UNT Libraries Government Documents Department - 1,037 Matching Results

Search Results

prev Results: 31 - 54 next
open access

Aerodynamic Characteristics of an Airfoil-Forebody Swept Flying-Boat Hull With a Wing and Tail Swept Back 51.3 Degrees at the Leading Edge

Description: Report discussing an investigation of the aerodynamic characteristics of an airfoil-forebody swept flying boat hull with a wing and tail swept back 51.3 degrees at the leading edge. The swept hull's minimum drag coefficient was about the same as the parent model or streamline model. Various combinations of flaps were also utilized.
Date: September 9, 1949
Creator: Naeseth, Rodger L. & MacLeod, Richard G.
Item Type: Refine your search to only Report
open access

Aerodynamic Characteristics of Several NACA Airfoil Sections at Seven Reynolds Numbers From 0.7 X 10(Exp 6) to 9.0 X 10(Exp 6)

Description: Report presenting an investigation of the two-dimensional aerodynamic characteristics of several NACA airfoil sections at four Reynolds numbers. Results regarding the minimum drag, maximum lift, lift-curve slope, and angle of zero lift and pitching moment are provided.
Date: May 27, 1948
Creator: Loftin, Laurence K., Jr. & Poteat, M. Irene
Item Type: Refine your search to only Report
open access

Aerodynamic Characteristics of Three Deep-Stepped Planing-Tail Flying-Boat Hulls

Description: "An investigation was made in the Langley 300 MPH 7- by 10-foot tunnel to determine the aerodynamic characteristics of three deep-stepped planing-tail flying-boat hulls differing only in the amount of step fairing. The hulls were derived by increasing the unfaired step depth of a planing-tail hull of a previous aerodynamic investigation to a depth about 92 percent of the hull beam. Tests were also made on a transverse-stepped hull with an extended afterbody for the purpose of comparison and in … more
Date: March 13, 1947
Creator: Riebe, John M. & Naeseth, Rodger L.
Item Type: Refine your search to only Report
open access

Aerodynamic Characteristics of Two All-Movable Wings Tested in the Presence of a Fuselage at a Mach Number of 1.9

Description: Report presenting testing of half-span models of two wings of different plan form as both all-movable and fixed surfaces in the presence of a half fuselage. All-movable surfaces are being considered for supersonic aircraft as possible angle-of-attack indicators, control surfaces, and all-movable wings. Results regarding the lift characteristics, center of pressure, and drag of the wings are provided.
Date: October 28, 1948
Creator: Conner, D. William
Item Type: Refine your search to only Report
open access

The aerodynamic characteristics throughout the subsonic speed range of a thin, sharp-edged horizontal tail of aspect ratio 4 equipped with a constant-chord elevator

Description: From Introduction: "Recent investigations have indicated several wing plan forms, wing sections, and wing-body-tail combinations suitable for flight at supersonic speeds. One such lifting surface, a thin, sharp-edged without sweep of aspect ratio 4 and taper ratio 0.5, has been the subject of an investigation in the Ames 12-foot pressure wind tunnel. The aim of the investigation was to determine the aerodynamic characteristics of such a wing plan form throughout the range of subsonic Mach numbe… more
Date: June 30, 1949
Creator: Bandettini, Angelo & Reed, Verlin D.
Item Type: Refine your search to only Report
open access

Aerodynamic study of a wing-fuselage combination employing a wing swept back 63 degrees: Aerodynamic characteristics in sideslip of a large-scale model having a 63 degree swept-back vertical tail

Description: Report presenting an investigation to determine the effects of a vertical tail with the leading edge swept back 63 degrees on the aerodynamic characteristics of a wing-fuselage combination with a wing with the leading edge swept back 63 degrees. The aerodynamic characteristics in sideslip with and without the vertical tail are also presented. Results regarding the directional stability, rudder effectiveness, and rudder hinge moments are described.
Date: October 7, 1949
Creator: McCormack, Gerald M.
Item Type: Refine your search to only Report
open access

Aerodynamic study of a wing-fuselage combination employing a wing swept back 63 degrees: Characteristics at a Mach number of 1.53 including effect of small variations of sweep

