Search Results

open access

Effect of Elevated Temperatures on Properties of Blended Cements with Clinoptilolite

Description: Article investigates the effect of elevated temperature on properties of clinoptilolite blended cements. Clinoptilolite was used at 5 %, 10 %, 15 % and 20 % replacement by weight for Portland cement while sand and water quantities were kept constant in all mix designs. The mortars with 5 % or 10 % cliniptilolite substitution have compressive strength exceeding 42.5 MPa after being subjected to 400 °C and 500 °C.
Date: December 1, 2016
Creator: Beycioglu, Ahmet; Yılmaz Aruntaș, Hüseyin; Gencel, Osman; Hagg Lobland, Haley E.; Şamandar, Ayhan & Brostow, Witold, 1934-
open access

Computational Fluid Dynamics, potential flow and system-based simulations of fully appended free running 5415M in calm water and waves

Description: Article assesses the capabilities of computational fluid dynamics (CFD), potential flow (PF), and system-based (SB) methods for course keeping in calm water and regular and bi-chromatic waves for 5415M as a benchmark test case for AVT-161.
Date: December 27, 2018
Creator: Toxopeus, Serge; Sadat Hosseini, Seyed Hamid; Visonneau, Michel; Guilmineau, Emmanuel; Yen, Tin-Guen; Lin, Woei-Min et al.
open access

A new combinatorial approach to assess the influence of alloy composition on the oxidation behavior and concurrent oxygen-induced phase transformations for binary Ti–xCr alloys at 650 °C

Description: Article describes an experiment in which a combinatorial approach was used to investigate systematically the influence of composition and time on the oxidation of Ti–Cr system.
Date: May 11, 2015
Creator: Samimi, Peyman; Liu, Yue; Ghamarian, Iman; Brice, David A. & Collins, Peter
open access

Development and application of a novel precession electron diffraction technique to quantify and map deformation structures in highly deformed materials—as applied to ultrafine-grained titanium

Description: Article describes precession electron diffraction (PED), which makes possible the very accurate and automated quantitative characterization of technically interesting materials that historically have been difficult to analyze due to their dimensions and/or degree of deformation, including specifically ultrafine-grained metallic structures with high dislocation densities.
Date: August 13, 2014
Creator: Ghamarian, Iman; Liu, Yue; Samimi, Peyman & Collins, Peter
open access

Emerging Trend in the Pharmacotherapy of Osteoarthritis

Description: Article covers the emerging trends of pharmacologic therapies for osteoarthritis (OA) such as traditional OA drugs (acetaminophen, non-steroidal anti-inflammatory drugs (NSAIDs), opioids, serotonin-norepinephrine reuptake inhibitors (SNRIs), intra-articular injections of corticosteroids, and dietary supplements), which are effective in pain relief but not in reversing damage, and are frequently associated with adverse events.
Date: July 2, 2019
Creator: Zhang, Wei; Robertson, William Brett; Zhao, Jinmin; Chen, Weiwei & Xu, Jiake
open access

Effect of surfactants on pressure-sensitivity of carbon nanotube filled cement mortar composites

Description: In this article, the pressure-sensitivity of CNT filled cement mortar composites with different concentrations of MWNT and different surfactants is investigated under repeated loading and impulsive loading, respectively. Experimental results indicate that the response of the electrical resistance of composites with NaDDBS to external force is more stable and sensitive than that of composites with SDS. Therefore, NaDDBS has higher efficiency than SDS for the dispersion of MWNT in cement mortar, … more
Date: November 6, 2014
Creator: Han, Baoguo & Yu, Xun
open access

Seasonal variations of biogeochemical matter export along the Langtang-Narayani river system in central Himalaya

Description: Article describes study in which weathering and suspended matter fluxes of the Langtang Narayani river system in central Nepal Himalaya were investigated at 16 stations for one year, based on monthly water sampling in the lower reaches and bi-monthly in higher elevation areas, to determine temporal variations of weathering fluxes along an elevation profile between 169 and 3989 m asl.
Date: July 7, 2018
Creator: Bhatt, Maya P.; Hartmann, Jens & Acevedo, Miguel F.
open access

Study of the fabrication of AISI 316L microneedle arrays

Description: Article describes a study in which a micro milling process was used to manufacture AISI 316L stainless steel needles arrays with a conical geometry (i.e., a base diameter and height of 1 mm by 1 mm, respectively), and an analysis of tool wear on ball nose micro end milling tools with a diameter of ~200 μm was performed to evaluate the use of lubricant in the manufacture of those conical surfaces.
Date: August 3, 2018
Creator: García-López, Erika; Siller Carrillo, Héctor Rafael & Rodríguez, Ciro A.
open access

Tribological Properties of (EN AW-AlCu4MgSi(A)) Aluminium Alloy Surface Layer After Ball Burnishing

Description: Article presents the tribological properties of (EN AW-AlCu4MgSi(A)) aluminium alloy surface layer after ball burnishing. EN AW-AlCu4MgSi(A) aluminium alloy is widely used as a structural material in aerospace and automotive applications. The authors have subjected it to grinding, polishing and ball burnishing. The authors have performed ball-on-disk tribological tests. We have also determined normalized 3D roughness parameters. High surface smoothness turns out to be obtainable. Favorable effe… more
Date: 2015
Creator: Brostow, Witold, 1934-; Cygan, S.; Czechowski, K.; Kalisz, J.; Laszkiewicz-Łukasik, J. & Łętocha, A.
open access

Exceptional increase in the creep life of magnesium rare-earth alloys due to localized bond stiffening

Description: Article describes study in which researchers attribute the 600% increase in creep life in a prototypical Mg–rare earth (RE)–Zn alloy to multiple mechanisms caused by RE–Zn bonding—stabilization of a large volume fraction of strengthening precipitates on slip planes, increase in vacancy diffusion barrier, reduction in activated cross-slip, and enhancement of covalent character and bond strength around Zn solutes along the c-axis of Mg using atomic-scale characterization and first principles calc… more
Date: December 8, 2017
Creator: Choudhuri, Deep; Srivilliputhur, Srinivasan; Gibson, Mark A.; Zheng, Yufeng; Jaeger, David L.; Fraser, Hamish L. et al.
open access

Comparing the Knotless Tension Band and the Traditional Stainless Steel Wire Tension Band Fixation for Medial Malleolus Fractures: A Retrospective Clinical Study

Description: Article describes investigation which sought to to retrospectively compare this traditional wire technique to an innovative knotless tension band (KTB) technique in order to decrease costly complications.
Date: May 12, 2016
Creator: Downey, Michael W.; Duncan, Kyle; Kosmopoulos, Victor; Motley, Travis A.; Carpenter, Brian B.; Ogunyankin, Fadeke et al.
Back to Top of Screen