UNT College of Engineering - 63 Matching Results

Search Results

Results: 1 - 24 next
open access

Construction and characterization of superhydrophobic wood coatings using one-step technique

Description: Article describes how this study was aiming at enhancing the stain resistance and durability of varnish on wood surfaces, a super hydrophobic solution was created by blending the synthetic ZIF-8/paraffin with Hexadecyltrimethoxysilane at a specified mass ratio. This superhydrophobic mixture was then directly applied onto the wood varnish coating using a one-step method.
Date: November 22, 2023
Creator: Cao, Shuai; Cheng, Shuai; Wang, Pengyu; Ge, Shengbo; Cai, Liping & Cai, Jiabin
Item Type: Refine your search to only Article
open access

Preparation of functional fiber hybrid enhanced high strength and multifunctional protein based adhesive

Description: Article discusses how protein based adhesive is limited by poor mechanical properties and water resistance. This simple and green preparation method provided a new strategy for the production of high-performance, multifunctional and economically effective SM based adhesive.
Date: October 31, 2022
Creator: Zhou, Ying; Zeng, Guodong; Zhang, Fudong; Tang, Zhijie; Luo, Jing; Li, Kuang et al.
Item Type: Refine your search to only Article
open access

Mechanical and Rheological Properties of Bamboo Pulp Fiber Reinforced High Density Polyethylene Composites: Influence of Nano CaCO3 Treatment and Manufacturing Process with Different Pressure Ratings

Description: Article investigating the effect of the relative motion of nano CaCO3 reinforced bamboo pulp fiber (BPF)/HDPE composite components on the mechanical performance.
Date: March 7, 2022
Creator: Wang, Cuicui; Wei, Xin; Smith, Lee M.; Wang, Ge; Zhang, Shuangbao & Cheng, Haitao
Item Type: Refine your search to only Article
open access

Vibrations Evaluation of Functionally Graded Porous Beams in Thermal Surroundings by Generalized Differential Quadrature Method

Description: Article is a study investigating how to obtain the natural frequency of functionally graded porous beams simply supported on an elastic substrate in thermal surroundings by the theory of third-order shear deformation. This article is part of the special issue titled Dynamic Analysis and Vibration Control of Mechanical Structures Coupled with Rotational Systems.
Date: February 23, 2022
Creator: Khakpour, Mahdi; Bazargan-Lari, Yousef; Zahedinejad, Parham & Kazemzadeh-Parsi, Mohammad-Javad
Item Type: Refine your search to only Article
open access

Effects of gradient distribution and aggregate structure of fibers on the flexibility and flexural toughness of natural moso bamboo (Phyllostachys edulis)

Description: Article is a study proposing an original method to quantitatively evaluate the gradient distribution and aggregate structure of fibers on the flexibility and flexural toughness of natural moso (Phyllostachys edulis) bamboo, with a comparison to two other natural woods.
Date: December 24, 2021
Creator: Wei, Xin; Wang, Ge; Smith, Lee M.; Chen, Xiaoyi & Jiang, Huan
Item Type: Refine your search to only Article
open access

Selective H2 sensing using lanthanum doped zinc oxide thin film: A study of temperature dependence H2 sensing effect on carrier reversal activity

Description: Article demonstrates a highly sensitive H₂ gas sensor using a lanthanum doped ZnO (La_ZnO) thin film operated at 300 °C. Pure and lanthanum doped (1–10 at. %) ZnO thin films were successfully synthesized using the sol-gel route.
Date: September 4, 2020
Creator: Zhang, Chen; Ju, Shuai; Zhang, Haifeng & Ghosh, Abhishek
Item Type: Refine your search to only Article
open access

Carbon Capture Utilization for Biopolymer Foam Manufacture: Thermal, Mechanical and Acoustic Performance of PCL/PHBV CO2 Foams

Description: This article uses PCL to blend into PBHV. Both unfoamed and foamed blends are examined. The results provide a pathway to multifunctional performance in foams of high performance biopolymers such as PBHV through harnessing the CO₂ miscibility of PCL.
Date: July 31, 2021
Creator: Oluwabunmi, Kayode E.; Zhao, Weihuan & D'Souza, Nandika Anne, 1967-
Item Type: Refine your search to only Article
open access

A simple design of mechanically robust, recyclable, and biodegradable composite films with high thermal stability and fluorescent properties

Description: This article proposes a strategy for preparing advanced soy protein (SP)-based films by solution casting of SP and hydroxyl and primary amine-containing hyperbranched polysiloxane (HPSA). It offers a simple methodology for the design of mechanically robust, recyclable, and biodegradable composite films, which have potential applications in the fabrication of high-performance, high-transparency, and anti-counterfeiting packaging materials.
Date: March 11, 2021
Creator: Li, Jiongjiong; Jiang, Shuaicheng; Zhou, Ying; Li, Xiaona; Shi, Sheldon & Li, Jianzhang
Item Type: Refine your search to only Article
open access