Description: Measured values of lift, drag, and pitching moment at a Mach number of 1.53 and Reynolds numbers of 0.31, 0.62, and 0.84 million are presented for a wing-fuselage combination having a wing leading-edge sweep angle of 63 degrees, an aspect ratio of 3.42, a taper ratio of 0.25, and an NACA 64A006 section in the stream direction. Data are also presented for sweep angles of 57.0 degrees, 60.4 degrees, 67.0 degrees, and 69.9 degrees. The experimentally determined characteristics were less favorable … more
Date: January 26, 1949
Creator: Madden, Robert T.
Item Type: Refine your search to only Report
open access

Aerodynamic Study of a Wing-Fuselage Combination Employing a Wing Swept Back 63 Degrees: Characteristics for Symmetrical Wing Sections at High Subsonic and Moderate Supersonic Mach Numbers

Description: From Summary: "Results of wind-tunnel tests are presented for a wing with the leading edge swept back 63^o and of symmetrical section in combination with a body at Mach numbers from 0.5 to 0.95 and from 1.09 to 1.51."
Date: July 7, 1949
Creator: Mas, Newton A.
Item Type: Refine your search to only Report
open access

Aerodynamic Study of a Wing-Fuselage Combination Employing a Wing Swept Back 63 Degrees: Characteristics Throughout the Subsonic Speed Range With the Wing Cambered and Twisted for a Uniform Load at a Lift Coefficient of 0.25

Description: Report presenting wind-tunnel testing to determine the independent effects of Mach and Reynolds numbers on the aerodynamic characteristics of a wing-fuselage combination with a wing with the leading edge swept back 63 degrees and with camber and twist. Results regarding the fuselage alone and the effects of camber and twist are also provided.
Date: August 15, 1949
Creator: Jones, J. Lloyd & Demele, Fred A.
Item Type: Refine your search to only Report
open access

Aerodynamic Study of a Wing-Fuselage Combination Employing a Wing Swept Back 63 Degrees: Effects at Subsonic Speeds of a Constant-Chord Elevon on a Wing Cambered and Twisted for a Uniform Load at a Lift Coefficient of 0.25

Description: Report presenting testing of a cambered and twisted wing with constant-chord elevons with a slender fuselage to determine the longitudinal and lateral control from the elevons for a range of Mach numbers. Results regarding lift, drag, pitching-moment, and rolling-moment characteristics for various elevon deflections are provided.
Date: December 5, 1949
Creator: Jones, J. Lloyd & Demele, Fred A.
Item Type: Refine your search to only Report
open access

Aerodynamic study of a wing-fuselage combination employing a wing swept back 63 degrees: Effects of split flaps, elevons, and leading-edge devices at low speed

Description: Report presenting an investigation to evaluate the effects of split flaps, elevons, sharp leading edges, drooped-nose flaps, and extended-nose flaps on the lift, drag, and pitching-moment characteristics at low speed of a wing-fuselage combination with a wing with the leading edge swept back 63 degrees and an aspect ratio of 3.5. Results regarding the plain wing and wing-fuselage combinations, Reynolds number, split flaps, elevons, leading-edge devices, and highest lift coefficient attained bef… more
Date: May 19, 1949
Creator: Hopkins, Edward J.
Item Type: Refine your search to only Report
open access

Aerodynamic study of a wing-fuselage combination employing a wing swept back 63 degrees: Investigation at a Mach number of 1.53 to determine the effects of cambering and twisting the wing for uniform load at a lift coefficient of 0.25

Description: Testing was performed at Mach number 1.53 with a wing-fuselage combination with a wing with 63 degrees leading-edge sweep, an aspect ratio of 3.46, and a taper ratio of 0.25. The wing had an NACA 64A005 thickness distribution parallel to the plane of symmetry and was cambered and twisted. Results regarding the comparison of lift, drag, and pitching-moment characteristics of WF-63c and WF-63, effects of sweep, and effects of Reynolds number are provided.
Date: May 6, 1949
Creator: Madden, Robert T.
Item Type: Refine your search to only Report
open access

Aerodynamic study of a wing-fuselage combination employing a wing swept back 63 degrees: Subsonic Mach and Reynolds number effects on the characteristics of the wing and on the effectiveness of an elevon

