You limited your search to:

  Partner: UNT Libraries
 Degree Discipline: Electrical Engineering
Design of Multi Band Microwave Devices Using Coupled Line Transmission Lines

Design of Multi Band Microwave Devices Using Coupled Line Transmission Lines

Date: May 2015
Creator: Katakam, Sri
Description: Multi band technology helps in getting multiple operating frequencies using a single microwave device. This thesis presents the design of dual and tri band microwave devices using coupled transmission line structures. Chapter 2 presents the design of a novel dual band transmission line structure using coupled lines. In chapter 3, Design of a dual band branch line coupler and a dual band Wilkinson power divider are proposed using the novel dual band transmission line structure presented in the previous chapter. In chapter 4, Design of a tri band transmission line structure by extending the dual band structure is presented. The Conclusion and future work are presented in chapter 5.
Contributing Partner: UNT Libraries
Dual-Band Quarter Wavelength and Half Wavelength Microstrip Transmission Line Design

Dual-Band Quarter Wavelength and Half Wavelength Microstrip Transmission Line Design

Date: May 2015
Creator: Imran, Md Asheque
Description: The thesis represents the design for dual-band quarter wavelength and half wavelength microstrip transmission line. Chapter 2 proposed the design of a novel dual-band asymmetric pi-shaped short-circuited quarter wavelength microstrip transmission line working at frequencies 1GHz and 1.55 GHz for 50Ω transmission line and at frequencies 1GHz and 1.43GHz for 60Ω transmission line. Chapter 3 proposed the design of a novel dual-band quarter wavelength microstrip transmission line with asymmetrically allocated open stubs and short-circuited stubs working at frequencies 1GHz and 1.32GHz. Chapter 4 proposed the design of dual-band pi-shaped open stub half wavelength microstrip transmission line working at frequencies 1GHz and 2.07GHz. Numerical simulations are performed both in HyperLynx 3D EM and in circuit simulator ADS for all of the proposed designs to measure the return loss (S11) and insertion loss (S12) in dB and phase response for S12 in degree.
Contributing Partner: UNT Libraries
Practical Robust MIMO OFDM Communication System for High-Speed Mobile Communication

Practical Robust MIMO OFDM Communication System for High-Speed Mobile Communication

Date: May 2015
Creator: Grabner, Mitchell John James
Description: This thesis presents the design of a communication system (PRCS) which improves on all aspects of the current state of the art 4G communication system Long Term Evolution (LTE) including peak to average power ratio (PAPR), data reliability, spectral efficiency and complexity using the most recent state of the art research in the field combined with novel implementations. This research is relevant and important to the field of electrical and communication engineering because it provides benefits to consumers in the form of more reliable data with higher speeds as well as a reduced burden on hardware original equipment manufacturers (OEMs). The results presented herein show up to a 3 dB reduction in PAPR, less than 10-5 bit errors at 7.5 dB signal to noise ratio (SNR) using 4QAM, up to 3 times increased throughput in the uplink mode and 10 times reduced channel coding complexity.
Contributing Partner: UNT Libraries
Quantitative Correlation Analysis of Motor and Dysphonia Features of Parkinsons Disease

Quantitative Correlation Analysis of Motor and Dysphonia Features of Parkinsons Disease

Date: May 2015
Creator: Koduri, Balaram
Description: The research reported here deals with the early characterization of Parkinson’s disease (PD), the second most common degenerative disease of the human motor system after Alzheimer’s. PD results from the death of dopaminergic neurons in the substantia nigra region of the brain. Its occurrence is highly correlated with the aging population whose numbers increase with the healthcare benefits of a longer life. Observation of motor control symptoms associated with PD, such as gait and speech analysis, is most often used to evaluate, detect, and diagnose PD. Since speech and some delicate motor functions have provided early detection signs of PD, reliable analysis of these features is a promising objective diagnostic technique for early intervention with any remedial measures. We implement and study here three PD diagnostic methods and their correlation between each other’s results and with the motor functions in subjects diagnosed with and without PD. One initial test documented well in the literature deals with feature analysis of voice during phonation to determine dysphonia measures. Features of the motor function of two fingers were extracted in tests titled “Motor function of alternating finger tapping on a computer keyboard” and “Motor function of the index and thumb finger tapping with ...
Contributing Partner: UNT Libraries
WiFi Networks through Directional Antenna: An Experimental Study

WiFi Networks through Directional Antenna: An Experimental Study

Date: May 2015
Creator: Gu, Yixin
Description: In situations where information infrastructure is destroyed or not available, on-demand information infrastructure is pivotal for the success of rescue missions. In this paper, a drone-carried on demand information infrastructure for long-distance WiFi transmission system is developed. It can be used in the areas including emergency response, public event, and battlefield. The WiFi network can be connected to the Internet to extend WiFi access to areas where WiFi and other Internet infrastructures are not available. In order to establish a local area network to propagate WIFI service, directional antennas and wireless routers are used to create it. Due to unstable working condition on the flying drones, a precise heading turning stage is designed to maintain the two directional antennas facing to each other. Even if external interferences change the heading of the drones, the stages will automatically rotate back to where it should be to offset the bias. Also, to maintain the same flying altitude, a ground controller is designed to measure the height of the drones so that the directional antennas can communicate to each other successfully. To verify the design of the whole system, quite a few field experiments were performed. Experiments results indicates the design is reliable, ...
Contributing Partner: UNT Libraries
Networking and Decentralized Control in Layered Networks: a Theoretical Study and Test-bed Development

