UNT Libraries - 27,647 Matching Results

Search Results

prev Results: 15691 - 15714 next
open access

Measuring the value of transit access for Dallas County: A hedonic approach.

Description: Advocates of urban light rail transit argue that positive developments around station area(s) should offset the costs of implementing a transit system by creating more livable communities and enhance surrounding residential property values. In some cases, decreased urban landscape aesthetics have been reported. The purpose of this study is to contribute to this debate via an analysis of the impact of the Dallas Area Rapid Transit system on residential property values in Dallas County. By examin… more
Date: August 2007
Creator: Leonard, Christopher
Item Type: Refine your search to only Thesis or Dissertation
open access

Measuring Vital Signs Using Smart Phones

Description: Smart phones today have become increasingly popular with the general public for its diverse abilities like navigation, social networking, and multimedia facilities to name a few. These phones are equipped with high end processors, high resolution cameras, built-in sensors like accelerometer, orientation-sensor, light-sensor, and much more. According to comScore survey, 25.3% of US adults use smart phones in their daily lives. Motivated by the capability of smart phones and their extensive usage… more
Date: December 2010
Creator: Chandrasekaran, Vikram
Item Type: Refine your search to only Thesis or Dissertation
open access

A Mechanical Analysis of the Forward Pass

Description: This study was to mechanically analyze the short forward pass and the long forward pass as used in football by a right-handed passer. The study will determine the basic mechanical movements utilized in executing each pass and present a comparative analysis of the two types of forward passes and illustrate the fundamental differences. It also will present a mechanical description of the forward pass that my be used by a quarterback for the purpose of improving his passing ability or by a coach… more
Date: August 1970
Creator: Heydman, Allan W.
Item Type: Refine your search to only Thesis or Dissertation

Mechanical behavior and performance of injection molded semi-crystalline polymers.

Description: I have used computer simulations to investigate the behavior of polymeric materials at the molecular level. The simulations were performed using the molecular dynamics method with Lennard-Jones potentials defining the interactions between particles in the system. Significant effort was put into the creation of realistic materials on the computer. For this purpose, an algorithm was developed based on the step-wise polymerization process. The resulting computer-generated materials (CGMs) exhibit… more
Access: Restricted to the UNT Community Members at a UNT Libraries Location.
Date: August 2003
Creator: Simoes, Ricardo J. F.
Item Type: Refine your search to only Thesis or Dissertation
open access

Mechanical Characterization of A2 and D2 Tool Steels By Nanoindentation

Description: Nanoindentation technique was used to investigate the surface properties of A2 and D2 tool steel subjected to different heat treatments. the mechanical characteristics of these two easily available tool steels were studied based on microstructural images obtained from SEM, the grain growth after heat treatment using X-ray diffraction method and nanoindentation technique. the investigation showed that a single nanoindentation result can explain how heat treatment influences reliability and failu… more
Date: May 2012
Creator: Okafor, Uzochukwu Chimezie
Item Type: Refine your search to only Thesis or Dissertation

Mechanical Properties of Polymer Modified Mortar

Description: The mechanical properties of the polymer-modified mortar are markedly improved over conventional cement mortar. We utilized recycled ABS in powder form and a polymer latex emulsion, polymer percentage ranges from 0 to 25 percent by polymer/cement ratio were investigated. The mechanical properties investigated were compression strength and adhesion strength. Compression strength effects did not have an impact on adhesion strength. Adhesion strength was calculated with pullout testing apparatus … more
Access: Restricted to UNT Community Members. Login required if off-campus.
Date: August 2002
Creator: Palos, Artemio
Item Type: Refine your search to only Thesis or Dissertation
open access

Mechanically Driven Reconstruction of Materials at Sliding Interfaces to Control Wear

Description: To minimize global carbon emissions, having efficient jet engines and internal combustion engines necessitates utilizing lightweight alloys such as Al, Ti, and Mg-based alloys. Because of their remarkable strength/weight ratio, these alloys have received a lot of attention. Nonetheless, they have very poor tribological behavior, particularly at elevated temperatures beyond 200 °C, when most liquid lubricants begin to fail in lubrication. Over the last two decades, there has been a lot of intere… more
Date: May 2022
Creator: Shirani, Asghar
Item Type: Refine your search to only Thesis or Dissertation
open access