Description: Report presenting a wind-tunnel investigation of a semispan model of a wing swept back 63 degrees with an aspect ratio of 3.5 and a taper ratio of 0.25. The tests were conducted to evaluate the effects of Reynolds and Mach number on the aerodynamic characteristics of the wing. Results regarding the characteristics of the wing with the elevon undeflected, effectiveness of the elevon, effects of roughness strips, and effect of model deflection under varying loads are provided.
Date: October 11, 1948
Creator: Reynolds, Robert M. & Smith, Donald W.
Item Type: Refine your search to only Report
open access

Aeronautical Characteristics of a Three-Blade Propeller Having NACA 10-(3)(08)-03 Blades

Description: "Data obtained in tests of a 10-foot diameter, three-blade propeller, having NACA 10-(3)(08)-03 blades, conducted in the Langley 16-foot high-speed tunnel are presented. The propeller performance quantities related by the tests are thrust, torque, efficiency, and advance ratio for various rotational speeds or stream Mach numbers with blade angle as a parameter. Advance Mach numbers varied from 0.12 to 0.64" (p. 1).
Date: October 29, 1948
Creator: Davidson, Robert E.
Item Type: Refine your search to only Report
open access

Air-Flow Behavior Over the Wing of an XP-51 Airplane as Indicated by Wing-Surface Tufts at Subcritical and Supercritical Speeds

Description: Report presenting the air-flow behavior over the wing of an XP-51 airplane including photographs of tufts attached to the wing surface and chordwise pressure distributions. A comparison of tuft studies from flight results are compared with results from wind-tunnel testing. Three types of flow were observed: steady flow, unsteady flow, and break-away flow are provided.
Date: April 24, 1947
Creator: Beeler, De E.
Item Type: Refine your search to only Report
open access

Air-Stream Surveys in the Vicinity of the Tail of a 1/8.33-Scale Powered Model of the Republic XF-12 Airplane

Description: "The XF-12 airplane was designed by Republic Aviation Corporation to provide the Army Air Forces with a high performance, photo reconnaissance aircraft. A series of air-stream surveys were made n the vicinity of the empennage of a 1/8.33-scale powered model of the XF-12 airplane in the Langley 19-foot pressure tunnel. Surveys of the vortical-tail region were made through a range of yaw angles of plus or minus 20 degrees at a high and low angle of attack" (p. 1).
Date: April 8, 1947
Creator: Foster, Gerald V.
Item Type: Refine your search to only Report
open access

Altitude-chamber performance of British Rolls-Royce Nene II engine 1: standard 18.75-inch-diameter jet nozzle

Description: Report presenting an altitude-chamber investigation to determine the altitude performance characteristics of the British Rolls-Royce Nene II turbojet engine with a standard 18.75-inch-diameter jet nozzle. Results regarding the simulated flight performance and generalized performance across other altitude and pressure characteristics are provided.
Date: September 23, 1949
Creator: Barson, Zelmar & Wilsted, H. D.
Item Type: Refine your search to only Report
open access

Altitude-Chamber Performance of British Rolls-Royce Nene II Engine 2: 18.41-Inch-Diameter Jet Nozzle

Description: Report presenting an altitude-chamber investigation to determine the altitude performance characteristics of the British Rolls-Royce Nene II turbojet engine with an 18.41-inch-diameter jet nozzles. Testing occurred at a range of simulated altitudes and ram-pressure ratios. Results regarding the simulated flight performance, generalized performance, and effect of jet-nozzle area on performance are provided.
Date: October 26, 1949
Creator: Armstrong, J. C.; Wilsted, H. D. & Vincent, K. R.
Item Type: Refine your search to only Report
open access

Altitude cooling investigation of the R-2800-21 engine in the P-47G airplane 2: investigation of the engine & airplane variables affecting the cylinder temperature distribution

Description: "The data obtained from cooling tests of an R-2800-21 engine installed in a P-47G airplane were studied to determine which engine and airplane operation variables were mainly responsible for the extremely uneven temperature distribution among the 18 engine cylinders obtained at the medium and high engine-power conditions. The tests consisted of flights at altitudes from 5000 to 35,000 feet for the normal range of engine and airplane operation. The results of the study showed that a flow conditi… more
Date: October 9, 1946
Creator: Pesman, Gerard J. & Kaufman, Samuel J.
Item Type: Refine your search to only Report
Back to Top of Screen