This study is an investigation of the chemical vapor deposition (CVD) of aluminum and copper on fluoropolymer surfaces and the subsequent interfacial interactions.
In order to explore the N-H stretching region of aliphatic amines, we performed a study of the Raman spectrum of n-propylamine at various concentrations in cyclohexane. Statistical analysis provided evidence of a second symmetric stretching vibration, which we were able to assign to nonhydrogen bonded NH2 groups. To obtain additional evidence on the existence of monomers in n-propylamine and to further study hydrogen bonding and Fermi resonance in aliphatic amines, we extended the investigation to the analysis of the Raman spectrum of this compound over an extended range of temperature in the neat liquid phase. This study corroborated our finding that the peak previously assigned to the symmetric stretching mode of hydrogen bonded amines is actually composed of two bands. Furthermore, trends in both the resolved band parameters and the Fermi resonance analysis were tabulated, allowing one to monitor the change in the N-H valence region with concentration and temperature.
The reaction of chlorodimethylvinylsilane with tertbutyllithium was investigated in the presence of several conjugated dienes. In all cases except with 2,5-dimethylfuran, [2+4] cycloadducts of a silene intermediate are obtained in hydrocarbon solvents. The presence of THF in the reaction mixture suppresses the formation of cycloadducts in favor of 1,3-disilacyclobutanes. In the reaction of dimethylethoxyvinylsilane or dimethylmethoxyvinylsilane with tert-butyllithium the main product is the 1,1-dimethyl2-neopentyl-4-(dimethylalkoxysilyl)silacyclobutane. It is concluded that lithium chloride elimination to give silene intermediates occurs in hydrocarbon solvents. In the presence of strong Lewis bases or when the leaving group on silicon is an alkoxy group, the addition reaction giving a-lithiosilanes occurs and products arising from their coupling reactions are obtained.
This study deals with the (4+2)-cycloaddition reactions of 4-π electron compounds with ketenes. Chloroketenes were generated in situ from the corresponding chlorinated acid chlorides in the presence of the ketenophiles. Chloro-, dichloro- and diphenylketenes reacted with 1-methoxy-3-trimethylsiloxy-l,3-butadiene, and 2,4-bis(trimethylsiloxy)-1,3-pentadiene to yield the corresponding dihydropyrans. The dihydropyrans yielded substituted 4-pyranones on hydrolysis.
Various modern spectroscopies have been utilized with considerable success in recent years to probe the dynamics of vibrational and reorientational relaxation of molecules in condensed phases. We have studied the temperature dependence of the polarized and depolarized Raman spectra of various modes in the following dihalomethanes: dibromomethane, dichloromethane, dichloromethane-d2, and bromochloromethane. Among other observed trends, we have found the following: Vibrational dephasing times calculated from the bend) and (C-Br stretch) lineshapes are of the same magnitude in CI^B^. The vibrational dephasing time of [C-D(H) stretch] is twice as long in CD2Cl2 as in CH-^C^, and the relaxation time of (C-Cl stretch) is greater in CI^C^ than in CD2CI2. Isotropic relaxation times for all three stretching vibrations are significantly shorter in C^BrCl than in CI^C^ or CI^B^. Application of the Kubo model revealed that derived modulation times are close to equal for equivalent vibrations in the various dihalomethanes. Thus, the more efficient relaxation of the A^ modes in CE^BrCl can be attributed almost entirely to the broader mean squared frequency perturbation of the vibrations in this molecule.
Cyclopropanation of the unsaturated fatty acid moieties of membrane phospholipids is a commonly observed phenomenon in a number of bacterial systems. The cyclopropane fatty acids are usually synthesized during and after the transition from exponential growth to stationary phase, or under such environmental conditions as acidic culture pH, low oxygen tension or high salt concentrations. S-Adenosylmethionine, the ubiquitous methyl group donor, provides the methylene bridge carbon in the reaction catalyzed by cyclopropane fatty acid synthase. Also formed in the reaction is S-adenosylhomocysteine, a potent inhibitor of cyclopropane fatty acid synthase, which is degraded by S-adenosylhomocysteine nucleosidase. This work provides evidence for at least two modes of regulation of lactobacillic acid synthesis, the cyclopropane fatty acid formed from cis-vaccenic acid (cis-11,12-octadecenoic acid), in Lactobacillus piantarum.