Mechanics and Mechanisms of Creep and Ductile Fracture

Description: The main aim of this dissertation is to relate measurable and hopefully controllable features of a material's microstructure to its observed failure modes to provide a basis for designing better materials. The understanding of creep in materials used at high temperatures is of prime engineering importance. Single crystal Ni-based superalloys used in turbine aerofoils of jet engines are exposed to long dwell times at very high temperatures. In contrast to current theories, creep tests on Ni-base… more
Date: August 2013
Creator: Srivastava, Ankit
Item Type: Refine your search to only Thesis or Dissertation
open access

Mechanism and the Effect of Microwave-Carbon Nanotube Interaction

Description: A series of experimental results about unusual heating of carbon nanotubes by microwaves is analyzed in this dissertation. Two of vibration types, cantilever type (one end is fixed and the other one end is free), the second type is both ends are fixed, have been studied by other people. A third type of forced vibration of carbon nanotubes under an alternating electromagnetic field is examined in this paper. Heating of carbon nanotubes (CNTs) by microwaves is described in terms of nonlinear dyna… more
Date: December 2005
Creator: Ye, Zhou
Item Type: Refine your search to only Thesis or Dissertation
open access

A Mechanism for Facilitating Temporal Reasoning in Discrete Event Simulation

Description: This research establishes the feasibility and potential utility of a software mechanism which employs artificial intelligence techniques to enhance the capabilities of standard discrete event simulators. As background, current methods of integrating artificial intelligence with simulation and relevant research are briefly reviewed.
Date: May 1992
Creator: Legge, Gaynor W.
Item Type: Refine your search to only Thesis or Dissertation
open access

A mechanism for richer representation of videos for children: Calibrating calculated entropy to perceived entropy

Description: This study explores the use of the information theory entropy equation in representations of videos for children. The calculated rates of information in the videos are calibrated to the corresponding perceived rates of information as elicited from the twelve 7 to 10 year old girls who were shown video documents. Entropy measures are calculated for several video elements: set time, set incidence, verbal time, verbal incidence, set constraint, nonverbal dependence, and character appearance. As hy… more
Date: August 2001
Creator: Kearns, Jodi
Item Type: Refine your search to only Thesis or Dissertation
open access

Mechanism of Activation by Autophosphorylation of an S6/H4 Kinase Isolated From Human Placenta

Description: A novel molecular mechanism of autophosphorylation-dependent activation of the ser/thr S6/H4 kinase isolated from human placenta is described. Phosphopeptide mapping of the enzyme was used to determine the rate and extent of site-specific autophosphorylation. These data were correlated to phosphotransferase activity of the protein kinase. The results indicated that a sequential phosphorylation of two sites in the catalytic domain is required for maximum activation. Kinetic analysis determined t… more
Date: December 1994
Creator: Benner, Gretchen E. (Gretchen Evonne)
Item Type: Refine your search to only Thesis or Dissertation
open access

The Mechanism of Formation and Lifetimes of Halogenated Ketenes

Description: The investigation presented here is in two parts: a mechanistic study of the triethylamine dehydrohalogenation of ac-haloacid halides to form halogenated ketenes and a study of steric influence upon ketene lifetimes. The first part of this research deals with the mechanism of the dehydrohalogenation reaction. Two acid halides, isobutyryl chloride and a-chloropropionyl chloride, appeared to represent two mechanistic extremes for this reaction with triethylamine. Isobutyryl chloride reacted with … more
Date: August 1974
Creator: Scherubel, Gary
Item Type: Refine your search to only Thesis or Dissertation
open access

Mechanism of the Adenosine 3',5'-Monophosphate Dependent Protein Kinase

Description: Isotope partitioning experiments were carried out with the adenosine 3',5'-monophosphate-dependent protein kinase catalytic subunit (cAPK) from bovine hearts to obtain information on the order of addition of reactants and the relative rates of reactant release from enzyme compared to the catalytic step(s). A value of 100% trapping for both ErMgATP-[γ-32P] and E:3H-Serpeptide at low Mgf indicates that MgATP and Serpeptide dissociate slowly from the enzyme compared to the catalytic step(s). The K… more
Date: May 1988
Creator: Kong, Cheng-Te
Item Type: Refine your search to only Thesis or Dissertation
open access

Mechanisms Affecting Bench Press Throw Performance while Using a Counter-Balanced Smith Machine

Description: The use of a counter-balance weight system of a Smith machine affects measures of bench press throw performance. Twenty-four men performed bench press throws at 30% of their one-repetition maximum under four different conditions: 1) counter-balance and rebound movement (RC), 2) no counter-balance and rebound movement (RNC), 3) counter-balance and concentric only movement (CC), and 4) no counter-balance and concentric only movement (CNC). Peak power, force, and concentric and eccentric velocitie… more
Date: May 2011
Creator: Buddhadev, Harsh
Item Type: Refine your search to only Thesis or Dissertation
open access

