UNT Libraries - 84 Matching Results

Search Results

Results: 1 - 24 next
open access

Hydraulic Activity in Synthetic and Commercial Slags

Description: Slag, by itself, shows very little hydraulic activity. However, hydration is greatly accelerated by incorporation of the slag with Portland cement. This phenomenon is due to the activating role of calcium hydroxide released from the hydration of Portland cement. This study was aimed at finding other activators that will increase hydration in both synthetic and commercial slags. The effects of chemical composition and the aggregation state of the slag on the hydration process were also investiga… more
Date: May 1982
Creator: Saad, Bahruddin bin
Item Type: Refine your search to only Thesis or Dissertation
open access

Brainstem Lipids' Relationship to Death

Description: Previous work relating postmortem findings with cause of death have focused on the vitreous portion of the body. This research investigated the link between phospholipids in the brainstem and cause of death. The lipids were extracted by the Folch extraction method and then separated by High Performance Thin Layer Chromatography. These techniques gave excellent separation and resolution. Results showed no link between cause of death and the type of lipids found in the brainstem after death.
Date: December 1982
Creator: Schrynemeeckers, Patrick J.
Item Type: Refine your search to only Thesis or Dissertation
open access

The Quantitative Determination of Glass in Slag and Fly Ash by Infrared Spectroscopy

Description: The present study was aimed at developing a new inexpensive and accurate analytical method for determining the glass content of slag and fly ash. Infrared absorption spectroscopy using an internal standard proved to be the method of choice. Both synthetic and commercial slags and fly ashes were investigated.
Date: December 1983
Creator: Eberendu, Alexis N. R.
Item Type: Refine your search to only Thesis or Dissertation
open access

Methods Development for Simultaneous Determination of Anions and Cations by Ion Chromatography

Description: The problem with which this research is concerned is the determination of inorganic anions and cations with single injection ion chromatography. Direct detection of the separated analyte ions occurs after the analyte ions have passed through ion-exchange resins where they are separated according to their affinity for the ion-exchange resin active sites. The techniques involve the use of essentially a non-suppressed ion chromatographic system followed by a suppressed ion chromatographic system. … more
Date: May 1987
Creator: Jones, Vonda K. (Vonda Kaye)
Item Type: Refine your search to only Thesis or Dissertation
open access

Calcium Silicates: Glass Content and Hydration Behavior

Description: Pure, MgO doped and B2C3 doped monocalcium, dicalcium, and tricalcium silicates were prepared with different glass contents. Characterization of the anhydrous materials was carried out using optical microscopy, infrared absorption spectroscopy, and X-ray powder diffraction. The hydration of these compounds was studied as a function of the glass contents. The hydration studies were conducted at 25°C. Water/solid ratios of 0.5, 1, 10, and 16 were used for the various experiments. The hydration be… more
Date: August 1987
Creator: Zgambo, Thomas P. (Thomas Patrick)
Item Type: Refine your search to only Thesis or Dissertation
open access

Model Development for the Catalytic Calcination of Calcium Carbonate

Description: Lime is one of the largest manufactured chemicals in the United States. The conversion of calcium carbonate into calcium oxide is an endothermic reaction and requires approximately two to four times the theoretical quantity of energy predicted from thermodynamic analysis. With the skyrocketing costs of fossil fuels, how to decrease the energy consumption in the calcination process has become a very important problem in the lime industry. In the present study, many chemicals including lithium ca… more
Date: December 1987
Creator: Huang, Jin-Mo
Item Type: Refine your search to only Thesis or Dissertation
open access

Analysis of PAH and PCB Emissions from the Combustion of dRDF and the Nondestructive Analysis of Stamp Adhesives

Description: This work includes two unrelated areas of research. The first portion of this work involved combusting densified refuse derived fuel (dRDF) with coal and studying the effect that Ca(0H)2 binder had on reducing polycyclic aromatic hydrocarbon (PAH) and polychlorinated biphenyl (PCB) emissions. The second area of work was directed at developing nondestructive infrared techniques in order to aid in the analysis of postage stamp adhesives. With Americans generating 150-200 million tons a year of Mu… more
Date: May 1989
Creator: Poslusny, Matthew
Item Type: Refine your search to only Thesis or Dissertation
open access

