Search Results

Novel Carborane Derived Semiconducting Thin Films for Neutron Detection and Device Applications
Novel carborane (B10C2H12) and aromatic compounds (benzene, pyridine, diaminobenzene) copolymers and composite materials have been fabricated by electron beam induced cross-linking and plasma enhanced chemical vapor deposition (PECVD) respectively. Chemical and electronic structure of these materials were studied using X-ray and ultra-violet photoelectron spectroscopy (XPS and UPS). UPS suggest that the systematic tuning of electronic structure can be achieved by using different aromatic compounds as co-precursors during the deposition. Furthermore, top of valence band is composed of states from the aromatic moieties implying that states near bottom of the conduction band is derived from carborane moieties. Current- voltage (I-V) measurements on the ebeam derived B10C2HX: Diaminobenzene films suggest that these films exhibit enhanced electron hole separation life time. Enhanced electron hole separation and charge transport are critical parameters in designing better neutron voltaic devices. Recently, PECVD composite films of ortho-carborane and pyridine exhibited enhanced neutron detection efficiency even under zero bias compared to the pure ortho-carborane derived films. This enhancement is most likely due to longer electron-hole separation, better charge transport or a combination of both. The studies determining the main factors for the observed enhanced neutron detection are in progress by fabricating composite films of carborane with other aromatic precursors and by altering the plasma deposition conditions. This research will facilitate the development of highly sensitive and cost effective neutron detectors, and has potential applications in spintronics and photo-catalysis.
Electrochemical Synthesis and Applications of Layered Double Hydroxides and Derivatives
Layered double hydroxides (LDH) are a class of anionic clay with alternating layers of positive and negative charge. A metal hydroxide layer with divalent and trivalent metals with a positive charge is complemented by an interlayer region containing anions and water with a negative charge. The anions can be exchanged under favorable conditions. Hydrotalcite (Mg6Al2(OH)16[CO3]·4H2O) and other variations are naturally occurring minerals. Synthetic LDH can be prepared as a powder or film by numerous methods. Synthetic LDH is used in electrode materials, adsorbents, nuclear waste treatment, drug delivery systems, water treatment, corrosion protection coatings, and catalysis. In this dissertation Zn-Al-NO3 derivatives of zaccagnaite (Zn4Al2(OH)12[CO3]·3H2O) are electrochemically synthesized as films and applied to sensing and corrosion resistance applications. First, Zn-Al-NO3 LDH was potentiostatically electrosynthesized on glassy carbon substrates and applied to the electrochemical detection of gallic acid and caffeic acid in aqueous solutions. The modified electrode was then applied to the detection of gallic acid in green tea samples. The focus of the work shifts to corrosion protection of stainless steel. Modified zaccagnaite films were electrodeposited onto stainless steel in multiples layers to reduce defects caused by drying of the films. The films were deposited using a step potential method. The corrosion resistance of the films in a marine environment was investigated while immersed in 3.5 wt.% NaCl environments. Next modified zaccagnaite films were potentiostatically electrodeposited onto stainless steel followed by a hydrophobization reaction with palmitic acid in order to prepare superhydrophobic (>150° contact angle) surfaces. Each parameter of the film synthesis was optimized to produce a surface with the highest possible contact angle. The fifth chapter examines the corrosion resistance of the optimized superhydrophobic film and a hydrophobic film. The hydrophobic film is prepared using the same procedure as the superhydrophobic film except for a difference in electrodeposition potential. The …
Determination of Solute Descriptors for Illicit Drugs Using Gas Chromatographic Retention Data and Abraham Solvation Model
In this experiment, more than one hundred volatile organic compounds were analyzed with the gas chromatograph. Six capillary columns ZB wax plus, ZB 35, TR1MS, TR5, TG5MS and TG1301MS with different polarities have been used for separation of compounds and illicit drugs. The Abraham solvation model has five solute descriptors. The solute descriptors are E, S, A, B, L (or V). Based on the six stationary phases, six equations were constructed as a training set for each of the six columns. The six equations served to calculate the solute descriptors for a set of illicit drugs. Drugs studied are nicotine (S= 0.870, A= 0.000, B= 1.073), oxycodone(S= 2.564. A= 0.286, B= 1.706), methamphetamine (S= 0.297, A= 1.570, B= 1.009), heroin (S=2.224, A= 0.000, B= 2.136) and ketamine (S= 1.005, A= 0.000, B= 1.126). The solute property of Abraham solvation model is represented as a logarithm of retention time, thus the logarithm of experimental and calculated retention times is compared.
