Search Results

open access

Determination of the Six Turbulent Reynolds' Stresses by the Hot Wire Method for Arbitrary Intensity and Geometry with Special Application to Axisymmetric Flow

Description: A relationship is derived the mean square fluctuating current of a hot wire anemometer and the sic turbulent Reynolds stresses in the stream-coordinate system without employing the usual low turbulent intensity approximation. The relatively simple result is a consequence of assuming proportionality between the wire current reading and the perpendicular velocity component instead of the non-linear dependence required by King's law. The assumption is valid for instruments equipped with the proper… more
Date: February 21, 1961
Creator: Wichner, R. P. & Peebles, F. N.
open access

Erosion Experiments of Powder Compacted Uranium Dioxide Under Dynamic Steam Flow (Preliminary Report)

Description: Experiments were carried out to determine the erosion, oxidation and dimensional characteristics of purposely defected fuel elements containing unsintered UO2 powder prepared by the swaging technique. The experiments were conducted in an out-of-reactor loop under superheat conditions of pressure, temperature, flow velocity and steam chemical composition.
Date: March 21, 1961
Creator: Spalaris, C. N.; Comprelli, F. A. & Siegler, M.
open access

HFIR Beryllium Reflector Preliminary Design Report

Description: This report considers the HFIR reflector design criteria and presents a summary of the reflector design. The reflector type chosen as complying best with the established criteria consists of a 3 in. thick removable beryllium annulus utilizing four concentric cylinders with cooling water flowing through the annuli between cylinders, and an outer 9 in. thick permanent beryllium annulus with axial circular coolant holes. Reflector support structures and experimental facilities are described and pr… more
Date: February 21, 1961
Creator: Hilvety, Neil
open access

Servo System for Magnetic Controlled Constant Intensity Flat Top Beam Spill-Out

Description: A uniform intensity flat top spill-out cannot be obtained by manual control for two reasons: 1. The horizontal density of the internal beam of the Cosmotron is far from uniform. As a result, a manually controlled linear motion of the internal beam into a target will result in a non-uniform spill-out intensity. 2. Stability requirements of the Cosmotron magnet voltage are not easily met without feedback because of inherent component stability. The proposed servo system will sense the external be… more
Date: November 21, 1961
Creator: Cottingham, J. G.
Back to Top of Screen