The reactions of tert-butyl-, sec-butyl-, and n-butyllithium with dimethylfluorovinylsilane include addition to the double bond to give both silene and silenoid intermediates, fluorine substitution, and a novel vinyl substitution. For the tert-butyllithium reaction, product stereochemistry and trapping experiments using both cyclopentadiene and methoxytrimethylsilane show that silenes are not formed in THF. In hexane about 67% of the 1,3-disilacyclobutanes obtained arise from silene dimerization while 33% are formed by silenoid coupling. In hexane the order of reactivity for addition, t-Bu > sec-Bu > n-Bu, is opposite that for fluorine substitution. The vinyl substitution is most significant with secondary alkyllithium reagents including the tert-butyllithium adduct to dimethylfluorovinylsilane and with sec-butyllithium itself. Evidence for the formation of vinyllithium or ethylene in the process could not be obtained.
A study has been conducted for the qualitative and Quantitative analysis of chlorinated organic compounds in water. The study included the adaptation of Amberlite XAD macroreticular resin techniques for the concentration of municipal wastewater samples, followed by GC/MS analysis. A new analytical method was developed for the determination of volatile halogenated organics using liquid-liquid extraction and electron capture gas chromatography. And, a computer program was written which searches raw GC/MS computer files for halogen-containing organic compounds.
This dissertation reports the preparation of several types of anthraquinones structurally related to adriamycin. It describes the synthesis of two types of 2-aminoquinizarin compounds. It also presents two new syntheses of a heterocyclic tetracyclic ring system, similar to the aglicone ring system of adriamycin. A series of 2-aminoquinizarins was prepared by adding several primary amines to quinizarin. Quinizarin was shown to be essentially inert toward secondary amines. Several secondary amine adducts with quinizarin have been prepared, however, by treating the bis-boroacetate ester of quinizarin with the amines. Both types of 2-aminoquinizarin compounds exhibit outstanding potential for possessing antineoplastic activity, and several have been submitted to the National Cancer Institute for testing in their screening program for antineoplastic agents.
This thesis examines the use of zinc for electroplating and compares its use to other metals. Experiments conducted to gather data indicated circumstances which resulted in optimal results.
This thesis explores the Hicoria genus and focuses on the Stuart variety of pecan tree. Experimentation yielded the ash constituents, fats, fat constants, crude fiber, protein, and sugar in shelled pecan samples.
Ketene dimethyl thioacetal monosulfoxide was prepared in 68% overall yield in two steps starting from methylmagnesium chloride. The yield of dithioacetic acid was improved significantly by employing tetrahydrofuran as solvent and using elevated temperatures. A one-pot synthesis of ketene thioacetals from alkyl halides was developed and several ketene thioacetals were prepared by this method. Direct oxidation of ketene thioacetals using m-chloroperoxybenzoic acid provided a general route to ketene thioacetal monosulfoxides. In cases where E and Z isomeric ketene thioacetal monosulfoxides were possible, the E/Z isomeric ratio increased as the substituents on the ketene double bond was increased in size.