Molecules and Materials for Excitonic Solar Cells Using P-type Metal Oxide Semiconductors
This dissertation has two intersecting foci; firstly, the discovery of a new methodology for the growth of high surface area cuprous oxide (Cu2O) substrates. Secondly, the synthesis and characterization of electron-accepting molecules, and their incorporation into excitonic solar cells (XSCs) using the Cu2O substrates as electrodes. Increasing the surface area of the semiconductor creates more locations for charge transfer to occur thus increasing the overall efficiency of the device. Zinc oxide (ZnO) has been widely studied, and can be easily grown into many different films with high surface area morphologies. The ZnO films serve as sacrificial templates that allow us to electrochemically grow new semiconductors with the same high surface area morphologies but composed of a material having more desirable electronic properties. A polymer can be applied over the surface of the ZnO nanorod films before etching the ZnO with a weak acid, thereby leaving a polymer nanopore membrane. Cathodic electrodeposition of Cu2O into the membrane nanopores gives Cu2O nanorods. Electron-accepting dyes are designed with tethers that allow for direct attachment to metal oxide semiconductors. After soaking, the semiconductor is coated with a monolayer of a dye and then the coated semiconductor films were made into various dye-sensitized solar cells (DSCs). These cells were studied to determine the electron transport properties at the semiconductor/sensitizer/electrolyte interface.
Application of the Correlation Consistent Composite Approach to Biological Systems and Noncovalent Interactions
Advances in computing capabilities have facilitated the application of quantum mechanical methods to increasingly larger and more complex chemical systems, including weakly interacting and biologically relevant species. One such ab initio-based composite methodology, the correlation consistent composite approach (ccCA), has been shown to be reliable for the prediction of enthalpies of formation and reaction energies of main group species in the gas phase to within 1 kcal mol-1, on average, of well-established experiment, without dependence on experimental parameterization or empirical corrections. In this collection of work, ccCA has been utilized to determine the proton affinities of deoxyribonucleosides within an ONIOM framework (ONIOM-ccCA) and to predict accurate enthalpies of formation for organophosphorus compounds. Despite the complexity of these systems, ccCA is shown to result in enthalpies of formation to within ~2 kcal mol-1 of experiment and predict reliable reaction energies for systems with little to no experimental data. New applications for the ccCA method have also been introduced, expanding the utility of ccCA to solvated systems and complexes with significant noncovalent interactions. By incorporating the SMD solvation model into the ccCA formulation, the Solv-ccCA method is able to predict the pKa values of nitrogen systems to within 0.7 pKa unit (less than 1.0 kcal mol-1), overall. A hydrogen bonding constant has also been developed for use with weakly interacting dimers and small cluster compounds, resulting in ccCA interaction energies for water clusters and dimers of the S66 set to within 1.0 kcal mol-1 of well-established theoretical values.
Computational Studies of C–H/C–C Manipulation Utilizing Transition Metal Complexes
Density Functional Theory (DFT) is an effective tool for studying diverse metal systems. Presented herein are studies of a variety of metal systems, which can be applied to accomplish transformations that are currently difficult/impossible to achieve. The specific topics studied utilizing DFT include: 1) C–H bond activation via an Earth-abundant transition metal complex, 2) C–H bond deprotonation via an alkali metal superbase, 3) and amination/aziridination reactions utilizing a CuI reagent. Using DFT, the transformation to methanol (CH3OH) from methane (CH4) was examined. The transition metal systems studied for this transformation included a model FeII complex. This first-row transition metal is an economical, Earth-abundant metal. The ligand set for this transformation includes a carbonyl ligand in one set of complexes as well as a phosphite ligand in another. The 3d Fe metal shows the ability to convert alkyls/aryls to their oxidized counterpart in an energetically favorable manner. Also, “superbasic” alkali metal amides were investigated to perform C—H bond cleavage. Toluene was the substrate of interest with Cs chosen to be the metal of interest because of the highly electropositive nature of this alkali metal. These highly electrophilic Cs metal systems allow for very favorable C—H bond scission with a toluene substrate. Finally, the amination and aziridination of C–H and C=C bonds, respectively, by a CuI reagent was studied. The mechanism was investigated using DFT calculations. Presently, these mechanisms involving the use of coinage metals are debated. Our DFT simulations shed some insight into how these transformations occur and ultimately how they can be manipulated.
Applications of Single Reference Methods to Multi-Reference Problems
Density functional theory is an efficient and useful method of solving single-reference computational chemistry problems, however it struggles with multi-reference systems. Modifications have been developed in order to improve the capabilities of density functional theory. In this work, density functional theory has been successfully applied to solve multi-reference systems with large amounts of non-dynamical correlation by use of modifications. It has also been successfully applied for geometry optimizations for lanthanide trifluorides.