Electrode and electrolyte configurations for low frequency motion energy harvesting based on reverse electrowetting

Description: This article explores various combinations of electrolyte concentrations, dielectrics, and dielectric thicknesses to generate maximum output power employing REWOD energy harvester with the objective of implementing a fully self-powered wearable sensor.
Date: March 3, 2021
Creator: Adhikari, Pashupati R.; Tasneem, Nishat Tarannum; Reid, Russell C. & Mahbub, Ifana
Item Type: Refine your search to only Article
open access

Computational Fluid Dynamics, potential flow and system-based simulations of fully appended free running 5415M in calm water and waves

Description: Article assesses the capabilities of computational fluid dynamics (CFD), potential flow (PF), and system-based (SB) methods for course keeping in calm water and regular and bi-chromatic waves for 5415M as a benchmark test case for AVT-161.
Date: December 27, 2018
Creator: Toxopeus, Serge; Sadat Hosseini, Seyed Hamid; Visonneau, Michel; Guilmineau, Emmanuel; Yen, Tin-Guen; Lin, Woei-Min et al.
Item Type: Refine your search to only Article
open access

Effect of surfactants on pressure-sensitivity of carbon nanotube filled cement mortar composites

Description: In this article, the pressure-sensitivity of CNT filled cement mortar composites with different concentrations of MWNT and different surfactants is investigated under repeated loading and impulsive loading, respectively. Experimental results indicate that the response of the electrical resistance of composites with NaDDBS to external force is more stable and sensitive than that of composites with SDS. Therefore, NaDDBS has higher efficiency than SDS for the dispersion of MWNT in cement mortar, … more
Date: November 6, 2014
Creator: Han, Baoguo & Yu, Xun
Item Type: Refine your search to only Article
open access

Durable, High Conductivity, Superhydrophobicity Bamboo Timber Surface for Nanoimprint Stamps

Description: This article discusses the fabrication of superhydrophobic bamboo timber by magnetron sputtering and nanoimprint stamps. It was expected that this work could promote the applications of superhydrophobic and conductive bamboo products.
Date: December 6, 2017
Creator: Bao, Wenhui; Liang, Daxin; Zhang, Ming; Jiao, Yue; Wang, Lijuan; Cai, Liping et al.
Item Type: Refine your search to only Article
open access

Fabrication of densified wood via synergy of chemical pretreatment, hot-pressing and post mechanical fixation

Description: Article describes examination of the appearance, color, chemical composition, and physiology and mechanical properties of densified Abies wood before and after densification treatment using a colorimeter, FTIR and mechanical testing machine.
Date: January 30, 2020
Creator: Shi, Jiangtao; Peng, Junyi; Huang, Qiongtao; Cai, Liping & Shi, Sheldon
Item Type: Refine your search to only Article
open access

A Bio-Hygromorph Fabricated with Fish Swim Bladder Hydrogel and Wood Flour-Filled Polylactic Acid Scaffold by 3D Printing

Description: Describes a study where researchers constructed a bio-hygromorph using fish swim bladder hydrogel as the hydrophilic material and wood flour-filled polylactic acid (WPLA) scaffold, which was printed with fused deposition modeling (FDM) 3D printing technology (3DP).
Date: September 7, 2019
Creator: Li, Peng; Pan, Ling; Liu, Dexi; Tao, Yubo & Shi, Sheldon
Item Type: Refine your search to only Article
open access

Reinforcement of Polylactic Acid for Fused Deposition Modeling Process with Nano Particles Treated Bamboo Powder

Description: This article looks at the tensile properties and dynamic mechanical properties of bamboo powder (BP) reinforced polylactic acid (PLA) composite filaments which were treated with nano calcium carbonate (CaCO3), cellulose nanofibers (CNF), and micro-crystalline cellulose (MCC) using impregnation modification technology.
Date: July 4, 2019
Creator: Wang, Cuicui; Smith, Lee M.; Zhang, Wenfu; Li, Mingpeng; Wang, Ge; Shi, Sheldon et al.
Item Type: Refine your search to only Article
open access

Preparation and Characterization of 3D Printed PLA-Based Conductive Composites Using Carbonaceous Fillers by Masterbatch Melting Method

Description: This article highlights a study aimed at improving the conductivity of polylactic acid (PLA)-based composites by incorporating carbonaceous fillers. The composites with the addition of graphene nanoplatelets (rGO) or multi-walled carbon nanotubes (MWCNTs) were fabricated by the masterbatch melting method in order to improve the dispersion of the two kinds of nano-fillers. The results showed that, with the addition of 9 wt % rGO, the volume electrical resistivity of the composite reached the min… more
Date: September 29, 2019
Creator: Guo, Rui; Ren, Zechun; Jia, Xin; Bi, Hongjie; Yang, Haiying; Ji, Tong et al.
Item Type: Refine your search to only Article
Back to Top of Screen