UNT College of Engineering - 70 Matching Results

Search Results

Results: 1 - 24 next
open access

3D-printed and injection molded polymer matrix composites with 2D layered materials

Description: This article reports on a study where 2D TMDs (MoS₂ and WS₂) and the 3D allotrope of carbon and graphite were incorporated into acrylonitrile butadiene styrene (ABS) and polyethylene terephthalate glycol (PETG) matrices in order to form polymer matrix composites (PMCs). The multipronged analysis described in this study was motivated by the purpose to fuse together topics of low-cost, additive manufacturing with 2D layered materials, and studying their ensuing mechanical and tribological propert… more
Date: June 26, 2020
Creator: Gamboa, Gerardo; Mazumder, Sangram; Hnatchuk, Nathalie; Catalan Gonzalez, Jorge Alfredo; Cortes, Damaris; Chen, Ikang et al.
Item Type: Refine your search to only Article
open access

Accelerometer-Based Automated Counting of Ten Exercises without Exercise-Specific Training or Tuning

Description: Article presents research that creates an automatic repetition counting system that is flexible enough to measure multiple distinct and repeating movements during physical therapy without being trained on the specific motion.
Date: October 10, 2020
Creator: Zelman, Samuel; Dow, Michael; Tabashum, Thasina; Xiao, Ting & Albert, Mark
Item Type: Refine your search to only Article
open access

Additive friction stir deposition: a deformation processing route to metal additive manufacturing

Description: This article outlines key advantages of additive friction stir deposition, e.g. rendering fully-dense material in the as-printed state with fine, equiaxed microstructures, identifies its niche engineering uses, and points out future research needs in process physics and materials innovation.
Date: November 24, 2020
Creator: Yu, Hang Z. & Mishra, Rajiv
Item Type: Refine your search to only Article
open access

BAM: A Block-Based Bayesian Method for Detecting Genome-Wide Associations with Multiple Diseases

Description: Article proposes a novel Bayesian method, named BAM, for simultaneously partitioning Single Nucleotide Polymorphisms (SNPs) into Linkage Disequilibrium(LD)-blocks and detecting genome-wide multi-locus epistatic interactions that are associated with multiple diseases. Experimental results on the simulated datasets demonstrate that BAM is powerful and efficient.
Date: April 16, 2020
Creator: Guo, Xuan; Wu, Guanying & Xu, Baohua
Item Type: Refine your search to only Article
open access

Cache-Aided General Linear Function Retrieval

Description: This article designs a novel coded caching scheme that outperforms uncoded caching schemes that either use unicast transmissions or let each user recover all files in the library. It extends the scope of the authors’ past work that only considered the class of linear functions that operate element-wise over the files.
Date: December 26, 2020
Creator: Wan, Kai; Sun, Hua; Ji, Mingyue; Tuninetti, Daniela & Caire, Giuseppe
Item Type: Refine your search to only Article
open access

Can a simple topological-constraints-based model predict the initial dissolution rate of borosilicate and aluminosilicate glasses?

Description: This article, as an alternative route to empirical models, shows that a structural descriptor based on the number of topological constraints per atom can be used to predict the initial dissolution rate of aluminosilicate and borosilicate glasses after being parameterized on different families of glasses (specific series of borosilicate glasses). Results show that, provided that corrections are made for high alkali content glasses that dissolve incongruently (preferential release of Na), the mod… more
Date: March 16, 2020
Creator: Gin, Stéphane; Wang, Mengyi; Bisbrouck, Nicolas; Taron, Mélanie; Lu, Xiaonan; Deng, Lu et al.
Item Type: Refine your search to only Article
open access

Characterization of Soft Tooling Photopolymers and Processes for Micromixing Devices with Variable Cross-Section

Description: Article characterizing an assortment of photopolymers and stereolithography processes to produce 3D-printed molds and polydimethylsiloxane (PDMS) castings of micromixing devices. The study shows that 3D-printed soft tooling can provide other benefits such as multiple cross-sections and other potential layouts on a single mold.
Date: October 29, 2020
Creator: Martínez-López, J. Israel; Cervantes, Héctor Andrés Betancourt; Iturbe, Luis Donaldo Cuevas; Vázquez, Elisa; Naula, Edisson A.; Martínez López, Alejandro et al.
Item Type: Refine your search to only Article
open access

Complex Concentrated Alloys (CCAs)—Current Understanding and Future Opportunities

Description: Article providing an overview of the special issue titled Complex Concentrated Alloys (CCAs) - Current Understanding and Future Opportunities. The published papers in this special issue aim to report on the current state of research in complex concentrated alloys (CCAs) as well as compelling future opportunities in wide ranging applications.
Date: September 15, 2020
Creator: Mukherjee, Sundeep
Item Type: Refine your search to only Article
open access

