UNT Libraries - 134 Matching Results

Search Results

Results: 1 - 24 next
open access

A Proposed Industrial Arts General Shop Curriculum for Pauline G. Hughes Middle School, Burleson Independent School District

Description: This study was made to gather data and information to aid the Burleson Independent School District in initiating an industrial arts general shop program in the Pauline G. Hughes Middle School. The data and information were obtained from the Texas Education Agency, the Burleson Independent School District records, the vocational director, the assistant superintendent, a questionnaire, and the Brodhead-Garrett 1976-1977 Catalog. The majority of the general shop programs in the north Texas area co… more
Date: May 1978
Creator: Adams, William Leroy.
Item Type: Refine your search to only Thesis or Dissertation
open access

A Study of Modern Automotive Tune-Up Equipment Used in Fort Worth, Texas

Description: The problem with which this investigation was concerned was that of determining the use of modern automotive tune-up equipment as used by the automotive garages in the Fort Worth area. The data for this study were provided by fifteen garages of the Fort Worth area. Of the Fort Worth garages using electronic equipment to perform a tune-up, few appear to have the adequate equipment and few appear to make more use of the equipment. In addition, a deficiency seems evident in the use of the electron… more
Date: August 1977
Creator: Shabbot, Kadhum
Item Type: Refine your search to only Thesis or Dissertation
open access

A Study of the Foundry Metals in the High Schools in Texas

Description: The problem of this study was to determine the type of metals used in the foundries in the high schools of Texas and the treatment of these metals. The data for this study were provided by thirty metalworking instructors of Texas high schools. Of the Texas high schools offering foundry as part of their metalworking curriculum, all included aluminum as a basic metal. In addition, the amount of metals used and their treatment varied from school to school.
Date: August 1977
Creator: Underhill, Jerry L.
Item Type: Refine your search to only Thesis or Dissertation
open access

A Study of Safety in the Industrial Plastics Laboratories in the Secondary Schools of the Fort Worth Independent School District

Description: This study was conducted in order to determine what safety practices and procedures were employed in the industrial plastics laboratories in the secondary schools of the Fort Worth Independent School District. Data were obtained from literature in the field of safety education in industrial arts and from an information form mailed to the teachers of industrial plastics in the Fort Worth Independent School District. Hazardous conditions were found to exist in a majority of the laboratories due … more
Date: August 1976
Creator: Curtis, Ronald W.
Item Type: Refine your search to only Thesis or Dissertation
open access

Foundry Facilities in Industrial Arts Programs in the State of Texas

Description: The problem of this study was to determine how much foundry equipment exists in the high schools of Texas and to determine to what extent it is being utilized. The data for this study were provided by thirty-seven metalworking instructors of Texas high schools. Of the Texas high schools offering metalworking as a part of the industrial arts curriculum, few appear to have adequate foundry facilities. In addition, a deficiency seems evident in the background and training in foundry of the metalwo… more
Date: May 1976
Creator: Lange, Robert Douglas
Item Type: Refine your search to only Thesis or Dissertation
open access

Skills and Knowledge Required of Employees in the Steel Fabrication Industry in the Greater Fort Worth Metropolitan Area

Description: This study was designed to determine the employment opportunities in the steel fabrication industry of the Greater Fort Worth Metropolitan Area, and to ascertain what skills and knowledge were required of the prospective employee and which of these skills were being taught in the Industrial Arts metalworking laboratories. The Machine Metalworking I & II curriculum was established and related to information gained through a questionnaire sent to participating steel fabrication firms. The study w… more
Date: May 1976
Creator: McPeak, W. Dennis
Item Type: Refine your search to only Thesis or Dissertation
open access

A Comparative Analysis of the Need for Various Knowledge and Skills in Plastics as Viewed by Texas High School Plastic Teachers and Texas Plastics Industries

Description: This was a comparative study in which Texas teachers of industrial plastics and the employers of Texas plastic industries were surveyed in order to evaluate the need for various knowledge and skills of the plastics industry. The respondents believed that basic knowledge of plastics was much needed, and knowledge of the thermoplastic family is of more importance than of the thermoset family. It was also concluded that knowledge of demonstration skills is of only average or lesser importance than… more
Date: December 1975
Creator: Reeve, Edward Lee
Item Type: Refine your search to only Thesis or Dissertation
open access

Selecting Technical Competencies for Beginning Industrial Arts Woodworking Teachers in a Competency-Based eacher Education Program

