UNT Libraries - 762 Matching Results

Search Results

prev Results: 51 - 100 next
Studies of Solvent Displacement from Solvated Metal Carbonyl Complexes of Chromium, Molybdenum, and Tungsten
Flash photolysis techniques were applied to studies of solvent displacement by Lewis bases (L) from solvated metal carbonyl complexes of Cr, Mo, and W. On the basis of extensive studies of the reaction rate laws, activation parameters , and linear-free-energy-relationships, it was concluded that the mechanisms of solvent displacement reactions depend on the electronic and steric properties of the solvents and L, as well as the identities of the metal atoms. The strengths of solvent-metal bonding interactions, varying from ca. 7 to 16 kcal/mol, and the bonding "modes" of solvents to metals are sensitive to the structures of the solvent molecules and the identities of the metal centers. The results indicate dissociative desolvation pathways for many arene solvents in (solvent)Cr(CO)_5 (solvent = benzene, fluorobenzene, toluene, etc.) complexes, and are consistent with competitive interchange and dissociative pathways for (n-heptane)M(CO)_5. Different types of (arene)-Cr(CO)_5 interactions were suggested for chlorobenzene (CB) vs. fluorobenzene and other non-halogenated arenes, i.e. via σ-halogen-Cr bond formation in the CB solvate vs. π-arene-Cr bond formation through "isolated" double bonds in solvates of the other arenes. The data also indicate the increasing importance of interchange pathways for solvent displacement from the solvates of Mo and W vs. that of Cr.
Analysis of PAH and PCB Emissions from the Combustion of dRDF and the Nondestructive Analysis of Stamp Adhesives
This work includes two unrelated areas of research. The first portion of this work involved combusting densified refuse derived fuel (dRDF) with coal and studying the effect that Ca(0H)2 binder had on reducing polycyclic aromatic hydrocarbon (PAH) and polychlorinated biphenyl (PCB) emissions. The second area of work was directed at developing nondestructive infrared techniques in order to aid in the analysis of postage stamp adhesives. With Americans generating 150-200 million tons a year of Municipal Solid Waste (MSW) and disposing of nearly ninety percent of it in landfills, it is easy to understand why American landfills are approaching capacity. One alternative to landfilling is to process the MSW into RDF. There are technical and environmental problems associated with RDF. This work provides some answers concerning the amount of PAH and PCB emissions generated via the combustion of RDF with coal. It was found that the Ca(OH)2 binder greatly reduced both the PAH and the PCB emissions. In fact, PAH emissions at the ten-percent level were reduced more by using the binder than by the pollution control equipment. If the Ca(0H)2 binder can reduce not only PAH and PCB emissions, but also other noxious emissions, such as acid gases or dioxin, RDF technology could soon be the answer to the current landfill problems. The second portion of this work focused on developing a method to analyze stamp adhesives nondestructively. Using this method, it was fairly easy to differentiate among the three different types of adhesives that have been used by the United States Postal Service: gum arabic, dextrin, and polyvinyl alcohol. Differences caused by changes in chemicals added to the adhesives were also detected. Also, forgeries were detected with as much success, if not more, than by conventional methods. This work also led to the construction of equipment that allows large …
Forensic Science Applications Utilizing Nanomanipulation-Coupled to Nanospray Ionization-Mass Spectrometry for the Analysis of Ultra-Trace Illicit Drugs
Presented in this thesis are two methods that are coupled to the instrumentation for the recovery and analysis of ultra-trace illicit drug residues. The electrostatic dust lifting process is coupled with nanomanipulation-nanospray ionization to retrieve drug particles off of hard surfaces for analysis. For the second method, drug residues from fingerprint impressions are extracted followed by analysis. The methodology of these hyphenated techniques toward forensic science applications is applied as to explore limits of detection, sensitivity, and selectivity of analytes as well as immediacy and efficiency of analysis. The application of nanomanipulation-coupled to nanospray ionization-mass spectrometry toward forensic science based applications is considered as future improvements to trace and ultra-trace analysis.
Thermal and Flash Photolysis Studies of Ligand-Exchange Reactions of Substituted Metal Carbonyl Complexes of Cr and Mo
Thermal and flash photolysis studies of ligand-substitution reactions of cis-(pip)(L)M(CO)_4 by L' (pip = piperidine; L, L' = CO, phosphines, phosphites; M = Cr, Mo) implicate square-pyramidal [(L)M(CO)_4], in which L occupies a coordination site in the equatorial plane, as the reactive species. In chlorobenzene (= CB) solvent, the predominant species formed after flash photolysis and a steady-state intermediate for the thermal reaction is cis—[(CB)(L)M(CO)_4], for which rates of CB-dissociation increase with increasing steric demands of coordinated L. Rates of CB-dissociation from trans-[(CB)(L)M(CO)_4] intermediates, formed after photolysis but not thermally, exhibit no observable dependence on the steric properties of the coordinated L.
The Photolytic Ozonation of Organics in Aqueous Solutions
The aim of the investigation described in this work is to gain a better understanding of the processes involved in the oxidation of organic compounds by photolytic ozonation in a laboratory scale reactor. The results and discussions are presented in Chapter III. This chapter contains four parts. In the first part, mass transfer efficiency and the calculation of the mass transfer coefficient, KLa, as well as the ozone decomposition rate constant, KD, are presented and compared with those obtained by other investigators. The second part deals with the kinetics of the photolysis of 2,2',4,4',6,6'-hexachlorobiphenyl both in purified and natural lake water. Mathematical expressions and a discussion of the possible reaction processes involved are given. Kinetic models of ozonation and photolytic ozonation in purified and natural lake water are developed and discussed in part three. Rate constants are calculated from experimental data and used to predict values of substrate destruction with a mathematical model. The fourth part of this chapter deals with the identification of products from the photolysis, ozonation and photolytic ozonation of 2,2'4,4',6,6'-hexachlorobiphenyl. The products are isolated and identified using combined gas chromatography and mass spectroscopy, and reaction mechanisms are suggested.
Synthesis and Structure of Polynitro- and Polymenthylpolycyclic "Cage" Monomers and Polymers
The objective of this study was to synthesize and characterize new energetic polycyclic "cage" compounds. As part of a program involved in the synthesis of new polynitropolycyclic compounds, 2,6-dinitro-5-methoxy- 7-carbomethoxypentacyclo[5. 3 .0 . 0* • * . CP • i ° . 0* •8]decane has been synthesized. This is a model system which can be used to study (1) the effect of nitro substitution on the photolability of carbon-carbon double bonds and (2) to develop methods for avoiding Haller-Bauer cleavage in cage /3-keto esters when synthesizing polynitro-substituted cage compounds.
Syntheses, X-ray Diffraction Structures, and Kinetics on New Formamidinate-Substituted Triosmium Clusters
The reaction between the formamidine ligand PriN=CHNHPri and the activated cluster Os3(CO)10(MeCN)2 has been studied. A rapid reaction is observed at room temperature, yielding the hydride clusters HOs3(CO)9[μ-OCNPriC(H)NPri] and HOs3(CO)10[μ-NPriC(H)NPri] as the principal products. The spectroscopic data and X-ray diffraction structures of those formamidinate-substituted clusters will be present. The thermal reactivity of the clusters has been investigated, with the face-capped cluster HOs3(CO)9[μ-NPriC(H)NPri] found as the sole observable product. The relationship between these three clusters has been established by kinetic studies, the results of which will be discussed.
