You limited your search to:

  Partner: UNT College of Visual Arts + Design
 Country: United States
 Collection: Texas Fashion Collection
Daytime Dress

Daytime Dress

Date: 1955
Creator: Simpson, Adele
Description: Daytime dress of printed cotton lawn. Street-length of white cotton lawn is printed with stripes of grays and coral is sleeveless, with wide straps and V-neckline in front and back. The bodice is cut so that stripes are diagonal, meeting at center front and back and emphasizing the V-neckline. The narrow waist is slightly dropped, and is defined by a wide set-in decorative belt of the same fabric, with stripes running horizontally, with fabric-wrapped rectangular buckle and ends. The full skirt has stripes running vertically, and is gathered at the waist/bottom of the belt. There is one underskirt of cream faille, and a second of stiff cream netting. The center-back zipper closure extends from single hook-and-eye at neckline to base of belt. Bodice is partly lined with cream faille and has internal boning. There is a white grosgrain ribbon inner waistband with hook-and-eye closures. Designer's label is sewn inside dress, to bodice lining at left side: "Adele Simpson". This dress was a gift of the designer Adele Simpson and her husband Wesley Simpson to the Dallas Museum of Fashion, which later became the Texas Fashion Collection.
Contributing Partner: UNT College of Visual Arts + Design
Gloves

Gloves

Date: 1955~
Creator: Fare, Roger
Description: Pair of gloves of tan suede. The wrist-length gloves are plain, with hand-stitching. Size/Designer Label stamped inside: "7 / Made in France / by / Roger Fare" Retailer Label: "Neiman-Marcus / Made in France"
Contributing Partner: UNT College of Visual Arts + Design
Gloves

Gloves

Date: 1955
Creator: Harang, Lucienne
Description: Evening gloves of midnight blue satin. Dark blue jersey knit at palms and fingers. 6cm slit on back of glove (ending at wrist). Two piece arms of gloves cross to form bow-like feature on back. Elbow length. Designer Label: Lucienne Harang / M / New York
Contributing Partner: UNT College of Visual Arts + Design
Hat

Hat

Date: 1955
Creator: unknown
Description: Hat of dark brown straw. The low, domed crown is of a fine dark brown woven straw, encircled at the base by a band of fine woven reddish brown straw which ties and forms a bow at left side. The medium-width brim is of the dark brown straw, and undulates slightly, higher in front and lower at sides. The hat is lined in reddish brown lace, and has an inner hatband formed of a roll of the lace. At either side, extending from the inner hatband, are two rectangular covered metal clips which help secure the hat to wearer's head. There are no labels or tags in the hat. The hat is accompanied by a single short hatpin with a faux black oval pearl head.
Contributing Partner: UNT College of Visual Arts + Design
Hat

Hat

Date: 1955
Creator: Eller, Hazel
Description: Hat of green straw. The crown is shaped as a cone with a flattened top. The body of the crown is of dark muted green finely woven straw, with the top being an openwork arrangement of strips of the woven straw interwoven to form a latticework or "basket-weave". Around the base of the crown is a wide band of reddish/orange beige grosgrain ribbon overlaid with a narrow band of the same woven straw, with trailing ends at back. Also wrapped around the crown is a fine dark green veiling. The flexible brim is turned down sharply at front, and turned up at back. The hat is unlined, with an inner hatband of the same reddish/orange beige grosgrain ribbon around the inner base of the crown. Designer's label sewn to inner hatband: "Hazel Eller - Custom Made".
Contributing Partner: UNT College of Visual Arts + Design
Hat