Networking and Decentralized Control in Layered Networks: a Theoretical Study and Test-bed Development

Date: December 2014
Creator: Sheth, Vardhman Jayeshkumar
Description: Layered structures are commonly used in communication systems, but their roles in decentralized control are not understood well. In the first part of this thesis, a theoretical study of consensus (a typical decentralized control task) in layered structures is conducted. The unique graph topology approach permits explicit characterization of consensus performance based on simple graphical characteristics of MLMG structures. In the second part of this thesis, a generic LEGO test-bed to mimic multi-domain communication with layered structures is described. A search-and-rescue scenario is implemented to demonstrate the use of the test-bed.
Contributing Partner: UNT Libraries
Optimal Sensor Placement for Structural Health Monitoring

Optimal Sensor Placement for Structural Health Monitoring

Date: December 2014
Creator: Movva, Gopichand
Description: In large-scale civil structures, a limited number of sensors are placed to monitor the health of civil structures to reduce maintenance, communication and energy costs. In this thesis, the problem of optimal sensor location placement to infer the health of civil structures is explored. First, a comparative study of approaches from the fields of control engineering and civil engineering is conducted . The widely used civil engineering approaches such as effective independence (EI) and modal assurance criterion (MAC) have limitations because of the negligence of modes and damping parameters. On the other hand, control engineering approaches consider the entire system dynamics using impulse response-type sensor measurement data. Such inference can be formulated as an estimation problem, with the dynamics formulated as a second-order differential equation. The comparative study suggests that damping dynamics play significant impact to the selection of best sensor location---the civil engineering approaches that neglect the damping dynamics lead to very different sensor locations from those of the control engineering approaches. In the second part of the thesis, an initial attempt to directly connect the topological graph of the structure (that defines the damping and stiffness matrices) and the second-order dynamics is conducted.
Contributing Partner: UNT Libraries
Reliability of Electronics

Reliability of Electronics

Date: December 2014
Creator: Wickstrom, Larry E
Description: The purpose of this research is not to research new technology but how to improve existing technology and understand how the manufacturing process works. Reliability Engineering fall under the category of Quality Control and uses predictions through statistical measurements and life testing to figure out if a specific manufacturing technique will meet customer satisfaction. The research also answers choice of materials and choice of manufacturing process to provide a device that will not only meet but exceed customer demand. Reliability Engineering is one of the final testing phases of any new product development or redesign.
Contributing Partner: UNT Libraries
An Application of Digital Video Recording and Off-grid Technology to Burrowing Owl Conservation Research

An Application of Digital Video Recording and Off-grid Technology to Burrowing Owl Conservation Research

Date: August 2014
Creator: Williams, Jennifer M.
Description: Through this research, engineering students and conservation biologists constructed an off-grid video system for observing western burrowing owls in El Paso, Texas. The burrowing owl has a declining population and their range decreasing, driving scientists' interest to see inside the den for observing critical nesting behavior. Texas Parks and Wildlife Department (TPWD) biologists wanted videos from inside the dark, isolated hillside owl burrows. This research yielded a replicable multi-camera prototype, empowering others to explore applications of engineering and wildlife monitoring. The remote station used an off-the-shelf video recording system, solar panels, charge controller, and lead acid batteries. Four local K-12 science educators participated in system testing at Lake Ray Roberts State Park through the Research Experiences for Teachers (RET, NSF #1132585) program, as well as four undergraduate engineering students as senior design research.
Contributing Partner: UNT Libraries
Design Space Exploration of Domain Specific Cgras Using Crowd-sourcing

Design Space Exploration of Domain Specific Cgras Using Crowd-sourcing

Date: August 2014
Creator: Sistla, Anil Kumar
Description: CGRAs (coarse grained reconfigurable array architectures) try to fill the gap between FPGAs and ASICs. Over three decades, the research towards CGRA design has produced number of architectures. Each of these designs lie at different points on a line drawn between FPGAs and ASICs, depending on the tradeoffs and design choices made during the design of architectures. Thus, design space exploration (DSE) takes a very important role in the circuit design process. In this work I propose the design space exploration of CGRAs can be done quickly and efficiently through crowd-sourcing and a game driven approach based on an interactive mapping game UNTANGLED and a design environment called SmartBricks. Both UNTANGLED and SmartBricks have been developed by our research team at Reconfigurable Computing Lab, UNT. I present the results of design space exploration of domain-specific reconfigurable architectures and compare the results comparing stripe vs mesh style, heterogeneous vs homogeneous. I also compare the results obtained from different interconnection topologies in mesh. These results show that this approach offers quick DSE for designers and also provides low power architectures for a suite of benchmarks. All results were obtained using standard cell ASICs with 90 nm process.
Contributing Partner: UNT Libraries
FIRST PREV 1 2 3 4 5 NEXT LAST