The Nature of Intermediates Produced Through Ligand-Substitution Reactions of Octahedral Metal Carbonyls
Pulsed laser time-resolved ligand-substitution photochemistry for (DTO)W(CO)4, (DTN)W(CO)4, and (NP)Mo(CO)4 (DTO = 2,2,7,7-tetramethyl-3,6-diathiaoctane; DTN = 2,2,8,8- tetramethyl-3,7-diathianonane; NP = l-diethylamino-2- diphenylphosphinoethane) proceeds via initial fission of the W-S and Mo-P bonds, affording Cs and C4v five-coordinate intermediates for DTN and NP but largely Cs for DTO. The rates of reaction of these intermediates, via chelate ring closure and competitive bimolecular interaction with Lewis bases (= L, alkylphosphines and alkyl phosphites) for the Cs intermediates and via bimolecular interaction of L with the C4v intermediates, together with activation parameters for these processes have been determined. The rates of interactions at the Cs intermediates are significantly faster than at the C4v intermediates.
Reactions of Chloroketenes with Ketene Acetals
The first objective of this investigation was to conduct a systematic study into the reactions of chloroketenes with ketene acetals. The second objective was to explore the synthetic utility of these reaction products and offer a rational explanation for these reaction products.
Pressure Effects on Electric Field Spectra of Molecular Rydberg States
Electric field studies, electrochromism, were used to obtain excited-state data for analogous divalent sulfur compounds. The sulfides investigated were dimethyl sulfide and small cyclic sulfides including the three to six member ring compounds. The excited-state dipole moments and polarizabilities are reported for the first s, p, and d Rydberg absorption bands which occur in the near vacuum ultraviolet region from 230 to 170 nm. The excited-state data are interpreted in terms of the particular excited-state (s, p, or d) for the molecules and the bending differences due to the presence of the ring and the number of atoms in the ring. The next section describes the use of electrochromism to investigate the pressure effect of argon, carbon tetrafluoride and sulfur hexafluoride on the spectra for molecular Rydberg states.
Synthesis and Reactions of Some N-Nitrosamines
Nucleophiles react with the α-acetoxy derivative of α-hydroxybenzylbenzylnitrosamine at the carbonyl carbon of the acetoxy moiety followed by fragmentation to the very same intermediates formed by oxidative metabolism. Since α-acetoxybenzylbenzylnitrosamine has been shown to be able to acylate nucleophiles and since the nucleic acids are nucleophiles, then it is possible that this compound may cause mutations by an acylation pathway instead of or in addition to the more common alkylation pathway. The data in Part I of this dissertation should be considered in any further biological investigations of N,N-dialkylnitrosamine induced mutagenesis or carcinogenesis. The study of the synthesis, reactions, mutagenicity, and the possible correlation to compound liposolubility of cyclic N-nitrosamines was also investigated.
Studies on Human Plasma Lecithin:Cholesterol Acyltransferase: Physical and Chemical Characterization and Coupled Spectrophotometric Enzyme Assay
The physico-chemical properties of lecithin:cholesterol acyltransferase were investigated. The amino acid composition analysis showed a relatively high content of glutamic acid, aspartic acid, glycine and leucine. The spectrophotometric titration of phenolic groups in the enzyme showed a large increase in absorbance at 295 nm with an apparent pK of about 12.0. The largest change in molar ellipticity at 222 nm was also observed above pH 11. Circular dichroism studies revealed that human lecithin:cholesterol acyltransferase has a relatively high content of β-pleated sheet structure (48%) with 20% α-helix, and 32% remaining structure. Human lecithin:cholesterol acyltransferase has a high extinction coefficient at neutral pH. Microsequencing of the amino terminal residues of the enzyme revealed a hydrophobic character. Inactivation of lecithin:cholesterol acyltransferase activity was observed using diisopropylfluorophosphate with a stoichiometry of 1 mole of diisopropylphosphate incorporated per mole of enzyme. This suggests the involvement of a serine residue in the active site of the enzyme, possibly for the formation of an acyl-intermediate. A new quicker assay method for lecithin:cholesterol acyltransferase was developed. This assay involved coupling reaction with acyl CoA synthetase, ΡΡᵢ-dependent phosphofructokinase, aldolase, triosephosphate isomerase and α-glycerol-3-phosphate dehydrogenase monitoring a change in the absorbance or fluorescence intensity due to the oxidation of NADH. The activity of each coupling enzyme was accurately determined to establish the optimum assay condition for lecithin:cholesterol acyltransferase. The coupled enzyme assay for lecithin:cholesterol acyltransferase by spectrofluorometry showed a significant change in relative fluorescence intensity whereas a UV absorption spectroscopy method showed no significant absorbance change for the initial rate of lecithin:cholesterol acyltransferase reaction.
Soft Landing Ion Mobility Mass Spectrometry: History, Instrumentation and an Ambient Pressure Application
Preparative mass spectrometry is an important method for the synthesis of new materials. Recently, soft landing mass spectrometry has been used to land ions on surfaces to coat or otherwise alter them. Commercial soft landing instruments do not yet exist, and the physical phenomenon of soft landing has not yet been fully described. For future ion mobility soft landing research, the theory of ion mobility, ion optics and soft landing is discussed, and 2 soft landing instruments have been built and described, along with proof of concept experiments for both instruments. Simulations of the process of ion mobility and ion optics for use in these instruments, as well as some preliminary results for the optics are included. Surfaces described include copper on mica and iron on silicon. Self assembly of soft landed ions is observed on the surfaces. The instruments constructed will be useful for future soft landing research, and soft landing can be used for future materials research with special attention focused on the self-assembly of the landed ions.
The Quantitative Determination of Glass in Slag and Fly Ash by Infrared Spectroscopy
The present study was aimed at developing a new inexpensive and accurate analytical method for determining the glass content of slag and fly ash. Infrared absorption spectroscopy using an internal standard proved to be the method of choice. Both synthetic and commercial slags and fly ashes were investigated.
Silenes and Silenoids in the Chemistry of Cyclopentadienylsilanes
Evidence is presented that apparent silene products obtained from the metalation of cyclopentadienyldimethyl - chlorosilane either with tert-butyl1ithium or with methylenetriphenylphosphorane actually arise from the metalated starting material, a silenoid, rather than from a silafulvene intermediate. Trimethylmethoxysi1ane is shown to be an effective trap for dimethylsilafulvene. A new dimethylsilafulvene precursor, bis(dimethylmethoxysi1yl) cyclopentadiene, which gives high yields of dimethyldimethoxysi1ane and the silafulvene at temperatures as low as 240°C is reported.
Spectroscopic and Physical Effects of Highly Polar Groups
Since the development of the understanding that the electron distribution within a molecule is chiefly responsible for its properties and behavior, factors influencing this charge distribution have been of interest to scientists. The chemical reactivity of a molecule, the physical properties, and to a large extent, structure and geometry, are all functions of the electron distribution. This study examines the issue of electronic structure from two points of view, each of them focussing on a specific component within the molecules studied. In the present work, the effects of the highly polar carbonyl group on spectroscopic parameters and physical behavior are investigated. An additional area of study is the effect of fluorine substitution on the energy levels of some halogenated ethylenes. The specific parameters examined are the ionization potentials, the absorption frequencies, and the energies of a class of excited states known as molecular Rydberg states. It was during the study of these halogenated ethylenes that the observations leading to the carbonyl compound investigations were made, so that the two areas examined are connected both experimentally and chemically.