The reaction of tert-butyllithium with chloromethylphenylvinylsilane at low temperatures in hexane gave a 48% yield of a mixture of the five isomers of 1,3-dimethyl-1,3-diphenyl-2,4-dineopentyl-1,3-disilacyclobutane, formed by the head-to-tail dimerization of both E- and Z-1-methyl-1-phenyl-2-neopentylsilenes, along with an acyclic dimer. These were separated and their stereochemistry was established by ('1)H- and ('13)C-NMR spectroscopy. The E- and Z-silenes were also trapped as their {4 + 2} cycloadducts with cyclopentadiene, 2,3-dimethyl-1,3-butadiene and anthracene, which also were separated and stereochemically characterized. A consistent mole ratio of 70:30 for the E- and Z-silene adducts is interpreted as evidence for stereochemical induction in the silene generation reaction. It is also suggested that the dimerization of the silenes to give the 1,3-disilacyclobutanes occurs by a nonstereospecific stepwise pathway. When E- or Z-1-methyl-1-phenyl-2-neopentylsilene was generated by the retro-Diels-Alder flow vacuum thermolysis of its corresponding cyclopentadiene or anthracene adduct at temperatures between 400 and 600(DEGREES)C and then trapped with 2,3-dimethyl-1,3-butadiene, the stereochemical distribution of the products is independent of the stereochemistry of the silene precursor, indicating that the silene is not configurationally stable towards cis-trans isomerization at these temperatures. Evidence that the intermolecular ene reaction and the {4 + 2} cycloaddition which occur with 2,3-dimethyl-1,3-butadiene are concerted is presented. When either the E- or Z-silene, generated by the sealed tube thermolysis of its anthracene adduct by 300(DEGREES)C, was trapped with trimethylmethoxysilene, the diastereomer obtained depended on the stereochemistry of the silene precursor, showing that the silene is configurationally stable towards cis-trans isomerization up to 300(DEGREES)C. The temperature dependence of the ratio of the two diastereomers obtained when the silene formed from the pure E- or Z-anthracene adduct was trapped at higher temperatures permitted the determination of an activation energy for the silene isomerization. The activation energies for the E- and Z- and Z- to E-silene isomerization are 45 (+OR-) …
The objective of this study was to develop new synthetical routes to natural and industrial products utilizing ketene cycioaddition reactions. The cycioaddition of diphenylketene with α,β-unsaturated imines yields (2+2) cycioaddition products, g-lactams. However, electron donating groups, such as dimethylamine, in the 4-position of the α,β-unsaturated imines result in (4+2) cycloaddition products, ∂-lactams. Dichloroketene reacted with α,β-unsaturated imines to yield (4+2) cycloaddition products, g-lactams. Large substituents in the 4-position of a, ^-unsaturated imines resulted in a (2+2) cycioaddition product, β-lactam. The ∂-lactams derived from dichloroketene are easily dehydrochlorinated to the corresponding 2-pyridornes.
This work presents the development of a new highly sensitive and selective chemical assay for poly(ADP-ribose) which is routinely useful for the determination of polymer levels in vivo. This method was used to carefully measure poly(ADP-ribose) levels in normal and in DNA-damaged cells. The results of these studies strongly suggest that synthesis of poly(ADP-ribose) is involved in some aspect of DNA repair. A review of the literature is presented in the introduction of this work. Poly(ADP-ribose) synthesis has been implicated in aspects of transcription, in DNA syn thesis, and in DNA repair largely based on evidence from in vitro studies. It is apparent that current methodology has not allowed the routine quantification of poly(ADP-ribose) in vivo, hence the lack of i^n vivo data concerning the function(s) of the polymer. The body of this work presents the development of two chemical methods for the quantification of poly(ADP-ribose) and the application of one of these methods to the measurement of polymer levels in normal and DNA-damaged cells. Preliminary studies are presented on the utilization of combined gas chromatography/mass spectroscopy for the selective quantification of nucleoside derivatives. A second method makes use of the unique chemistry of the polymer for quantification. The polymer was selectively adsorbed to dihydroxyboryl-sepharose which allowed the removal of most RNA, DNA, and protein from the samples. The polymer was hydrolyzed to the unique nucleoside 2'—^-l*'-ribosyladenosine by digestion with venom phosphodiesterase and bacterial alkaline phosphatase. The 1-N^-etheno derivative of ribosyladenosine was formed by reaction with chloroacetaldehyde and this derivative was seperated from other fluorescent species by reversed phase high pressure liquid chromatography.
This thesis presents the results of an experiment conducted to discover if selenic acid or monazite sand are possible catalysts that can be used for the alkylation of isobutane and isobutene.
This thesis examines the reactions of hydrocarbons exposed to chlorosulfonic acid in order to establish the reaction rate and associated molecular structure of each compound.
The enzyme 3-Hydroxy-3- Methylglutaryl Coenzyme A Reductase catalyzes the rate limiting step of hepatic cholesterol biosynthesis and is unique among the enzymes in the early part of the pathway in that it is membrane bound. This gives rise to potential regulation of the enzyme through interactions with the endoplasmic reticulum membrane. A purification procedure has been developed which consistently produces enzyme of high specific activity. In order to fully characterize the interactions between HMG-CoA reductase and the lipids in its immediate environment, HMG-CoA reductase was purified to homogeneity and shown to be a protein-lipid complex.