Mechanisms of Cyanide Assimilation in Pseudomonas fluorescens NCIMB 11764

Description: Pseudomonas fluorescens NCIMB 11764 was capable of utilizing cyanide as a sole nitrogen source for growth. Cyanate (OCN") and S-cyanoalanine could also serve as nitrogenous substrates, but do not appear to play a role as intermediates in cyanide metabolism. Growth of this strain on cyanate as the sole nitrogen source led to the induction of an enzyme characterized as a cyanase (EC 3.5.5.3) based on its stoichiometric conversion of cyanate to ammonia, and dependence on bicarbonate for maximal ac… more
Date: August 1992
Creator: Nagappan, Olagappan
Item Type: Refine your search to only Thesis or Dissertation
open access

Mechanisms of Formation and Effects of Transition Metal Oxides in Silicon Nitride on Steel Dry Sliding Contacts

Description: Silicon nitride on steel sliding contacts may provide advantageous tribological properties over traditional self-mated pairs, however the friction and wear behavior at high sliding speeds (>1 m/s) is not well understood. Previous studies at low sliding speeds (< 1 m/s) have found that the wear mechanisms change as a function of the operating parameters, e.g. atmosphere, sliding speed, load, and temperature, due to the formation of transition metal oxides such as Fe2O3 and Fe3O4. This study dete… more
Date: December 2018
Creator: Harris, Michael D.
Item Type: Refine your search to only Thesis or Dissertation
open access

The Mechanisms of Human Glutathione Synthetase and Related Non-Enyzmatic Catalysis

Description: Human glutathione synthetase (hGS) is a homodimeric enzymes that catalyzes the second step in the biological synthesis of glutathione, a critical cellular antioxidant. The enzyme exhibits negative cooperativity towards the γ-glutamylcysteine (γ-GC) substrate. In this type of allosteric regulation, the binding of γ-GC at one active site significantly reduces substrate affinity at a second active site over 40 Å away. The presented work explores protein-protein interactions, substrate binding, and… more
Date: May 2015
Creator: Ingle, Brandall L.
Item Type: Refine your search to only Thesis or Dissertation
open access

The Mechanisms of Methane C–H Activation and Oxy-insertion Via Small Transition Metal Complexes: a DFT Computational Investigation

Description: Our country continues to demand clean renewable energy to meet the growing energy needs of our time. Thus, natural gas, which is 87% by volume of methane, has become a hot topic of discussion because it is a clean burning fuel. However, the transportation of methane is not easy because it is a gas at standard temperature and pressure. The usage of transition metals for the conversion of small organic species like methane into a liquid has been a longstanding practice in stoichiometric chemistry… more
Date: May 2014
Creator: Prince, Bruce M.
Item Type: Refine your search to only Thesis or Dissertation

Mechanisms of Methoxide Ion Substitution and Acid- Catalyzed Z/E Isomerization of N-Methoxyimines

Description: The second order rate constants for nucleophilic substitution by methoxide of (Z)- and (E)-O-methylbenzohydroximoyl fluorides [C6H4C(F)=NOCH3] with various substituents on the phenyl ring [p-OCH3 (1h, 2h), p-CH3 (1g, 2g), p-Cl (1f, 2f), p-H (1e, 2e), (3,5)-bis-CF3 (1i, 2i)] in 90:10 DMSO:MeOH have been measured. A Hammett plot of these rate constants vs σ values gave positive ρ values of 2.95 (Z isomer) and 3.29 (E isomer). Comparison of these rates with methoxide substitution rates for Ometh… more
Access: Restricted to UNT Community Members. Login required if off-campus.
Date: December 2001
Creator: Dolliver, Debra D.
Item Type: Refine your search to only Thesis or Dissertation
open access

Mechanisms of Ordered Gamma Prime Precipitation in Nickel Base Superalloys

Description: Commercial superalloys like Rene88DT are used in high temperature applications like turbine disk in aircraft jet engines due to their excellent high temperature properties, including strength, ductility, improved fracture toughness, fatigue resistance, enhanced creep and oxidation resistance. Typically this alloy's microstructure has L12-ordered precipitates dispersed in disordered face-centered cubic &#947; matrix. A typical industrially relevant heat-treatment often leads to the formation of … more
Date: May 2011
Creator: Singh, Antariksh Rao Pratap
Item Type: Refine your search to only Thesis or Dissertation
Back to Top of Screen