Investigations of Thermochemistry and the Kinetics of H Atom Radical Reactions
The thermochemistry of several species, and the kinetics of various H atom radical reactions relevant to atmospheric and combustion chemistry were investigated using ab initio theoretical techniques and the flash photolysis / resonance fluorescence technique. Using ab initio quantum mechanical calculations up to the G3 level of theory, the C-H bond strengths of several alkanes were calculated. The bond strengths were calculated using two working reactions. From the results, it is apparent that the bond strengths decrease as methyl groups are added to the central carbon. The results are in good agreement with recent experimental halogenation kinetic studies. Hydrogen bond strengths with sulfur and oxygen were studied via CCSD(T) theory, together with extrapolation to the complete basis set limit. The results for the bond dissociation energies (ground state at 0 K, units: kJ mol-1) are: S-H = 349.9, S-D = 354.7, HS-H = 376.2, DS-D = 383.4, and HO-H = 492.6. These data compare well with experimental literature. The rate constants for the isotopic reactions of H + H2S, D + H2S, H + D2S, and D + D2S are studied at the QCISD(T)/6-311+G(3df,2p) level of theory. The contributions of the exchange reaction versus abstraction are examined through transition state theory. The energy of NS was computed via CCSD(T) theory, together with extrapolation to the complete basis set limit. The results were employed with three working reactions to find ΔfH0(NS) = 277.3 ± 2 kJ mol-1 and ΔfH298(NS) = 278.0 ± 2 kJ mol-1. This thermochemistry is consistent with, but much more precise than, earlier literature values. A kinetic study of the reaction of H + CH2CCl2 was conducted over the temperature range of 298 - 680 K. The reaction was found to be pressure dependent and results of the rate constants and their interpretation via unimolecular rate theory are …
Synthesis of Crown Ether/Ammonium Salt for Electron Transfer Study
The theoretical model of Beratan and Onuchic predicts a large attenuation of ET rates through hydrogen bonds; however, the effect of individual hydrogen bond on electron transfer reaction has not been systematically studied. The organic complexes in this study are a series of crown ether/ammonium salt, which incorporate a redox partner on each component of the complex. The dimethoxynaphthalene redox donor was attached to the crown ether and a series of ammonium salts was synthesized which bear substituted quinone and naphthoquinone acceptor. The complexes characterization and preliminary electron transfer rate measurement were completed with UV/Vis and steady-state emission spectroscopy.
Model Development for the Catalytic Calcination of Calcium Carbonate
Lime is one of the largest manufactured chemicals in the United States. The conversion of calcium carbonate into calcium oxide is an endothermic reaction and requires approximately two to four times the theoretical quantity of energy predicted from thermodynamic analysis. With the skyrocketing costs of fossil fuels, how to decrease the energy consumption in the calcination process has become a very important problem in the lime industry. In the present study, many chemicals including lithium carbonate, sodium carbonate, potassium carbonate, lithium chloride, magnesium chloride, and calcium chloride have been proved to be the catalysts to enhance the calcination rate of calcium carbonate. By mixing these chemicals with pure calcium carbonate, these additives can increase the calcination rate of calcium carbonate at constant temperatures; also, they can complete the calcination of calcium carbonate at relatively low temperatures. As a result, the energy required for the calcination of calcium carbonate can be decreased. The present study has aimed at developing a physical model, which is called the extended shell model, to explain the results of the catalytic calcination. In this model, heat transfer and mass transfer are two main factors used to predict the calcination rate of calcium carbonate. By using the extended shell model, not only the catalytic calcination but also the inhibitive calcination of calcium carbonate have been explained.
Intramolecular 2+2 Cycloadditions of Ketenes
The objective of this study was to explore intramolecular ketene cycloadditions with the anticipated results of developing new synthetic methodology for the synthesis of polycyclic compounds difficult to obtain by other procedures. (o-Alkenylphenoxy)ketenes were initially selected for this study because these ketenes provided a favorable proximity for the intramolecular [2+2] cycloaddition reactions. The difunctional precursors, (o-alkenylphenoxy)- acetic acids, were readily prepared from o-alkenylphenols and ∝-halocarboxylic acids and were converted to the corresponding acid chlorides by reaction with oxalyl chloride. The acid chlorides were dehydrochlorinated to the corresponding (o-alkenylphenoxy)ketenes by treatment with triethylamine. The ketenes undergo a facile intramolecular [2+2] cycloaddition to give polycyclic eye 1obutanones. The (o-vinylphenoxy)ketenes are clearly more reactive than the (o-allylphenoxy)ketenes and provide much better yields of the cycloaddition products because of electronic effects in the transition state in the cycloaddition process. The intramolecular [2+2] cycloadditions of keteniminium salts were included in this study as a more electrophilic alternative to ketenes that will react with less nucleophilic carbon-carbon double bonds. However, the use of keteniminium salts instead of ketenes in Intramolecular cycloadditions does have some limitations. The synthesis of benzofurans via the intramolecular [2+2] cycloadditions of (o-acylphenoxy)ketenes was accomplished. The initially formed ß-lactone cycloaddition products spontaneously underwent decarboxylation to the benzofurans. The aromaticity of the benzofurans is apparently a very strong driving force for the cycloaddition. During the course of this study, two new synthetic methods were discovered which in many instances represent a significant Improvement over existing methods. The Wittig Reactions of ketoacids without protecting the carboxyl groups provide a reliable source of the precursor unsaturated acids needed for intramolecular ketene-olefin cycloadditions. Also, the one-pot preparation of intramolecular ketene cycloaddition products from the carboxylic acid via the tosylate represents a new synthetic method. This procedure eliminates the acid halide preparation, isolation and purification step, thereby significantly …
Pyrolysis Capillary Chromatography of Refuse-Derived Fuel and Aquatic Fulvic Acids
Pyrolysis-capillary gas chromatography combined with FID, ECD and MS detection were used to characterize refuse-derived fuel and aquatic fulvic acids. Different pyrolysis methods and programs were evaluated. Pyrolysis temperatures of 700-800°C produced the strongest signal for organics present in RDF and fulvic acid. Cellulose and fatty acids pyrolyzates were identifiable by GC-MS following preparative pyrolysis fractionation. At organic chloride content of 0.023%, only three halogenated compounds were detected in the GC-MS of the fractions. None of the priority pollutants were detected at lower detection limit of 0.72 to 24 mg/ kg RDF. Selective solvent extraction improves the reproduciblities of the technique and allows the detection of polymeric structures. Pyrograms of polyvinyl chloride and regular typing paper showed some common peaks that are present in the RDF pyrogram. About 65% of the peaks in the RDF pyrogram might be of paper origin. The organic chloride content of the RDF was evaluated by ion chromatography of the trapped pyrolyzates in 2% NaOH trap and it was found to be 221 mg Cl/ kg dry RDF. Pyrolysis conditions and temperature programs for FA were systematically evaluated. Samples included purified FA, methylated FA and HPLC separated fractions. Characteristic pyrograms were developed. Profiles of benzene, toluene, phenol, m-cresol and biphenyl from FA were evaluated. The production of phenol was the largest at 800°C, at concentration of 1.61 mg per gram of FA pyrolyzed. The profiles of benzene and toluene followed the same pathways. Both pyrolyzates had at least two precursors. HPLC fractions of FA showed some regular retention patterns characteristic of polymeric material. DL-proline, seriene and vanillic acid pyrograms showed some peaks with the same retention times as those in FA pyrogram under the same conditions. A reproducibility of 6% relative standard deviation was achieved in the pyrolysis of RDF and 0.91% in the case …
Syntheses of Highly Strained Energetic Molecules and Development of New Synthetic Methodology
The objective of this study was to synthesize new energetic, strained, saturated polycyclic compounds. For this purpose, new methodology has been developed, as follows: (i) Ketenes have been generated in situ via treatment of aldo-, keto- or alkenoic acid with either toluenesulfonyl chloride or 2-chloro-1-methylpyridfniurn iodide (Mulkaiyama's reagent). The reactive intermediates thereby generated have been found to undergo intramolecular [2+2] cycloaddition reactions in these systems.
