and uranium-5 w/o chromium-0.2 w/o niobium, were heat treated to produce final grain-size structures of between 0.015 … more
Date: July 5, 1955
Creator: Saller, Henry A.; Dickerson, Ronald F.; Murr, William E. & Bauer, Arthur A.
open access

Removal of Deuterated Boric Acid From Deuterium Oxide Solution by Ion Exchange Resin

Description: Introduction: "Because of the importance of the value of the transport mean free path of thermal neutrons in deuterium oxide, Kash and Woods proposed to redetermine this value in deuterium oxide (99.4 atom-percent deuterium, by an extrapolation method. Kash and Woods thought that the low value of the transport mean free path might be a source of error. This paper relates studies of procedures by which (1) boron material would be dissolved in high content deuterium oxide without adding foreign … more
Date: January 5, 1954
Creator: Silverman, L.
open access

The Uranium-Titanium Alloy System

Description: Abstract: "A uranium-titanium constitution diagram is presented. There is complete solid solubility between titanium and gamma uranium above about 2100 F. Only one compound exists in the system. It has a hexagonal structure based on U2Ti. It has a fairly wide range of stability, particularly on the titanium side. Beta-titanium solid solution decomposes eutectoidally into alpha titanium and compound at 1150 F. Eutectoid composition is about 72 atomic per cent titanium. Gamma-uranium solid soluti… more
Date: November 5, 1952
Creator: Udy, Murray C. & Boulger, Francis W.
Back to Top of Screen