Description: The problem was to identify the technical competencies necessary for beginning industrial arts woodworking teachers in Texas public secondary schools. Twenty-seven clusters of competencies were listed on a questionnaire sent to ninety-one supervisors of industrial arts in eighty-six Texas school districts requesting that these supervisors evaluate each cluster as "Essential," "Desirable," or "Unnecessary." Sixty-six questionnaires were returned (72.53 percent). A weighted rating scale was used … more
Date: December 1975
Creator: Hay, William C.
Item Type: Refine your search to only Thesis or Dissertation
open access

A Proposed Course of Study for Industrial Arts Power Technology for Ninth Grade in Texas Schools

Description: The purpose of this study was to determine topics being taught by power technology instructors in Texas and to develop a curriculum from these topics. This curriculum was meant to be a guide for a power technology course for the ninth grade. Questionnaires were distributed to power technology instructors in Texas. The topics from these questionnaires which instructors indicated they were teaching or they believed should be included in instructional content were made a part of the power technolo… more
Date: August 1975
Creator: White, James Donald
Item Type: Refine your search to only Thesis or Dissertation
open access

A Study to Identify the Essential Furniture and Equipment Needed for Instructional Programs in Industrial Arts in Grades Seven and Eight in Texas Public Schools

Description: The purpose of this study was to identify the essential furniture and equipment needed for instructional programs in industrial arts in grades seven and eight in Texas public schools. The study includes a brief history of federal and state legislation affecting industrial arts and vocational education. A checklist containing items of furniture and equipment applicable to each of the twelve approved areas of Introductory General Shop in grades seven and eight was sent to industrial arts teachers… more
Date: August 1975
Creator: Sibley, Sam W.
Item Type: Refine your search to only Thesis or Dissertation
open access

The Public Image of Industrial Arts in Dallas, Texas

Description: The purpose of this study is to determine the public image of industrial arts education in Dallas, Texas. Information sought is obtained from interview schedules using random sampling techniques. The results of the study indicate that the public is not generally informed about industrial arts education. It is recommended that the public be informed as to the difference between industrial arts and vocational education. It is also recommended that more girls be introduced to industrial arts. It i… more
Date: December 1974
Creator: Jones, Marley C.
Item Type: Refine your search to only Thesis or Dissertation
open access

A Survey to Ascertain the Assignments for an Eighteen-Week Curriculum for the World of Construction

Description: The purpose of this study was to ascertain which assignments from the course outline for The World of Construction should be deleted, retained, or combined with each other to form the curriculum for an eighteen-week construction technology curriculum. The study contains a brief descriptive account of the development of the Industrial Arts Curriculum Project. Questionnaires asking for the opinions of experienced teachers of The World of Construction were distributed in the Dallas and Fort Worth,… more
Date: December 1974
Creator: Humphrey, Joe W.
Item Type: Refine your search to only Thesis or Dissertation
open access

The Impact of Expanding Technical Knowledge on the Beginning Industrial Arts Teacher

Description: This study measures technical preparation and job demands among North Texas State University industrial arts graduates teaching in high schools. In addition to data from professional literature and the NTSU Bulletin, questionnaire mailings reveal that most graduates consider themselves qualified although recommending more semester hours of industrial arts for certification. They also affirm the practical value to the teacher of experience in industry. The study recommends narrowing the number o… more
Date: August 1974
Creator: McCulley, Charles R.
Item Type: Refine your search to only Thesis or Dissertation
open access

A Study of the Knowledge and Skills of Mobile Home Metalworkers in the Dallas-Fort Worth Area

Description: The purpose of this study was to determine the required knowledge and skills of mobile home metalworkers in the Dallas-Fort Worth area as compared to the Industrial Arts metalworking curriculum presented in Texas Education Agency, Bulletin 615. Items of significance in Chapter IV appear in findings, conclusions, and recommendations. The "use of basic hand tools" and "safety concepts" were consistently emphasized and required by manufacturing firms. It was found that educational requirements wer… more
Date: May 1974
Creator: Cosper, Larry T.
Item Type: Refine your search to only Thesis or Dissertation
open access

A Study of the Drafting Curriculum in the Fort Worth Public High Schools, Fort Worth, Texas

Description: This is a study of the drafting curriculum in the Fort Worth public high schools, Fort Worth, Texas.The specific purposes or the study were as follows: 1. To review and compare the courses and content of the drafting curriculums listed in the bulletins of the TEA and the Fort Worth Public Schools. 2. To study drafting scheduling procedures in each of the Fort Worth public high schools. 3. To study the courses and contents of the drafting curriculums offered in each of the Fort Worth public h… more
Date: December 1973
Creator: Agee, David W.
Item Type: Refine your search to only Thesis or Dissertation
open access

The Extent to Which Work and Training Beyond High School are Influenced by Industrial Arts