Methods Development for Simultaneous Determination of Anions and Cations by Ion Chromatography
The problem with which this research is concerned is the determination of inorganic anions and cations with single injection ion chromatography. Direct detection of the separated analyte ions occurs after the analyte ions have passed through ion-exchange resins where they are separated according to their affinity for the ion-exchange resin active sites. The techniques involve the use of essentially a non-suppressed ion chromatographic system followed by a suppressed ion chromatographic system. With this system it is possible to accomplish both qualitative and quantitative determinations.
Sites of Reactivity During Ligand-Exchange Reactions in Octahedral Group VIB Metal Carbonyls
The site of initial metal-carbonyl bond-breaking during ligand-exchange reactions in a series of octahedral metal carbonyls of the type (L2)M(CO)4 (M = Cr, Mo, W; L2 = diphos, phen, dipy) has been determined employing infrared spectroscopy and Fourier transform nuclear magnetic resonance spectroscopy. The results of this study reveal, for all metal carbonyl complexes of the type mentioned above, that loss of CO occurs exclusively at an axial position (cis to the bidentate ligand, I^)• The dynamic nature of the five-coordinate intermediates, such as (diphos)Mo(CO)3, (phen)M(CO)3 (M = Cr, Mo, W), and (dipy)Cr(CO)3, which are generated in solution upon CO dissociation, is reported and discussed. The results of this investigation confirm that these intermediates are fluxional on the time scale of CO-exchange process. A mechanism which describes the site of initial metal-carbonyl bond-breaking and the fluxionality of the five-coordinate intermediate during ligand-exchange reactions in the complexes (L2)M(CO)4 is proposed. A kinetic study of reactions of W(CO)6 with pseudo-halide anions (NCS-, NCO-, CN-) has been initiated. The results indicate that these reactions proceed via a bimolecular path, which involves initial attack of the pseudo-halide anion at a carbonyl carbon of W(CO)6,
The Analysis of PCDD and PCDF Emissions from the Cofiring of Densified Refuse Derived Fuel and Coal
The United States leads the world in per capita production of Municipal Solid Waste (MSW), generating approximately 200 million tons per year. By 2000 A.D. the US EPA predicts a 20% rise in these numbers. Currently the major strategies of MSW disposal are (i) landfill and (ii) incineration. The amount of landfill space in the US is on a rapid decline. There are -10,000 landfill sites in the country, of which only 65-70% are still in use. The Office of Technology Assessment (OTA) predicts an 80% landfill closure rate in the next 20 years. The development of a viable energy resource from MSW, in the form of densified Refuse Derived Fuel (dRDF), provides solutions to the problems of MSW generation and fossil fuel depletions. Every 2 tons of MSW yields approximately 1 ton of dRDF. Each ton of dRDF has an energy equivalent of more than two barrels of oil. At current production rates the US is "throwing away" over 200,000,000 barrels of oil a year. In order to be considered a truly viable product dRDF must be extensively studied; in terms of it's cost of production, it's combustion properties, and it's potential for environmental pollution. In 1987 a research team from the University of North Texas, in conjunction with the US DOE and Argonne National Laboratory (ANL), cofired over 550 tons of dRDF and bdRDF with a high sulfur Kentucky coal in a boiler at ANL. This work examines the emission rates of polychlorinated dioxins (PCDDs) and furans (PCDFs) during the combustion of the dRDF, bdRDF, and coal. Even at levels of 50% by Btu content of dRDF in the fuel feedstock, emission rates of PCDDs and PCDFs were below detection limits. The dRDF is shown to be an environmentally acceptable product, which could help resolve one of the …
Synthetic Applications of Ketene Cycloadditions: Natural and Novel Pyrethroid Insecticides
A new synthetic route to natural and novel pyrethroid acids was developed utilizing ketene cycloaddition which is a significant improvement over existing syntheses. The newly synthesized pyrethroid acids were converted to pyrethroid esters and used to study structure-activity relationships. The cycloaddition of dichloroketene with 2,5-dimethyl-2,4-hexadiene yields (2+2) cycloaddition products, 2,2-dichlorocyclobutanones. The reductive removal of one chlorine atom from these cycloaddition products gave monochlorocyclobutanones which underwent a Favorskii-type ring contraction to yield cis- and trans-chrysanthemic acids. 4-Methyl-1,3-pentadiene was also used as a precursor in this synthetic scheme to yield an analogue of the chrysanthemic acid. These results are consistent with a concerted cycloaddition process involving a dipolar transition state. The zinc reduction is not a regiospecific reaction which accounts for the two regioisomers of the monochlorocyclobutanones. The Favorskii-type ring contraction is a regiospecific reaction. A variety of different bicyclo(3.1.0)alkenecarboxylates and bicyclo(4.1.0)heptenecarboxylates were synthesized from alkylcyclopentadiene and fulvene derivatives. These new bicyclo pyrethroid acids are structurally similar to the natural chrysanthemic acid but are rigid and locked in a single conformation which is likely the least stable conformer of the natural acid. The acids were converted to pyrethroid esters and tested against the housefly and cockroach. The test results indicate that the bicyclo pyrethroids synthesized are not as active as the natural pyrethroid. Apparently, these bicyclo pyrethroids with structures similar to the less stable conformer of the natural pyrethroids are of little consequence as it binds to the target site in the insect. In an effort to learn more about the conformational requirements of the pyrethroid acid, a new bicyclo-spiro pyrethroid system with a structure similar to the most stable conformation of the natural pyrethroid was designed and synthesized. These bicyclo-spiro pyrethroids were derived from a new isopropylidenecyclobutane derivatives as a starting compound instead of a conjugated diene. The test results of …
Synthesis and Characterization of Copper(II) Complexes
A series of dihydroxy bridged copper(II) complexes of the type [(L)Cu(OH)₂Cu(L)]x₂ * nH₂0, where L is 2,2'-bipyridine, 4,4'-dimethyl-2,2'-bipyridine or 1,10-phenanthroline, x is a counter ion, and n is the number of water molecules, was synthesized. In the case of monohydroxy bridged copper(II) complexes, we have found a new method of synthesis for [ (L)₂Cu(OH)Cu(L)₂ ] (ClO₄)₃, where L is 2,2'-bipyridine or 1,10-phenanthroline. We have synthesized five new monohydroxy bridged copper(II) complexes, thus increasing the number of monohydroxy bridged copper(II) complexes to nine. All complexes have been characterized by infrared spectroscopy, UV-visible spectroscopy, magnetic moments, and elemental analysis. The electron spin resonance results establish that the fulvic acids contain organic free radicals as an internal part of their molecular structure. The concentration of unpaired electrons will increase by increasing the pH. The unpaired electron in fulvic acid interacts with the unpaired electron on copper(II) through the Π system, and this will decrease the spin concentration of fulvic acid complexed with copper(II). The displacement of titration curve from a free ligand (fructose-1,6-diphosphate, ribulose-1,5-diphosphate, phospherine, phosphothreonine, and 3-phosphoglyceric acid, to a ligand plus copper(II) (1:1 ratio) shows there is a strong interaction between copper(II) and the corresponding ligand. All complexes absorb UV-visible at 250-300 nm. The absorption intensity changes as a function of pH. Copper (II) forms a complex with fructose-1,6-diphosphate, ribulose-1,5-diphosphate, phosphoserine, phosphothreonine, and 3-phosphoglyceric acid by the ratio of 1:3, 1:3, 1:1, 1:1, and 1:2, respectively.