The Analysis of PCDD and PCDF Emissions from the Cofiring of Densified Refuse Derived Fuel and Coal

Description: The United States leads the world in per capita production of Municipal Solid Waste (MSW), generating approximately 200 million tons per year. By 2000 A.D. the US EPA predicts a 20% rise in these numbers. Currently the major strategies of MSW disposal are (i) landfill and (ii) incineration. The amount of landfill space in the US is on a rapid decline. There are -10,000 landfill sites in the country, of which only 65-70% are still in use. The Office of Technology Assessment (OTA) predicts an 80%… more
Date: August 1990
Creator: Moore, Paul, 1962-
Item Type: Refine your search to only Thesis or Dissertation
open access

Comparison of 43Sn/43Pb/14Bi Solder and Standard 60Sn/40Pb Solder by Thermocyclic Fatigue Analysis

Description: The thermocyclic fatigue behavior of the low-melting solder 43Sn/43Pb/14Bi has been investigated and compared to that of standard 60Sn/4OPb solder via metallographic analysis (using scanning electron microscopy) and evaluation of the degree of fatigue development (using a fatigue scale as a function of thermocycles). Specimens were subjected to shearing strains imposed by several hundred fatigue thermocycles. Both solder types fatigue by the same microstructural failure mechanism as described b… more
Date: August 1991
Creator: Calderon, Jose Guadalupe
Item Type: Refine your search to only Thesis or Dissertation
open access

Selectivity Failure in the Chemical Vapor Deposition of Tungsten

Description: Tungsten metal is used as an electrical conductor in many modern microelectronic devices. One of the primary motivations for its use is that it can be deposited in thin films by chemical vapor deposition (CVD). CVD is a process whereby a thin film is deposited on a solid substrate by the reaction of a gas-phase molecular precursor. In the case of tungsten chemical vapor deposition (W-CVD) this precursor is commonly tungsten hexafluoride (WF6) which reacts with an appropriate reductant to yield … more
Date: August 1994
Creator: Cheek, Roger W. (Roger Warren)
Item Type: Refine your search to only Thesis or Dissertation
open access

Electrodeposition of Diamond-like Carbon Films

Description: Electrodeposition of diamond-like carbon (DLC) films was studied on different substrates using two different electrochemical methods. The first electrochemical method using a three-electrode system was studied to successfully deposit hydrogenated DLC films on Nickel, Copper and Brass substrates. The as-deposited films were characterized by scanning electron microscopy (SEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), fourier transform infrared spectroscopy (FTIR) and cyclic vol… more
Date: August 2002
Creator: Chen, Minhua
Item Type: Refine your search to only Thesis or Dissertation
open access

Hydrogen terminated silicon surfaces: Development of sensors to detect metallic contaminants and stability studies under different environments

Description: Hydrogen terminated silicon surfaces have been utilized to develop sensors for semiconductor and environmental applications. The interaction of these surfaces with different environments has also been studied in detail. The sensor assembly relevant to the semiconductor industry utilizes a silicon-based sensor to detect trace levels of metallic contaminants in hydrofluoric acid. The sensor performance with respect to two non-contaminating reference electrode systems was evaluated. In the fi… more
Date: August 2002
Creator: Ponnuswamy, Thomas Anand
Item Type: Refine your search to only Thesis or Dissertation
open access

Copper Electrodeposition on Iridium, Ruthenium and Its Conductive Oxide Substrate

Description: The aim of this thesis was to investigate the physical and electrochemical properties of sub monolayer and monolayer of copper deposition on the polycrystalline iridium, ruthenium and its conductive oxide. The electrochemical methods cyclic voltammetry (CV) and chronocoulometry were used to study the under potential deposition. The electrochemical methods to oxidize the ruthenium metal are presented, and the electrochemical properties of the oxide ruthenium are studied. The full range of … more
Date: December 2003
Creator: Huang, Long
Item Type: Refine your search to only Thesis or Dissertation
open access

Fabrication and light scattering study of multi-responsive nanostructured hydrogels and water-soluble polymers.