Our country continues to demand clean renewable energy to meet the growing energy needs of our time. Thus, natural gas, which is 87% by volume of methane, has become a hot topic of discussion because it is a clean burning fuel. However, the transportation of methane is not easy because it is a gas at standard temperature and pressure. The usage of transition metals for the conversion of small organic species like methane into a liquid has been a longstanding practice in stoichiometric chemistry. Nonetheless, the current two-step process takes place at a high temperature and pressure for the conversion of methane and steam to methanol via CO + H2 (syngas). The direct oxidation of methane (CH4) into methanol (CH3OH) via homogeneous catalysis is of interest if the system can operate at standard pressure and a temperature less than 250 C. Methane is an inert gas due to the high C-H bond dissociation energy (BDE) of 105 kcal/mol. This dissertation discusses a series of computational investigations of oxy-insertion pathways to understand the essential chemistry behind the functionalization of methane via the use of homogeneous transition metal catalysis. The methane to methanol (MTM) catalytic cycle is made up of two key steps: (1) C-H activation by a metal-methoxy complex, (2) the insertion of oxygen into the metal−methyl bond (oxy-insertion). While, the first step (C-H activation) has been well studied, the second step has been less studied. Thus, this dissertation focuses on oxy-insertion via a two-step mechanism, oxygen-atom transfer (OAT) and methyl migration, utilizing transition metal complexes known to activate small organic species (e.g., PtII and PdII complexes). This research seeks to guide experimental investigations, and probe the role that metal charge and coordination number play.
Polymeric nanoparticles were designed, synthesized, and loaded with metal ions to explore the therapeutic potential for transition metals other than platinum found in cisplatin. Nanoparticles were synthesized to show the potential for polymer based vectors. Metal loading and release were characterized via Inductively Coupled Plasma Mass Spectrometry (ICP MS), Energy Dispersive X-Ray Spectroscopy (EDX), X-Ray Photoelectron Spectroscopy (XPS), and Elemental Analysis. Targeting was attempted with the expectation of observed increased particle uptake by cancer cells with flow cytometry and fluorescence microscopy. Results demonstrated that a variety of metals could be loaded to the nano-sized carriers in an aqueous environment, and that the release was pH-dependent. Expected increased targeting was inconsistent. The toxicity of these particles was measured in cancer cells where significant toxicity was observed in vitro via dosing of high copper-loaded nanoparticles and slight toxicity was observed in ruthenium-loaded nanoparticles. No significant toxicity was observed in cells dosed with metal-free nanoparticles. Future research will focus on ruthenium loaded polymeric nanoparticles with different targeting ligands dosed to different cell lines for the aim of increased uptake and decreased cancer cell viability.
The reaction of 2-[(diphenylphosphino)methyl]-6-methylpyridine (PN) with Os3(CO)12-n(MeCN)n [where n = 0 (1), 1 (2), 2 (3)] has been investigated. Os3(CO)12 reacts with PN in the presence of Me3NO to afford the clusters Os3(CO)11(1-PN) (4) and 1,2-Os3(CO)10(1-PN)2 (5). X-ray diffraction analyses confirm the equatorial coordination of the phosphine(s) in 4 and 5, with the two phosphines in the latter cluster exhibiting a 1,2-trans orientation about the Os-Os vector that contains the two ligands. Treatment of the MeCN-substituted cluster Os3(CO)11(MeCN) and PN (1:1 ratio) in CH2Cl2 gives clusters 4 and 5, in addition to HOs3(η1-Cl)(CO)10(1-PN) (6) as a result of competitive activation of the reaction solvent. Cluster 6 contains 48e- and the diffraction structure reveals the presence of axial chloride and equatorial phosphine ligands which are located on adjacent osmium atoms. The bridging hydride ligand in 6 spans the Cl,P-substituted Os-Os vector. The