Description: The purpose of this study was to determine the influence industrial arts had on post-high school students in regard to their present field of work or study. The respondents were working in or pursuing additional education in fields directly related to the industrial arts courses they took in high school.
Date: August 1973
Creator: Brooks, Bill D.
Item Type: Refine your search to only Thesis or Dissertation
open access

A Study of Contemporary Industrial Arts Education and Industrial Technology Education Programs

Description: This study is an investigation of the baccalaureate degree requirements in industrial arts education and industrial technology education with special emphasis on the similarities and differences between the two curriculums. The criteria used as a basis for comparison are (1) clarification of terminology, (2) historical trends in the development of the present programs, (3) basic program philosophies, (4) curriculum content, (5) objectives sought by each curriculum, (6) number of graduates from … more
Date: August 1973
Creator: Russum, Isaac J.
Item Type: Refine your search to only Thesis or Dissertation
open access

A Study of the Skills and Knowledge Required of Plastics Employees in the Dallas Metropolitan Area

Description: The primary purpose of this study was to identify the skills and knowledge required of employees in the plastics industry in the Dallas Metropolitan area. An instrument was utilized to obtain data in order to identify various skills and knowledge. This study was limited to fifteen instruments returned by fifteen participating firms in the Dallas Metropolitan area. A comparison was made of the industrial arts plastics course offerings in the Dallas Metropolitan area schools with the requirements… more
Date: August 1973
Creator: Mack, Clarence
Item Type: Refine your search to only Thesis or Dissertation
open access

A Descriptive Approach to the Development and Implementation of Career Education in the Dallas Independent School System

Description: The problem of this study is to provide a descriptive analysis of research in career-oriented education and a plan of procedure to implement it in the Dallas Independent School District. The first part presents the inception of the career education program, the concept and components of career education, and the scope and goals of career education. The second part division discusses career education precursors and overviews of selected existing programs. The final portion of the study deals wit… more
Date: May 1973
Creator: Kile, Robert Dewayne
Item Type: Refine your search to only Thesis or Dissertation
open access

A Study of Girls' Involvement in Industrial Arts in Texas

Description: "This study was conducted to find the extent to which girls are involved in industrial arts classes and related activities in Texas public schools, the factors which limit their enrollment, and teachers' opinions concerning industrial arts experiences most beneficial for girls. Data were obtained from bulletins, books, magazines, related studies, and from information forms completed by 123 industrial arts teachers....Among the more important findings were: 1. Girls tend to enroll in certain are… more
Date: May 1973
Creator: Work, Charles W.
Item Type: Refine your search to only Thesis or Dissertation
open access

A Study of the Methods Used in the Purchasing, Storing, Budgeting, Accounting, Distributing, and Inventorying of Industrial Arts Woodworking Materials in Selected High Schools in the State of Texas

Description: This study was conducted to determine the methods used in the purchasing, storing, budgeting, accounting, distributing, and inventorying of woodworking materials by industrial arts instructors in secondary schools in the state of Texas.
Date: May 1973
Creator: Gomez, Hervey
Item Type: Refine your search to only Thesis or Dissertation
open access

Drafting in Texas: A Survey of Course Content as It Related to Teacher Usage of Information Compiled by the Texas Education Agency

Description: This study measures the extent to which the Texas Education Agency's 1963 monograph on drafting, Drafting, Grades 7-12, A Tentative Bulletin, is used in the state's secondary schools and its effects upon classroom activities. Information for the study comes from a questionnaire completed by a random selection of seventy-eight drafting instructors.
Date: December 1972
Creator: Crutchfield, J. Stuart
Item Type: Refine your search to only Thesis or Dissertation
open access

The Extent to which Texas High School Woodworking Laboratories Comply with Standards of the Texas Occupational Safety Board

Description: The purpose of this study is threefold: (1) to identify and compile recommended safety standards for woodworking laboratories concerning guarding of machines, electrical wiring, fire prevention, flooring materials, and aisles; (2) to identify the standards that pertain to the physical facility and equipment used in industrial arts laboratories and to make them available to teachers and administrators for use in renovation of existing facilities and planning new ones; and (3) to determine the ex… more
Date: December 1972
Creator: Moss, Joe C.
Item Type: Refine your search to only Thesis or Dissertation
open access

A Study of the Physical Facilities of Industrial Arts Metalworking Laboratories in the State of Texas

Description: The purposes for conducting this study were to ascertain whether the housing for industrial arts metalworking laboratories was adequate, whether the enrollment of the school showed any correlation with the availability of a metalworking facility, and to what extent the physical facility for metalworking laboratories met current standards.
Date: December 1972
Creator: Teague, Ben W.
Item Type: Refine your search to only Thesis or Dissertation
Back to Top of Screen