Description: Monodispersed microgels composed of poly-acrylic acid (PAAc) and poly(N-isopropylacrylamide) (PNIPAM) interpenetrating networks were synthesized by 2-step method with first preparing PNIPAM microgel and then polymerizing acrylic acid that interpenetrates into the PNIPAM network. The semi-dilute aqueous solutions of the PNIPAM-PAAc IPN microgels exhibit an inverse thermo-reversible gelation. Furthermore, IPN microgels undergo the reversible volume phase transitions in response to both pH and tem… more
Date: December 2003
Creator: Xia, Xiaohu
Item Type: Refine your search to only Thesis or Dissertation
open access

Interfacial Electrochemistry and Surface Characterization: Hydrogen Terminated Silicon, Electrolessly Deposited Palladium & Platinum on Pyrolyzed Photoresist Films and Electrodeposited Copper on Iridium

Description: Hydrogen terminated silicon surfaces play an important role in the integrated circuit (IC) industry. Ultra-pure water is extensively used for the cleaning and surface preparation of silicon surfaces. This work studies the effects of ultra-pure water on hydrogen passivated silicon surfaces in a short time frame of 120 minutes using fourier transform infrared spectroscopy – attenuated total reflection techniques. Varying conditions of ultra-pure water are used. This includes dissolved oxygen poor… more
Date: December 2003
Creator: Chan, Raymond
Item Type: Refine your search to only Thesis or Dissertation
open access

Study of Interactions Between Diffusion Barrier Layers and Low-k Dielectric Materials for Copper/Low-k Integration

Description: The shift to the Cu/low-k interconnect scheme requires the development of diffusion barrier/adhesion promoter materials that provide excellent performance in preventing the diffusion and intermixing of Cu into the adjacent dielectrics. The integration of Cu with low-k materials may decrease RC delays in signal propagation but pose additional problems because such materials are often porous and contain significant amounts of carbon. Therefore barrier metal diffusion into the dielectric and the… more
Date: December 2003
Creator: Tong, Jinhong
Item Type: Refine your search to only Thesis or Dissertation
open access

Adherence/Diffusion Barrier Layers for Copper Metallization: Amorphous Carbon:Silicon Polymerized Films

Description: Semiconductor circuitry feature miniaturization continues in response to Moore 's Law pushing the limits of aluminum and forcing the transition to Cu due to its lower resistivity and electromigration. Copper diffuses into silicon dioxide under thermal and electrical stresses, requiring the use of barriers to inhibit diffusion, adding to the insulator thickness and delay time, or replacement of SiO2 with new insulator materials that can inhibit diffusion while enabling Cu wetting. This stu… more
Date: May 2004
Creator: Pritchett, Merry
Item Type: Refine your search to only Thesis or Dissertation
open access

Reactivity of Oxide Surfaces and Metal-Oxide Interfaces: Effects of Water Vapor Pressure on Ultrathin Aluminum Oxide Films, and Studies of Platinum Growth Modes on Ultrathin Oxide Films and Their Effects on Adhesion

Description: The reactivity of oxide surfaces and metal-oxide interfaces play an important role in many technological applications such as corrosion, heterogeneous catalysis, and microelectronics. The focus of this research was (1) understanding the effects of water vapor exposure of ultrathin aluminum oxide films under non-ultrahigh vacuum conditions (>10-9 Torr) and (2) characterization of Pt growth modes on ultrathin Ta silicate and silicon dioxide films and the effects of growth modes on adhesion of a … more
Date: May 2004
Creator: Garza, Michelle
Item Type: Refine your search to only Thesis or Dissertation
open access

Synthesis and study of crystalline hydrogels, guided by a phase diagram.