reaction of Os3(CO)10(MeCN)2 with PN furnishes 5, 6, and 1,1-Os3(CO)10(2-PN) (7) in yields that are dependent on the reagent stoichiometry and reaction solvent. The solid-state structure of 7 confirms the chelation of the PN ligand to a single osmium atom via the pyridine and phosphine moieties at axial and equatorial sites, respectively. The bonding in 7 relative to other possible stereoisomers has been explored by DFT calculations, and the diffraction structure is computed as the thermodynamically most stable form of this cluster. Cluster 4 is photosensitive and CO loss gives 7, in addition to the formation of the dihydride H2Os3(CO)8[µ-CH(NC5H3)CH2PPh2] (8), whose origin derives from the double metalation of the C-6 methyl group of the PN ligand in 7. Photolysis of 7 yields 8 without detectable observation of the expected intermediate hydride HOs3(CO)9[µ-CH2(NC5H3)CH2PPh2]. The PN ligand in 7 undergoes P-C bond activation in toluene at 110 °C to afford the 50e cluster Os3(CO)9(µ-C6H4)(µ-PPh), which contains face-capping benzyne and phosphinidene …
The laser Raman spectra of tetrachlorocyclopropene in the liquid and solid phases have been recorded and vibrational assignments are presented. These results along with root mean squared vibrational amplitudes from electron diffraction data have been employed in a normal coordinate analysis in which a 19 parameter potential function is refined. This potential function, originally expressed in terms of compliance constants, is then used to derive the corresponding conventional and relaxed force constants.
The multi-reference correlation consistent composite approach (MR-ccCA) was designed to reproduce the accuracy of more computationally intensive ab initio quantum mechanical methods like MR-ACPF-DK/aug-cc-pCV?Z-DK, albeit at a significantly reduced cost. In this dissertation, the development and applications of the MR-ccCA method and a variant of its single reference equivalent (the relativistic pseudopotential ccCA method) are reported. MR-ccCA is shown to predict the energetic properties of reactive intermediates, excited states species and transition states to within chemical accuracy (i.e. ±1.0 kcal mol 1) of reliable experimental values. The accuracy and versatility of MR-ccCA are also demonstrated in the prediction of the thermochemical and spectroscopic properties (such as atomization energies, enthalpies of formation and adiabatic transition energies of spin-forbidden excited states) of a series of silicon-containing compounds. The thermodynamic and kinetic feasibilities of the oxidative addition of an archetypal arylglycerol ?-aryl ether (?-O-4 linkage) substructure of lignin to Ni, Cu, Pd and Pt transition metal atoms using the efficient relativistic pseudopotential correlation consistent composite approach within an ONIOM framework (rp-ccCA-ONIOM), a multi-level multi-layer QM/QM method formulated to enhance the quantitative predictions of the chemical properties of heavy element-containing systems larger than hitherto attainable, are also reported.
The characterization of 2,3,6,7,10,11-hexabromotriphenylene, Br6TP, is presented toward its potential use as an n-type organic semiconductor and metal-free room temperature phosphor. The crystal structure shows both anisotropic two-dimensional BrBr interactions and inter-layer ?-stacking interactions. Photophysical characteristics were evaluated using solid-state photoluminescence and diffuse reflectance spectroscopies, revealing significantly red-shifted excitations in the visible region for the yellow solid material (compared to ultraviolet absorption bands for the colorless dilute solutions). Correlation of spectral, electrochemical, and computational data suggest the presence of an n-type semiconducting behavior due to the electron-poor aromatic ring. The material shows excellent thermal stability as demonstrated by thermogravimetric analysis and infrared spectra of a thin film deposited by thermal evaporation. The potential for Br6TP and its analogues toward use in several types of photonic and electronic devices is discussed.
