UNT Libraries - 172 Matching Results

Search Results

prev Results: 31 - 54 next
open access

A Comprehensive Modeling Framework for Airborne Mobility

Description: Mobility models serve as the foundation for evaluating and designing airborne networks. Due to the significant impact of mobility models on the network performance, mobility models for airborne networks (ANs) must realistically capture the attributes of ANs. In this paper, I develop a comprehensive modeling framework for ANs. The work I have done is concluded as the following three parts. First, I perform a comprehensive and comparative analysis of AN mobility models and evaluate the models bas… more
Date: December 2013
Creator: Xie, Junfei
open access

Conditional Disclosure of Secrets and Storage over Graphs

Description: In the era of big data, it is essential to implement practical security and privacy measures to ensure the lawful use of data and provide users with trust and assurance. In the dissertation, I address this issue through several key steps. Firstly, I delve into the problem of conditional secret disclosure, representing it using graphs to determine the most efficient approach for storing and disclosing secrets. Secondly, I extend the conditional disclosure of secrets problem from a single secret … more
Date: December 2023
Creator: Li, Zhou
open access

Consensus Building in Sensor Networks and Long Term Planning for the National Airspace System

Description: In this thesis, I present my study on the impact of multi-group network structure on the performance of consensus building strategies, and the preliminary mathematical formulation of the problem on improving the performance of the National Airspace system (NAS) through long-term investment. The first part of the thesis is concerned with a structural approach to the consensus building problem in multi-group distributed sensor networks (DSNs) that can be represented by bipartite graph. Direct i… more
Date: May 2011
Creator: Akula, Naga Venkata Swathik
open access

A Convergence Analysis of LDPC Decoding Based on Eigenvalues

Description: Low-density parity check (LDPC) codes are very popular among error correction codes because of their high-performance capacity. Numerous investigations have been carried out to analyze the performance and simplify the implementation of LDPC codes. Relatively slow convergence of iterative decoding algorithm affects the performance of LDPC codes. Faster convergence can be achieved by reducing the number of iterations during the decoding process. In this thesis, a new approach for faster convergen… more
Date: August 2017
Creator: Kharate, Neha Ashok
open access

The Convolutional Recurrent Structure in Computer Vision Applications

Description: By organically fusing the methods of convolutional neural network (CNN) and recurrent neural network (RNN), this dissertation focuses on the application of optical character recognition and image classification processing. The first part of this dissertation presents an end-to-end novel receipt recognition system for capturing effective information from receipts (CEIR). The main contributions of this research part are divided into three parts. First, this research develops a preprocessing metho… more
Date: December 2021
Creator: Xie, Dong
open access

Data Compression Using a Multi-residue System (Mrs)

Description: This work presents a novel technique for data compression based on multi-residue number systems. The basic theorem is that an under-determined system of congruences could be solved to accomplish data compression for a signal satisfying continuity of its information content and bounded in peak-to -peak amplitude by the product of relatively prime moduli,. This thesis investigates this property and presents quantitative results along with MATLAB codes. Chapter 1 is introductory in nature and Chap… more
Date: August 2012
Creator: Melaedavattil Jaganathan, Jyothy
open access

Data Transmission in Quantized Consensus

Description: In the world of networked system, average consensus is an important dimension of co-ordinate control and cooperation. Since the communication medium is digital, real value cannot be transmitted and we need to perform quantization before data transmission. But for the quantization, error is introduced in exact value and initial average is lost. Based on this limitation, my 16 bit quantization method (sending MSB in 1-4 cycle and MSB+LSB in 5th cycle) reduces error significantly and preserves ini… more
Date: May 2013
Creator: Parvez, Imtiaz

Deep Learning Approach for Sensing Cognitive Radio Channel Status

Description: Cognitive Radio (CR) technology creates the opportunity for unlicensed users to make use of the spectral band provided it does not interfere with any licensed user. It is a prominent tool with spectrum sensing functionality to identify idle channels and let the unlicensed users avail them. Thus, the CR technology provides the consumers access to a very large spectrum, quality spectral utilization, and energy efficiency due to spectral load balancing. However, the full potential of the CR techno… more
Access: Restricted to UNT Community Members. Login required if off-campus.
Date: December 2019
Creator: Gottapu, Srinivasa Kiran
open access