Description: Monodispersed nanoparticles of poly-N-isopropylacrylamide-co-allylamine (PNIPAM-co-allylamine) and PNIPAM-co-acrylic acid (AA) have been synthesized and used as building blocks for creating three-dimensional networks. The close-packed PNIPAM-co-allylamine and PNIPAM-co-AA nanoparticles were stabilized by covalently bonding neighboring particles at room temperature and at neutral pH; factors which make these networks amicable for drug loading and release. Controlled release studies have been pe… more
Date: December 2004
Creator: Huang, Gang
Item Type: Refine your search to only Thesis or Dissertation
open access

Tantalum- and ruthenium-based diffusion barriers/adhesion promoters for copper/silicon dioxide and copper/low κ integration.

Description: The TaSiO6 films, ~8Å thick, were formed by sputter deposition of Ta onto ultrathin SiO2 substrates at 300 K, followed by annealing to 600 K in 2 torr O2. X-ray photoelectron spectroscopy (XPS) measurements of the films yielded a Si(2p) binding energy at 102.1 eV and Ta(4f7/2) binding energy at 26.2 eV, indicative of Ta silicate formation. O(1s) spectra indicate that the film is substantially hydroxylated. Annealing the film to > 900 K in UHV resulted in silicate decomposition to SiO2 and Ta2… more
Date: December 2004
Creator: Zhao, Xiaopeng
Item Type: Refine your search to only Thesis or Dissertation
open access

Chemistry, Detection, and Control of Metals during Silicon Processing

Description: This dissertation focuses on the chemistry, detection, and control of metals and metal contaminants during manufacturing of integrated circuits (ICs) on silicon wafers. Chapter 1 begins with an overview of IC manufacturing, including discussion of the common aqueous cleaning solutions, metallization processes, and analytical techniques that will be investigated in subsequent chapters. Chapter 2 covers initial investigations into the chemistry of the SC2 clean - a mixture of HCl, H2O2, and DI wa… more
Date: May 2005
Creator: Hurd, Trace Q.
Item Type: Refine your search to only Thesis or Dissertation
open access

Interfacial Study of Copper Electrodeposition with the Electrochemical Quartz Crystal Microbalance (EQCM)

Description: The electrochemical quartz crystal microbalance (EQCM) has been proven an effective mean of monitoring up to nano-scale mass changes related to electrode potential variations at its surface. The principles of operation are based on the converse piezoelectric response of quartz crystals to mass variations on the crystal surface. In this work, principles and operations of the EQCM and piezo-electrodes are discussed. A conductive oxide, ruthenium oxide (RuO2) is a promising material to be used as … more
Date: May 2005
Creator: Ojeda Mota, Oscar Ulises
Item Type: Refine your search to only Thesis or Dissertation
open access

Metal Oxide Reactions in Complex Environments: High Electric Fields and Pressures above Ultrahigh Vacuum

Description: Metal oxide reactions at metal oxide surfaces or at metal-metal oxide interfaces are of exceptional significance in areas such as catalysis, micro- and nanoelectronics, chemical sensors, and catalysis. Such reactions are frequently complicated by the presence of high electric fields and/or H2O-containing environments. The focus of this research was to understand (1) the iron oxide growth mechanism on Fe(111) at 300 K and 500 K together with the effect of high electric fields on these iron oxide… more
Date: August 2005
Creator: Qin, Feili
Item Type: Refine your search to only Thesis or Dissertation
open access

Process Evaluation and Characterization of Tungsten Nitride as a Diffusion Barrier for Copper Interconnect Technology

Description: The integration of copper (Cu) and dielectric materials has been outlined in the International Technology Roadmap for Semiconductors (ITRS) as a critical goal for future microelectronic devices. A necessity toward achieving this goal is the development of diffusion barriers that resolve the Cu and dielectric incompatibility. The focus of this research examines the potential use of tungsten nitride as a diffusion barrier by characterizing the interfacial properties with Cu and evaluating its p… more
Date: August 2005
Creator: Ekstrom, Bradley Mitsuharu
Item Type: Refine your search to only Thesis or Dissertation
Back to Top of Screen