Catalytic Calcination of Calcium Carbonate
The calcination of calcium carbonate in a cement or a lime kiln uses approximately two to four times the theoretical quantity of energy predicted from thermodynamic calculation depending upon the type of the kiln used (1.4 x 10^6 Btu/ton theoretical to 6 x 10^6 Btu/ton actual). The objective of this research was to attempt to reduce the energy required for the calcination by 1. decreasing the calcination temperature of calcium carbonate, and/or 2. increasing the rate of calcination at a specific temperature. Assuming a catalytic enhancement of 20 percent in the industrial applications, an energy savings of 300 million dollars annually in the United States could be reached in the cement and lime industries. Three classes of compounds to date have shown a positive catalytic effect on the calcination of calcium carbonate. These include alkali halides, phospho- and silico-molybdate complexes, and the fused carbonates system.
Kinetics and Mechanism of Reactions of Disubstituted Octahedral Metal Carbonyls with Phosphorus Donor Ligands and Germanium Tetraiodide
The kinetics and mechanism of the reactions of (tmpa)W-(CO)^ and (tmen)W(CO)^ (tmpa = N,N,N',N'-tetramethy1-1,3-diaminopropane and tmen = N,N,N1,N1-tetramethylethylenediamine) with four phosphorus donor ligands (triisopropyl phosphite, triphenyl phosphite, triphenylphosphine and "constrained phosphite", 4-methyl-2,6,7-trioxa-l-phosphabicylo[2.2.2]octane) in xylene have been investigated in detail. These reactions were found to take place by the ring-opening of the bidentate ligand in a reversible step which leads to the formation of a five-coordinate intermediate of the type [(h^-tmpa)W(CO)or [(h^-tmen)W(CO). The intermediate then reacts with one molecule of phosphorus ligand, L, to form a six-coordinate intermediate, which can either expel the bidentate ligand and react with another molecule of L leading to the formation of a new disubstituted tungsten tetracarbonyl or go through a ring-reclosure step to form a seven-coordinate activated com-2 2plex or intermediate of the type [(h -tmpa)W(CO)^(L)] or [(h - tmen)W(CO)^(L)] which then regenerates the substrate through the expulstion of the L molecule. This mechanism is consistent with the observed rate behavior in these systems. For the reaction of (tmpa)W(CO)^ with the "constrained phosphite", an intermediate of the type [(h1-tmpa)W(CO)4P(OCH2)3CCH3] was isolated and identified.
Purification and Studies of Mammalian Glyoxalase Enzymes
The glyoxalase system, which has been known since 1913, is widely distributed in nature. The system consists of two enzymes, glyoxalase I and glyoxalase II. Methylglyoxal is very unstable and undergoes oxidation and polymerization reactions. One of the purposes of this study was to find a simple, convenient and reproducible method of methylglyoxal preparation. Another objective was the purification of both glyoxalase enzymes employing affinity chromatography as a major step. The purified enzymes were to be characterized by chemical, physical and kinetic properties as an approach to the understanding of the biological function of the system.
Methods Development for Ion Chromatography
Ion chromatography (IC) as developed by Small et. al. in 1975 has become an efficient and reliable analytical technique for simultaneous analysis of multiple ions in solution. The principle requirement prior to use the IC for an analysis is sample preparation; these include sample decomposition, solvent extraction, and trapping in case the target element is in the gas phase, etc. Solvent extractions for fluoride, chloride, sodium, ammonium, and potassium ions which are soluble in soils are described. Sample decompositions include silicate rocks using hydrofluoric acid for the determination of phosphorus; organic pesticides using lithium fusion technique for the determination of halide and cyanide ions are also described. After these sample preparation techniques, the aqueous solutions obtained were analyzed on the ion chromatograph for the analyses of the anions and cations mentioned above. Recovery and reproducibility of each technique is in general quite good and the comparison between the results obtained from the IC method and other instrumentation are given.
Raman and NMR Relaxation Studies of Molecular Dynamics in Liquids
Raman vibrational bands are sensitive to fluctuations in the molecular environment. Variations in the bandwidth and peak position can then be utilized to monitor molecular forces and interactions present in condense phases. Nuclear Magnetic Resonance (NMR) provides a convenient probe for the study of molecular reorientation in liquids since nuclear spin relaxation times are dependent on the details of molecular motion. Presented here is the solvent study of the Raman bandwidths and frequency displacements of the mode of the compounds CH3MCI3 (M = C, Si, Ge, Sn) in a number of solvents of widely varying molecular structure. Also, a detailed isotope dilution study of the modes in CH2CI2/CD2CI2 mixtures is presented. In this set of experiments, I observed broadening of the v1 mode of CH2C12 upon dilution,which is the first experimental observation of such behavior. The temperature-dependent carbon-13 relaxation times and nuclear Overhauser enhancements in neat dichloromethane were measured. In this study we found that the molecular reorientation of this molecule was highly anisotropic, but could be well characterized assuming quasi-symmetric top behavior. In addition, in order to gain a more complete understanding of the reorientational dynamics in dichloromethane, we analyzed the 13-C NMR relaxation of CH2CI2 both in "inert" solvents of differing viscosities and in interactive solvents of varying Lewis basicities. Various theoretical models were also applied in order to characterize dichloromethane1s reorientational dynamics.
Kinetics Studies of Substituted Tungsten Carbonyl Complexes
Thermal reactions and flash photolysis are used to study the olefin bond-migration promoted by tungsten carbonyls. Substitution of piperidine (pip) by 2- allylphenyldiphenylphosphine (adpp) in the cis-(pip)(η^1- adpp)W(CO)-4 complex was investigated, and no olefin bond-migration was observed. This suggests that a vacant coordinated site adjacent to the coordinated olefin is an essential requirement for olefin bond rearrangement. The rates of olefin attack on the photogenerated coordinatively unsaturated species, cis-[(CB)(η^1-ol- P)W(CO)-4] (CB = chlorobenzene, p-ol = Ph-2P(CH-2)-3CH=CH-2; n = 1-4) were measured. Kinetics data obtained both in pure CB and in CB/cyclohexane mixtures support a dissociative mechanism in which the W-CB bond is broken in the transition state. In contrast to results observed in studies of other related systems, no olefin bond-migration is noted. This observation is attributed to P-W coordination at all stages of the reaction, which precludes formation of a reactive intermediate containing a vacant coordination site adjacent to a P-ol bond.
Kinetics and Mechanisms of Ligand Exchange Reactions of Chelate Complexes
Certain ligand substitution reactions proceed to a complete displacement of the chelate ligand. Certain reactions proceed through a mechanism involving an initial fission of the tungsten-sulfur bond to afford a coordinatively-unsaturated intermediate which is rapidly attacked by chlorobenzene. The resulting solvated intermediate establishes an equilibrium which involves desolvation-solvation. Although main group organometallic chemistry has received a great deal of attention, this discussion will be centered in organotransition metal chemistry, in particular, metal carbonyls.