Design and Application of a New Planar Balun

Description: The baluns are the key components in balanced circuits such balanced mixers, frequency multipliers, push–pull amplifiers, and antennas. Most of these applications have become more integrated which demands the baluns to be in compact size and low cost. In this thesis, a new approach about the design of planar balun is presented where the 4-port symmetrical network with one port terminated by open circuit is first analyzed by using even- and odd-mode excitations. With full design equations, the p… more
Date: May 2014
Creator: Mohamed, Younes
open access

Design and Application of Phased Array System

Description: Since its invention, phased array has been extensively applied in both military and civil areas. The applications include target detecting and tracking, space probe communication, broadcasting, human-machine interfaces, and remote sensing. Although the phased array applications show a broad range of potential market, there are some limitations of phased array's development: high cost, complex structure, narrow bandwidth, and high power consumption. Therefore, novel ideas are needed to reduce th… more
Date: August 2013
Creator: Ren, Han
open access

The Design and Implementation of an Effective Vision-Based Leader-Follower Tracking Algorithm Using PI Camera

Description: The thesis implements a vision-based leader-follower tracking algorithm on a ground robot system. One camera is the only sensor installed the leader-follower system and is mounted on the follower. One sphere is the only feature installed on the leader. The camera identifies the sphere in the openCV Library and calculates the relative position between the follower and leader using the area and position of the sphere in the camera frame. A P controller for the follower and a P controller for the … more
Date: August 2016
Creator: Li, Songwei
open access

Design and Implementation of Broad Band and Narrow Band Antennas and Their Applications

Description: The thesis deals with the design and implementation of broadband and narrowband antennas and their applications in practical environment. In this thesis, a new concept for designing the UWB antenna is proposed based on the CRLH metamaterials and this UWB antenna covers a frequency range from 2.45 GHz to 11.6 GHz. Based on the design of the UWB antenna, another antenna is developed that can cover a very wide bandwidth i.e from 0.66 GHz to 120 GHz. This antenna can not only be used for UWB applic… more
Date: August 2011
Creator: Salmani, Zeeshan
open access

Design and Implementation of Communication Platform for Autonomous Decentralized Systems

Description: This thesis deals with the decentralized autonomous system, in which individual nodes acting like peers, communicate and participate in collaborative tasks and decision making processes. An experimental test-bed is created using four Garcia robots. The robots act like peers and interact with each other using user datagram protocol (UDP) messages. Each robot continuously monitors for messages coming from other robots and respond accordingly. Each robot broadcasts its location to all the other ro… more
Date: December 2010
Creator: Gottipati, Naga Sravani
open access

Design fully-integrated dual-band two-stage class-E CMOS PA

Description: In retrospect we can see that from the last century, wireless electronic technology has been in a rapid state of development. With the popularity of wireless communication, the power amplifier demand is rising. In general, magnitude, maximum noise figure, minimum noise figure, efficiency, and output power are important indicators of the amplifier. The IC industry is exploring how to reduce the additional cost and improve the high-frequency performance. Therefore, designing a strong adaptability… more
Date: August 2015
Creator: Zhao, Chao
open access

Design of a Dual Band Gan Pa Utilizing Dual Band Impedance Transformers

Description: This thesis discusses the design, fabrication, and testing of a high efficiency, dual band radio frequency power amplifier. While it is difficult to demonstrate an exact mode of operation for power amplifiers at radio frequencies, based on the characteristics of the transistor itself, the argument can be made that our high efficiency performance is due to an approximation to class E operation. The PA is designed around a CGH40025 transistor manufactured by Cree, Inc, which has developed a very … more
Date: May 2013
Creator: Poe, David R.
open access

Design of a Wearable Flexible Resonant Body Temperature Sensor with Inkjet-Printing