Hat

Date: 1955/1959
Creator: Beresford
Description: Hat of black and white neora synthetic straw. Styled as a modified breton hat, the high domed crown is of woven black synthetic straw with white woven synthetic straw accents. The wide, matching brim is set off-center to the crown, wider at front than back, and is rolled up, forming a deep trough around the crown. At the front of the hat, affixed to the visible upturned underside of the brim is a large black plastic button with a black silk tassel extending from the center. The hat is lined in black mesh, with a black grosgrain ribbon inner hatband around the inside base of the crown. Manufacturer's label sewn to inner hatband: "Beresford". United Hatters Cap and Millinery Workers International Union sewn to inner hatband, with number "798738". Accompanied by a single short hatpin with simulated black pearl head.
Contributing Partner: UNT College of Visual Arts + Design
Hat

Hat

Date: 1955
Creator: Victor, Sally
Description: Hat of black wool felt. The tall, cylindrical crown is slanted across the top, higher at front than back. The top of the crown has a flattened section with inner ridge, forming a ring of the felt inside the top. Around the sides of the crown is a very wide light brown band of grosgrain ribbon with bow and trailing ends at back of hat. The wide brim undulates, partly curving up and partly curving down. The hat is lined in black satin, and has an inner hatband of black grosgrain ribbon around the inside base of the crown. Designer's label sewn to inside of crown: "Sally Victor / New York" Retailer's label sewn to inner hatband: "Titche Goettinger Co. / Dallas"
Contributing Partner: UNT College of Visual Arts + Design
Hat

Hat

Date: 1955
Creator: Carnegie, Hattie
Description: Hat of burnt ocher/light brown felt. The hat is styled somewhat like a beret, with low, slightly domed oval crown. The crown is embellished with scattered beading, in a pattern of golden, clear, and purple beads in strings of four or five, and with scattered larger oval cabochon golden yellow "gems". The edge of the crown folds under at front, and folds back out at sides to form slight brim. Around the front half of the hat is attached a veil of black which is formed from two different designs of netting, sewn together. The upper veiling is of wide hexagonal mesh, while the lower veiling is a smaller hexagonal mesh, sewn to the upper with a scrolling brown thread forming loops and curves. The hat is unlined, with a brown grosgrain inner hatband at inside base of crown. Designer's label sewn to inner hatband: "Hattie Carnegie". Retailer's label sewn to inner hatband: "Chez Jeré / Shreveport, LA.". Paper merchandise tag stitched to inner hatband: Obverse: "7112 / DNHH"; Reverse: "Tortuise / 55.00 [marked out] / 27.50"
Contributing Partner: UNT College of Visual Arts + Design
Hat

Hat

Date: 1955
Creator: Daché, Lilly
Description: Hat of dark green felt and multicolored yarns. Formed in the style of a small bonnet, the cylindrical crown is pointed back, and cut flat across top. The front of the crown is overlaid by a band of heavily embroidered/crocheted flowers and ground of various colors of yarn, and scattered shaped beads. This band is bordered by a thick purple yarn. At the front of the hat and extending along the sides are the brim, folded back to form a second wide band of heavily embroidered/crocheted flowers and ground. The hat is unlined, and from the inside can be seen the inner part of the embroidery/crochet. Maker's label sewn inside hat, at back of crown: "Lilly / Daché / Paris New York / 78 East 56th Street, N.Y."
Contributing Partner: UNT College of Visual Arts + Design
Hat

Hat

Date: 1955
Creator: Carnegie, Hattie
Description: Toque-style hat of navy blue felt. The hemispherical crown is of navy blue felt with a folded-up back section from which radiates three large arrow-head shapes (forming a stylized fleur-de-lys seen from above). The shapes are formed of the same material as the hat, but with the reverse side showing, creating different shade/texture. At back of hat are two short trailing ribbons. The hat is unlined, with inner dark blue grosgrain ribbon hatband around inside base of crown. A small stitch mark on the hatband indicates the front of the hat. Designer's label sewn to inner hatband: "Hattie Carnegie". Visible inside the crown is part of a stamped mark from the felt supplier. Accompanied by two short hatpins, the heads covered in the same felt as the hat.
Contributing Partner: UNT College of Visual Arts + Design