Thermal Reactions of Four-Membered Rings Containing Silicon or Germanium
The synthesis of E- and Z-1,1,2,3-tetramethylsilacyclobutanes is described. Pyrolysis of either isomer at 398.2 °C provides the same products but in different amounts: propene, E- and Z-2-butene, allylethyldimethylsilane, dimethylpropylsilane, the respective geometric isomers, 1,1,2,3,3-pentamethyl-1,3-disilacyclobutane, 1,1, l-ethyldimethyl-2,2,2-vinyldimethyl-disilane and E- and Z-1,1,2,3,3,4-hexamethyl-1,3-disilacyclobutane. Mechanisms involving di- and trimethylsilenes are described for disilane formation and rate constants of the elementary steps for the fragmentation reactions are reported. Photochemically generated dimethylsilylene in the hydrocarbon solution inserts into the cyclic Ge-C or Si-C bonds of 1,1-dimethylgerma- or silacyclobutane to produce 1-germa-2-sila- or 1,2-disilacyclopentane. The relative reactivities of 1,1-dimethylgerma- and silacyclobutanes toward the dimethylsilylene have been determined. The carbenoid resulting from the cuprous chloride catalyzed decomposition of diazomethane at 25 °C in cyclohexane reacts with 1,1-dimethylgermacyclobutane to give, surprisingly 1,1,5,5-tetramethyl-1,5-digermacyclooctane as the major product. The reactions of the carbenoid with 1,1-dimethylsilacyclobutane are described. The kinetics of gas phase thermal decomposition of 1,1-dimethylgermacyclobutane has been studied over the temperature range, 684 - 751 K at pressures near 14 Torr. The Arrhenius parameters for the formation of ethylene are k_1 (s^-1) = 10^(14.6 ± 0.3) exp (62.7 ± 2.9 kcal mol^-1/RT) and those for the formation of propene and cyclopropane are k_2 (s^-1) = 10^(14.0 ± 0.1 ) exp (60.4 ± 2.8 kcal mol^-1/RT). Static gas phase pyrolyses of 1,1-dimethyl-lsilacyclobutene, DMSCB, in the presence of a variety of alkenes and alkynes at 260 - 365 °C have been studied. Our experimental results suggest that under these conditions the DMSCB ring opens to 1,1-dimethyl-l-silabutadiene, which either recyclizes to DMSCB or reacts with alkenes or alkynes in competing 4 + 2 and 2 + 2 cycloadditions.
Molecular Dynamics in the Liquid Phase by FT-NMR, FT-IR and Laser Raman Lineshape Analysis
Nuclear magnetic resonance (NMR) provides a convenient probe for the study of molecular reorientation in liquids because nuclear spin-lattice relaxation times are dependent upon the details of molecular motion. The combined application of Raman and Infrared (IR) lineshape analysis can furnish more complete information to characterize the anisotropic rotation of molecules. Presented here are the studies of NMR relaxation times, together with Raman/IR Mneshape analysis of the solvent and temperature dependence of rotational diffusion in 1,3,5-tribromobenzene and 1,3,5-trifluorobenzene. In these experiments, it was found that the rotational diffusion constants calculated from Perrin's stick model were two to three times smaller than the measured values of D, and D,,. Similarly, rotational diffusion constants predicted by the Hu-Zwanzig slip model were too large by a factor of 2. Application of the newer Hynes-Kapral-Weinberg model furnished rotational diffusion constants that were in reasonable agreement with the experimental results. The vibrational peak frequencies and relaxation times of the isotropic Raman spectra of the υ1 modes of CD2Br2 and CHBr3 were studied in solution. The frequency shifts in non-interactive solvents were explained well on the basis of solution variations in the dispersion energy. In Lewis bases, the displacements were in some, but not all, cases greater than predicted. On the other hand, it was found that the vibrational relaxation times of the C-H/C-D modes decreased dramatically in all Lewis base solvents. Therefore, it was concluded that relaxation times of the υ1 modes, rather than frequency shifts, furnish a more reliable measure of hydrogen bonding interactions of halomethanes in solution.
Hydrogen terminated silicon surfaces: Development of sensors to detect metallic contaminants and stability studies under different environments
Hydrogen terminated silicon surfaces have been utilized to develop sensors for semiconductor and environmental applications. The interaction of these surfaces with different environments has also been studied in detail. The sensor assembly relevant to the semiconductor industry utilizes a silicon-based sensor to detect trace levels of metallic contaminants in hydrofluoric acid. The sensor performance with respect to two non-contaminating reference electrode systems was evaluated. In the first case, conductive diamond was used as a reference electrode. In the second case, a dual silicon electrode system was used with one of the silicon-based electrodes protected with an anion permeable membrane behaving as the quasi reference electrode. Though both systems could function well as a suitable reference system, the dual silicon electrode design showed greater compatibility for the on-line detection of metallic impurities in HF etching baths. The silicon-based sensor assembly was able to detect parts- per-trillion to parts-per-billion levels of metal ion impurities in HF. The sensor assembly developed for the environmental application makes use of a novel method for the detection of Ni2+using attenuated total reflection (ATR) technique. The nickel infrared sensor was prepared on a silicon ATR crystal uniformly coated by a 1.5 micron Nafion film embedded with dimethylglyoxime (DMG) probe molecules. The detection of Ni2+ was based on the appearance of a unique infrared absorption peak at 1572 cm-1 that corresponds to the C=N stretching mode in the nickel dimethylglyoximate, Ni(DMG)2, complex. The suitable operational pH range for the nickel infrared sensor is between 6-8. The detection limit of the nickel infrared sensor is 1 ppm in the sample solution of pH=8. ATR - FTIR spectroscopy was used to study the changes that the hydride mode underwent when subjected to different environments. The presence of trace amounts of Cu2+ in HF solutions was found to roughen the silicon …
Anion Exchange and Competition in Layered Double Hydroxides
Exchange reactions of anions, especially ferrocyanide and carbonate, with layered double hydroxides (LDHs) were investigated in relation to the origin of life on the early Earth. The effect on ferrocyanide exchange of concentration, pH, reaction time and cations are discussed. It was found that there were two different kinds of ferrocyanide species: one was that intercalated into the layered structure, occupying a site of D symmetry within the LDHs, while in the other, the ferrocyanide group retains full O symmetry. In addition, very low concentration, ferrocyanide associated with LDH will change its FTIR absorption shape. Carbonate was much more strongly intercalated than ferrocyanide into the LDHs, probably because of the strong hydrogen bonding.
Some Physical Characteristics and Heavy Metal Analyses of Cotton Gin Waste for Potential use as an Alternative Fuel
This study examines the waste of cotton gins as a potential alternative energy source, on account of its heat content, availability, and low emission rates. To confirm that this potential energy source meets minimum industrial fuel standards, this research has carried out an investigation of some important physical characteristics and toxic element analysis of cotton gin waste. Using cotton gin waste as fuel is an attractive solution to the problems of disposing of a surplus agricultural waste as well as supplementing fuel must meet both environmental emission standards and industrial fuel standards, the physical and chemical characteristics of cotton gin waste and its toxic element concentrations are important for its objective evaluation as a fuel. Constituent components, moisture contents, and ash contents of four separate parts of cotton gin waste were determined and evaluated closely following the American Society for Testing and Materials (ASTM) test methods. The three most toxic heavy metals, Arsenic (As), Chromium (Cr), and Lead (Pb), chosen for quantitative analysis were determined by using an inductively coupled plasma atomic emission spectrometry and a microwave oven sample digestion method.