This dissertation is a study of two major topics that involve synthetic strategies for new classes of phosphorescent gold(I)-based metallodendrimers. The phosphorescence of organic and inorganic luminophores originates from spin-orbit coupling owing to internal or external heavy atom effects as well as metal-centered emissions. Previous work in the Omary group entailed systematically designed small molecules, metallopolymers, and unconjugated metallodendrimers that contain d10 and d8 metals, whereas this dissertation aims in part to expand such strategies to the conjugated metallodendrimer regime. In one approach novel synthetic strategies were used to make first-generation phenyl acetylene dendrimers and phosphine derivatives thereof. The phosphine dendrimers are made by tethering one of the phosphines to an unsaturated dendrimer, as such phosphine dendrimers are better chromophores and luminophores due to their structural rigidity and extended conjugation. In another approach, 2- and 3-coordinate Au(I) dendritic complexes are synthesized from these phosphine dendrimers. This study is further extended to study metallodendritic complexes with different cores, for example triphenylene-based metallodendritic complexes with six acetylene branches. The physical properties of the metallodendrimers can be modulated upon proceeding to further dendrimer generations or by using solubilizing groups on the peripheral phosphines, thus allowing better processability for thin-film fabrication as required for molecular electronic devices and higher chance for crystal growth toward accurate structural characterization. Other data produced in this project suggested that some structural alterations led to porous solids that render them suitable for realized and potential applications in energy storage and carbon capture. The interesting luminescence properties of the metallodendrimers and porous extended solids produced in this dissertation are significant toward utilizing such materials for optoelectronic applications such as energy-saving organic light-emitting diodes and optical sensors for environmental pollutants.
This study consists of four major areas of research. First, the relationship between and was extended to Lrl nil homoallylic couplings and was used to determine the relative degree of puckering in a series of dihydroaromatic carboxylic acids. Second, the effect of coupling contributions transmitted through space were examined by theoretical calculations of the intermediate neglect of differential overlap finite perturbation theory type (INDO-FPT) including selective overlap reduction experiments to determine the sign and magnitude of the major through-space contributions and the effect of the orientation of the substituent upon the vicinal carbon3 carbon coupling. Third, the dependence of the J upon substituent orientation in norbornanes was empirically investigated by the synthesis of a series of lactones and cyclic ethers whose conformation was rigid and known. Fourth, a large number of norbornanes substituted with methyls in the 1, 3, and 7 position and a carbon-13 labeled substituent in the 2 position were synthesized and studied in order to obtain a variety of vicinal C-C couplings; all the NMR parameters for this series of compounds were determined while the carbon13 labeled substituent was varied from methyl to methylene to carbinol to aldehyde and to carboxylic acid.
The body of information concerning carbon-carbon spin-spin coupling constants now includes a large number of coupling constants, the establishment of a dihedral angular dependence on 3JCC, and the application of 3JCC to conformational analysis. This study adds another dimension to the growing wealth of information associated with 13 C-NMR: the influence of some non-bonded interactions on 3JCC Four types of non-bonded interactions that could influence vicinal carbon-carbon NMR coupling constants were investigated. To facilitate the NMR studies, a variety of 13C-labeled compounds were synthesized.
The purpose of this investigation was to study the chemistry of the new and novel (trimethylsilyl)ketene. This ketene was synthesized by pyrolysis of (trimethylsilyl)ethoxyacetylene which was prepared from ethoxyacetylene and methyllithium. (Trimethylsilyl)ketene is a very stable and isolable ketene which does not dimerize and, therefore, provides an opportunity for some unique studies that have not been possible with other monosubstituted ketene.
This dialog allows you to filter your current search.
Each of the World Regions listed note their name and the number of records that will be limited down to if you choose that option.
This dialog allows you to filter your current search.
Each of the Countries listed note their name and the number of records that will be limited down to if you choose that option.
This dialog allows you to filter your current search.
Each of the U.S. States listed note their name and the number of records that will be limited down to if you choose that option.
This dialog allows you to filter your current search.
Each of the Counties listed note their name and the number of records that will be limited down to if you choose that option.
This dialog allows you to filter your current search.
Each of the Decades listed note their name and the number of records that will be limited down to if you choose that option.
This dialog allows you to filter your current search.
Each of the Years listed note their name and the number of records that will be limited down to if you choose that option.
The list can be sorted by name or the count.
This dialog allows you to filter your current search.
Each of the Months listed note their name and the number of records that will be limited down to if you choose that option.
This dialog allows you to filter your current search.
Each of the Department listed note their name and the number of records that will be limited down to if you choose that option.
This dialog allows you to filter your current search.
Each of the Discipline listed note their name and the number of records that will be limited down to if you choose that option.
This dialog allows you to filter your current search.
Each of the Degree Level listed note their name and the number of records that will be limited down to if you choose that option.