Computational Assessment of Thermokinetics and Associated Microstructural Evolution in Laser Powder Bed Fusion Manufacturing of Ti6Al4V Alloy

Description: This article develops a three-dimensional thermokinetic model based on the finite element method to correlate with the microstructure evolved in additively manufactured Ti6Al4V alloy.
Date: May 5, 2020
Creator: Pantawane, Mangesh V.; Ho, Yee-Hsien; Joshi, Sameehan & Dahotre, Narendra B.
Item Type: Refine your search to only Article
open access

Correlating work hardening with co-activation of stacking fault strengthening and transformation in a high entropy alloy using in-situ neutron diffraction

Description: Article using in-situ neutron diffraction to correlate SF strengthening to work hardening behavior in a low SFE Fe40Mn20Cr15Co20Si5 (at%) high entropy alloy, SFE ~ 6.31 mJ m−2. Cooperative activation of multiple mechanisms was indicated by increases in SF strengthening and γ-f.c.c. → ε-h.c.p. transformation leading to a simultaneous increase in strength and ductility. The present study demonstrates the application of in-situ, neutron or X-ray, diffraction techniques to correlating SF strengthen… more
Date: December 17, 2020
Creator: Frank, M.; Nene, Saurabh S.; Chen, Y.; Gwalani, B.; Kautz, E. J.; Devaraj, A. et al.
Item Type: Refine your search to only Article
open access

Correlation between bonding, vacancy migration mechanisms, and creep in model binary and ternary hcp-Mg solid solutions

Description: Article compares in-plane (IP) and out-of-plane (OOP) vacancy migration mechanisms in binary Mg–X (Ca, Y, and Gd) and ternary Mg–X (Ca, Y, and Gd)–Zn alloys using density functional theory based first principles computations.
Date: October 13, 2020
Creator: Paranjape, Priyanvada; Srinivasan, S. G. & Choudhuri, Deep
Item Type: Refine your search to only Article
open access

Detecting Negation Cues and Scopes in Spanish

Description: Article addresses the processing of negation in Spanish by presenting a machine learning system that processes negation in Spanish and providing a qualitative error analysis aimed at understanding the limitations of the system and showing which negation cues and scopes are straightforward to predict automatically, and which ones are challenging.
Date: May 2020
Creator: Blanco, Eduardo; Jiménez-Zafra, Salud María; Morante, Roser; Martín-Valdivia, María Teresa & Ureña-López, L. Alfonso
Item Type: Refine your search to only Article
open access

Dynamic Shear Deformation of a Precipitation Hardened Al0.7CoCrFeNi Eutectic High-Entropy Alloy Using Hat-Shaped Specimen Geometry

Description: The article reports on the shear deformation of a eutectic structured HEA and effect of precipitation on shear deformation, particularly Al₀.₇CoCrFeNi high-entropy alloy (HEA). A split-Hopkinson pressure bar (SHPB) was used to compress the hat-shaped specimens to study the local dynamic shear response of the alloy. The change in the width of shear bands with respect to precipitation and deformation rates was studied. The precipitation of L1₂ phase did not delay the formation of adiabatic shear… more
Date: April 10, 2020
Creator: Gwalani, Bharat; Wang, Tianhao; Jagetia, Abhinav; Gangireddy, Sindhura; Muskeri, Saideep; Mukherjee, Sundeep et al.
Item Type: Refine your search to only Article
open access

Eficiência de um sistema piloto de dessalinização de água salobra

Description: Article describes study which sought to evaluate the efficiency of pilot water desalination system treating brackish water which was obtained mixing fresh water and seawater up to reach 1,500 mg L-1 of total dissolved solids (TDS) concentration.
Date: March 16, 2020
Creator: Almeida, Juliano Penteado de; Kummer, Ana Carolina Barbosa; Carranza, Gabriel; Campos, Luiza Cintra; Széliga, Marcos Rogério; Acevedo, Miguel F. et al.
Item Type: Refine your search to only Article
open access

Embedded Corrosion Sensing with ZnO-PVDF Sensor Textiles

Description: Article investigating a non-conductive sensor textile as a viable solution for corrosion in underground and submerged steel pipes. The results offer a new option for sub-surface corrosion sensing using low cost, easily fabricated sensor textiles.
Date: May 28, 2020
Creator: Chowdhury, Tonoy; D'Souza, Nandika Anne, 1967-; Ho, Yee-Hsien; Dahotre, Narendra B. & Mahbub, Ifana
Item Type: Refine your search to only Article
Back to Top of Screen