Aqueous Solubilities and Water Induced Transformations of Halogenated Benzenes
Methods of determining the aqueous solubilities of twelve chlorinated benzenes were evaluated in pure and in different water matrices. In pure water, results were comparable with the calculated values. Higher chlorinated tetrachlorobenzenes (TeCBs), pentachlorobenzenes (PCBz), and hexachlorobenzenes (HCBs) gave better precision and accuracy than lower chlorinated monochlorobenzenes (MCBs), dichlorobenzenes (DCBs), or trichlorobenzenes (TCBs).
Studies of Layered Double Hydroxides
This work concerns some synthetic processes and basic properties of layered double hydroxides (LDHs). A series of LDHs, a family of newly developed materials found to have many potential uses in industry, were investigated in relating to the origin of life on early Earth. In this work, I successfully intercalated some inorganic as well as organic species. Ammonium, accompanied with ferrocyanide ion, can enter the layered space. It was found there were two kin go f intercalated ferrocyanide species: one is that exchanged with anions and became a part of layered double hydroxide, while the other is suggested to be related to ammonium ferrocyanide neutral species. Formaldehyde, ethanolamine and formate can also be involved into LDHs. To improve the crystallinity, homogeneous precipitation method, which used Urea and Hexamine, was employed. The results reveal the success in the case by Urea but not in that by Hexamine. Annealing could also be used for this purpose. However, it needs to be preocessed in its mother liquor; no improvement on the crystallinity if the material has been washed before annealing.
Calcium Aluminates Synthesis, Characterization, and Hydration Behavior
The hydration behavior of the calcium aluminates as a function of the glass content, the curing temperature, and the water-solid ratio was investigated. In order to keep them from influencing the results, the free-lime content and the surface area of all samples were kept constant, whenever possible. Samples were hydrated with a water-solid ratio of 10/1 for periods of 1 to 90 days. Three curing temperatures were studied; 2°C, 25°C, and 50°C. Samples were hydrated in tightly sealed polyethylene containers to prevent reactions with atmospheric carbon dioxide. The hydration was followed by X-ray diffraction and thermal analysis. Only two samples, Hexacalcium Tetra-alumino Magnesium Silicate and Tricalcium Magnesium Dialuminate, were successfully prepared in an amorphous form. These compounds were used to investigate the effect of glass content on the hydration behavior. Results indicate that when the glass content is increased a corresponding increase is found in the percent combined water. Samples hydrated at 25°C were influenced by changes in the glass content to a greater degree than were those hydrated at either 2°C or 50°C. The effect of the water-solid ratio on the hydration behavior of the calcium aluminates was studied using the compounds; Hexacalcium Tetra-Alumino Magnesium Silicate/ and Dodecacalcium Hepta-Aluminate. In general, samples that were hydrated with large water-solid ratios reacted more completely than did those hydrated with small water-solid ratios. The presence of sufficient water to theoretically hydrate the samples to completion did not guarantee that the sample would do so. The curing temperature influenced the hydration behavior to a greater degree than did the glass content or the water-solid ratio. Increasing the curing temperature not only increased the rate of hydration, but, in some cases, also changed the hydration products.
Studies of the Mechanisms of Reactions of Binary Metal Carbonyls
A kinetic study of the reactions of Group VI-B hexacarbonyls with primary amine and halide ligands was undertaken in order to determine the possible mechanisms of these reactions. As well as the expected dissociative pathway, the reactions with the primary amines were seen to proceed by a concurrent pathway which was dependent upon the ligand concentration. Since nitrogen donor ligands are expected to be poor donor ligands, the mechanism proposed was a "dissociative interchange" mechanism which should not be too dependent upon the nucleophilicity of the ligand. Comparison of the rate constants for the amines studied as well as those of the previously investigated Lewis base ligands indicated all such reactions may proceed through the same mechanism. The similarity in rate constants for the ligand-independent and ligand-dependent pathways supports this mechanism. The rate of formation of the final product was seen to be dependent upon the square of the mercuric halide concentration. Therefore, the conversion of Fe(CO)4(HgX)2 to the final product was proposed to proceed by the successive abstraction by each HgX group of two molecules of mercuric halide. These oxidative elimination reactions are related to a chemical model for the intermediate step in the reduction of dinitrogen to ammonia and their similarities and differences are discussed.
Studies of Nitrogen-containing Compounds Having Pyrethroid-like Bioactivity
During recent years most of the successful developments in pyrethroids have been primarily concerned with structural or compositional variations. As a part of our continuing interest in pyrethroid insecticides, nitrogen-containing compounds having pyrethroid-like structures were synthesized. Seven prolinate compounds, N-(substituted)-phenyl-prolinates and N-carbobenzoxy-prolinates were coupled with known pyrethroid alcohols. These structural variations which "locked in" a specific conformation between the nitrogen and chiral a-carbon in the acid moiety of fluvalinate were studied to determine the influence of certain conformations on insecticidal toxicity. The toxicity data for the prolinate compounds showed intermediate mortality against nonresistant cockroaches. It was concluded that the conformation imposed by the proline ring portion of the esters was probably close to the favored conformation for interaction of fluvalinate-like pyrethroids with the insect receptor site. A second series of nitrogen-containing compounds, twenty-five carbamate esters resulting from the condensation of N-isopropyl-(substituted)-anilines and N-alkyl-(substituted)-benzylamines with appropriate pyrethroid alcohols were studied for insecticidal activity. These studies were conducted on pyrethroid-susceptible houseflies. Some of the carbamate esters exhibited high toxicity when synergized by piperonyl butoxide. For example, the toxicity ( LD 50 ) of O-a-cyano-3-phenoxyfaenzyl-N-a,a-dimethyl-4-bromo-benzyl carbamate was 0.012 ug/g, which is significantly greater than that reported for the potent pyrethroid, fenvalerate. Correlations of insecticidal activity with respect to structure and conformational factors of the carbamate esters have been made. The N-isopropyl substituent decreases insecticidal activity in the N-benzyl-derived compounds, while the N-isopropyl substituent enhances activity in the N-phenyl-derived compounds. Certain substituents on the phenyl ring of both analogs greatly affect insecticidal potency of the carbamate esters. Also, some alkyl substituents (especially, a,cx-dimethyl and a-cyclopropyl groups) on the benzylic carbon of the benzylamine series enhance toxicity. The a,a-dimethyl branching of the N-benzyl carbamate approximates the steric shape given by the gemdimethyl group for conventional cyclopropane ring-containing pyrethroids. The N-benzyl compounds are significantly synergized by …
Intramolecular [2+2] Cycloadditions of Phenoxyketenes and Intermolecular [2+2] Cycloadditions of Aminoketenes