Description: A wearable body temperature sensor would allow for early detection of fever or infection, as well as frequent and accurate hassle-free recording. This thesis explores the design of a body-temperature-sensing device inkjet-printed on a flexible substrate. All structures were first modeled by first-principles, theoretical calculations, and then simulated in HFSS. A variety of planar square inductor geometries were studied before selecting an optimal design. The designs were fabricated using multi… more
Date: May 2020
Creator: Horn, Jacqueline Marie
open access

Design of a Wideband Class J Power Amplifier

Description: A conventional RF power amplifier will convert the low powered radio frequency signals into high powered signals. Along with the expected ability to increase the communication distance, data transfer rates, RF power amplifiers also have many applications which include military radar system, whether forecasting, etc. The main objective of any power amplifier research is to increase the efficiency while maintaining linearity and broadening the frequency of operation. The main motivation for the r… more
Date: May 2013
Creator: Raavi, Srinivasa
open access

Design of Frequency Output Pressure Transducer

Description: Piezoelectricity crystal is used in different area in industry, such as downhole oil, gas industry, and ballistics. The piezoelectricity crystals are able to create electric fields due to mechanical deformation called the direct piezoelectric effect, or create mechanical deformation due to the effect of electric field called the indirect piezoelectric effect. In this thesis, piezoelectricity effect is the core part. There are 4 parts in the frequency output pressure transducer: two crystal osci… more
Date: August 2015
Creator: Ma, Jinge

Design of Low-Power Front End Compressive Sensing Circuitry and Energy Harvesting Transducer Modeling for Self-Powered Motion Sensor

Description: Compressed sensing (CS) is an innovative approach of signal processing that facilitates sub-Nyquist processing of bio-signals, such as a neural signal, electrocardiogram (ECG), and electroencephalogram (EEG). This strategy can be used to lower the data rate to realize ultra-low-power performance, As the count of recording channels increases, data volume is increased resulting in impermissible transmitting power. This thesis work presents the implementation of a CMOS-based front-end design with … more
Date: August 2021
Creator: Kakaraparty, Karthikeya Anil Kumar
open access

Design of Multi Band Microwave Devices Using Coupled Line Transmission Lines

Description: Multi band technology helps in getting multiple operating frequencies using a single microwave device. This thesis presents the design of dual and tri band microwave devices using coupled transmission line structures. Chapter 2 presents the design of a novel dual band transmission line structure using coupled lines. In chapter 3, Design of a dual band branch line coupler and a dual band Wilkinson power divider are proposed using the novel dual band transmission line structure presented in the p… more
Date: May 2015
Creator: Katakam, Sri
open access

Design of Tunable/Reconfigurable and Compact Microwave Devices

Description: With the rapid development of the modern technology, radio frequency and microwave systems are playing more and more important roles. Since the time the first microwave device was invented, they have been leading not only the military but also our daily life to a new era. In order to make the devices have more practical applications, more and more strict requirements have been imposed. For example, good adaptability, reduced cost and shrank size are highly required. In this thesis, three devic… more
Date: May 2014
Creator: Zhou, Mi
open access

Design of Ultra Wideband Low Noise Amplifier for Satellite Communications

Description: This thesis offers the design and improvement of a 2 GHz to 20 GHz low noise amplifier (LNA) utilizing pHEMT technology. The pHEMT technology allows the LNA to generate a boosted signal at a lower noise figure (NF) while consuming less power and achieving smooth overall gain. The design achieves an overall gain (S21) of ≥ 10 dB with an NF ≤ 2 dB while consuming ≤ 30 mA of power while using commercial off-the-shelf (COTS) components.
Date: May 2020
Creator: Webber, Scott
open access

Design of Voltage Boosting Rectifiers for Wireless Power Transfer Systems

Description: This thesis presents a multi-stage rectifier for wireless power transfer in biomedical implant systems. The rectifier is built using Schottky diodes. The design has been simulated in 0.5µm and 130nm CMOS processes. The challenges for a rectifier in a wireless power transfer systems are observed to be the efficiency, output voltage yield, operating frequency range and the minimum input voltage the rectifier can convert. The rectifier outperformed the contemporary works in the mentioned criteria.
Date: May 2019
Creator: Suri, Ramaa Saket
Back to Top of Screen