One objective of this study was to explore the intramolecular [2+2] cycloadditions of phenoxyketenes to carbonyl groups with isoflavones and benzofurans as target compounds. The other objective was to investigate the eyeloaddition reactions of rarely studied aminoketenes. The conversion of 2-(carboxyalkoxy)benzils to the corresponding phenoxyketenes leads to an intramolecular [2+2] cycloaddition to ultimately yield isoflavones and/or 3-aroylbenzofurans. The product distributions are dependent upon the substitution pattern in the original benzil acids. The initial cycloaddition products, β-lactones, are isolated in some instances while some β-lactones spontaneously underwent decarboxylation and could not be isolated. The ketene intermediate was demonstrated in the intramolecular reaction of benzil acids or ketoacids with sodium acetate and acetic anhydride. It is suggested that sodium acetate and acetic anhydride could serve as a source for the generation of ketenes directly from certain organic acids. The treatment of ketoacids with acetic anhydride and sodium acetate provides a simpler procedure to prepare benzofurans than going through the acid chloride with subsequent triethylamine dehydrochlorination to give the ketenes. N-Ary1-N-alkylaminoketenes were prepared for the first time from the corresponding glycine derivatives by using p-toluenesulfonyl chloride and triethylamine. These aminoketenes underwent in situ cycloadditions with cyclopentadiene, cycloheptene and cyclooctenes to yield only the endo -bicyclobutanones. The cycloheptene and cyclooctene cycloaddition products underwent dehydrogenation under the reaction conditions to yield bicycloenamines. A mechanism is proposed for this dehydrogenation involving a radical cation of the arylalkylamine. (N-Phenyl-N-methyl) aminomethylketene was also prepared and found to undergo an intramolecular Friedel-Crafts type acylation to yield an indole derivative when prepared by the acetic anhydride, sodium acetate method. The in situ cycloaddition of N-aryl-N-alkyl aminoketenes with various imines was found to form predominately cis-3-amino-2-azetidinones. A mechanism involving a dipolar intermediate is provided whereby the structure of the intermediate is determined by both electronic and steric effects. The stereochemistry of …
Isomerization Reactions in Organosilicon Chemistry
Dimethylsilene, generated from the thermal gas phase reaction of 1,1-dimethyl-1-silacyclobutane, reacts with alkynes to produce silacyclobutenes or acyclic silanes. The temperature dependence of the product ratios have been determined and the relative reactivities of three different alkynes toward the 1,1-dimethylsilene has been determined. 1-Hydrido-1-methylsilene has been generated by gas phase thermal decomposition from three different precursors. Trapping studies with butadiene and trimethylsilane lead to products expected from dimethylsilylene. The most plausible explanation for these observations is that hydridomethylsilenes undergo a facile isomerization to divalent dimethylsilylene. Cycloaddition of 1,1-dimethylsilene to allene at 600°C in a flow vacuum pyrolysis system affords the first synthesis of 2-methylene-1,1-dimethylsilacyclobutane and smaller amounts of six other products. For static pyrolysis at 421°C, the 2-methylene-1,1-dimethyIsilacyclobutane isomerizes to 1,1-dimethylsilacyclopentenes. The kinetics of gas phase thermal decomposition of cyclopropyltrimethylsilane has been studied over the temperature range, 689.6-751.1 K at pressures near 14 torr. The Arrhenius parameters for formation of allyltrimethylsilane are k_1(sec^-1)=10^14.3 ± 0.1 exp(-56.5 ± 0.2 kcal mol^-1/RT) and those for the formation of E- and Z-1-propenyltrimethyIsilane are k_2(sec^-1)=10^14.9 ± 0.3 exp(-61.9 ± 0.8 kcal mol^-1/RT). The difference between activation energies has been interpreted in terms of anchimeric assistance or the β effect of the silicon atom. The syntheses of 3-trimethylsilyl-1-pyrazoline and 1-trimethyl-2-pyrazoline are described. The thermal decomposition of either pyrazoline affords four different products along with elimination of a nitrogen molecule. It was suggested that the relative rates of methylene-hydrogen migration to radical centers α and γ to silicon are approximately equal. The thermal isomerization of 3-trimethylsilyl-1-pyrazoline to 1-trimethylsilyl-2-pyrazoline has been investigated kinetically at 65°C by proton NMR spectroscopy and the reverse reaction has been detected by gas phase pyrolysis.
A Comparative Quantitative Study of the Common Elements Found in the Post Oak and Willow
This thesis explores the chemical contents of post oak and willow trees. Samples of each tree are compared to determine the amount of sulfur, phosphorus, potassium, sodium, silicon, iron, aluminum, calcium, magnesium, and manganese in them. Results indicated usefulness of each tree to humans.
Calcium Silicates: Glass Content and Hydration Behavior
Pure, MgO doped and B2C3 doped monocalcium, dicalcium, and tricalcium silicates were prepared with different glass contents. Characterization of the anhydrous materials was carried out using optical microscopy, infrared absorption spectroscopy, and X-ray powder diffraction. The hydration of these compounds was studied as a function of the glass contents. The hydration studies were conducted at 25°C. Water/solid ratios of 0.5, 1, 10, and 16 were used for the various experiments. The hydration behavior was monitored through calorimetry, conductometry, pH measurements, morphological developments by scanning electron microscopy, phase development by X-ray powder diffraction, and percent combined water by thermogravimetry. A highly sensitive ten cell pseudo-adiabatic microcalorimeter was designed and constructed for early hydration studies. Conductometry was found to be of great utility in monitoring the hydration of monocalcium silicate and the borate doped dicalcium silicates.
The Stereochemistry of Silenes and Alpha-Lithio Silanes
When E- or Z-l-methyl-l-phenyl-2-neopentylsilene was generated by the retro-Diels-Alder vacuum-sealed tube thermolysis of its corresponding anthracene adduct, in the presence of various alkoxysilanes, only one diastereomeric adduct was formed in each case, showing that the reactions are stereospecific. An x-ray crystal structure of the methoxytriphenylsilane adduct of the E-silene confirmed its relative configuration as (R,S) or (S,R). This demonstrated that the addition of alkoxysilanes to silenes is stereospecific and syn. The relative configurations of similar alkoxysilane and alkoxystannane adducts to E- and Z-l-methyl-l-phenyl-2-neopentylsilene were assigned based on a combination of xray structures and *3C NMR data. A strong, nonbonded oxygen-metal interaction is apparent in all of those compounds studied. Treatment of the alkoxystannane adducts with alkyl lithium reagents results in tin-lithium exchange in some cases. The results indicate that the resulting <x-lithio alkoxysilanes are not configurationally stable in either THF or hydrocarbon solvents. The reaction of tert butyl lithium with a-trimethylsilylvinylmethylphenylchlorosilane in hydrocarbon solvents yields E- and Z-l-methyl-l-phenyl-2-neopentyl-2-trimethylsilylsilene. In the absence of any traps these silenes undergo a novel tert butyl lithium catalyzed rearrangement to 2-phenyl-3-trimethylsilyl-5,5-dimethyl-2-silahex-3-ene. These silenes were also trapped as their [4+2] cycloadducts with anthracene. The Z-isomer of the anthracene adduct was separated and its stereochemistry confirmed by an x-ray crystal structure. The anthracene adducts of both E- and Z-l-methyl-1-phenyl-2-neopentyl-2-trimethylsilylsilene undergo a facile, stereospecific decomposition at temperatures as low as 190°C to regenerate their respective silenes, the mildest stereospecific route to a silene yet reported. The E- and Z-silenes react stereospecifically with methanol under vacuum-sealed tube conditions. The stereochemistry of the addition is syn and a common mechanism is proposed for the addition of alcohols and the addition of alkoxysilanes to silenes.
Electrodeposition of Diamond-like Carbon Films
Electrodeposition of diamond-like carbon (DLC) films was studied on different substrates using two different electrochemical methods. The first electrochemical method using a three-electrode system was studied to successfully deposit hydrogenated DLC films on Nickel, Copper and Brass substrates. The as-deposited films were characterized by scanning electron microscopy (SEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), fourier transform infrared spectroscopy (FTIR) and cyclic voltammetry (CV). A variety of experimental parameters were shown to affect the deposition process. The second electrochemical method was developed for the first time to deposit hydrogen free DLC films on Ni substrates through a two-electrode system. The as-deposited films were characterized by Raman spectroscopy and FTIR. According to Raman spectra, a high fraction of diamond nanocrystals were found to form in the films. Several possible mechanisms were discussed for each deposition method. An electrochemical method was proposed to deposit boron-doped diamond films for future work.
Back to Top of Screen