The Mechanisms of Human Glutathione Synthetase and Related Non-Enyzmatic Catalysis
Human glutathione synthetase (hGS) is a homodimeric enzymes that catalyzes the second step in the biological synthesis of glutathione, a critical cellular antioxidant. The enzyme exhibits negative cooperativity towards the γ-glutamylcysteine (γ-GC) substrate. In this type of allosteric regulation, the binding of γ-GC at one active site significantly reduces substrate affinity at a second active site over 40 Å away. The presented work explores protein-protein interactions, substrate binding, and allosteric communication through investigation of three regions of hGS: the dimer interface, the S-loop, and the E-loop. Strong electrostatic interactions across the dimer interface of hGS maintain the appropriate tertiary and quaternary enzymatic structure needed for activity. The S-loop and E-loop of hGS form walls of the active site near γ-GC, with some residues serving to bind and position the negatively cooperative substrate. These strong interactions in the active site serve as a trigger for allosteric communication, which then passes through hydrophobic interactions at the interface. A comprehensive computational and experimental approach relates hGS structure with activity and regulation. ATP-grasp enzymes, including hGS, utilize ATP in the nucleophilic attack of a carboxylic acid in a reaction thought to proceed through the formation of an acylphosphate intermediate. Small metal cations are known to chelate the terminal phosphates of actives site ATP, yet the role of these atoms remains unclear. In the presented work, a computational metal substitution study establishes the role these divalent cations in the catalysis of peptide bonds. The simple model is used to determine the impact of metal cations on the thermodynamics and kinetics, an important stepping stone in understanding the importance of metal cations in larger biological systems.
Pathways for C—H Activation and Functionalization by Group 9 Metals
As fossil fuel resources become more and more scarce, attention has been turned to alternative sources of fuels and energy. One promising prospect is the conversion of methane (natural gas) to methanol, which requires an initial activation of a C-H bond and subsequent formation of a C-O bond. The most well studied methodologies for both C-H activation and C-O bond formation involve oxidation of the metal center. Metal complexes with facile access to oxidation states separated by four charge units, required for two subsequent oxidations, are rare. Non-oxidative methods to perform C-H bond activation or C-O bond formation must be pursued in order for methane to methanol to become a viable strategy. In this dissertation studies on redox and non-redox methods for both C-H activation and C-O bond formation are discussed. In the early chapters C-O bond formation in the form of reductive functionalization is modeled. Polypyridine ligated rhodium complexes were studied computationally to determine the properties that would promote reductive functionalization. These principles were then tested by designing an experimental complex that could form C-O bonds. This complex was then shown to also work in acidic media, a critical aspect for product stabilization. In the later chapters, non-oxidative C-H activation is discussed with Ir complexes. Both sigma bond metathesis and concerted metalation deprotonation were investigated. For the former, the mechanism for an experimentally known complex was elucidated and for the latter the controlling factors for a proposed catalyst were explored.
Transition Metal Catalyzed Oxidative Cleavage of C-O Bond
The focus of this thesis is on C-O bonds activation by transition metal atoms. Lignin is a potential alternative energy resource, but currently is an underused biomass species because of its highly branched structure. To aid in better understanding this species, the oxidative cleavage of the Cβ-O bond in an archetypal arylglycerol β-aryl ether (β–O–4 Linkage) model compound of lignin with late 3d, 4d, and 5d metals was investigated. Methoxyethane was utilized as a model molecule to study the activation of the C-O bond. Binding enthalpies (ΔHb), enthalpy formations (ΔH) and activation enthalpies (ΔH‡) have been studied at 298K to learn the energetic properties in the C-O bond cleavage in methoxyethane. Density functional theory (DFT) has become a common choice for the transition metal containing systems. It is important to select suitable functionals for the target reactions, especially for systems with degeneracies that lead to static correlation effects. A set of 26 density functionals including eight GGA, six meta-GGA, six hybrid-GGA, and six hybrid-meta-GGA were applied in order to investigate the performance of different types of density functionals for transition metal catalyzed C-O bond cleavage. A CR-CCSD(T)/aug-cc-pVTZ was used to calibrate the performance of different density functionals.
Synthesis of Peropyrene and Tetracene Derivatives for Photochemical Applications
A novel route for the synthesis of the polycyclic aromatic hydrocarbon peropyrene (Pp) is reported along with the efforts to synthesize derivatives of Pp, 2,2′- and 5,5′-linked tetracene dimers as candidates for study as singlet fission materials in photovoltaic devices. Peropyrene was synthesized by the McMurry coupling conditions from phenalenone and low-valent titanium species. The crystal structure of Pp is formed by π-stacked molecular pairs in a herringbone arrangement. The direct functionalization of Pp was studied, and several indirect methods for the functionalization of Pp via phenalenone derivatives are reported. Nucleophilicly dependent, regioselective Michael addition pathways for phenalenone are described. Phenalenone forms a nucleophilic complex with bispinacolatodiboron and yields chiral 3,3′-linked phenalenone dimers and a bicyclo[3.2.1]octane derivative product of an unusual 3,4 addition. An active complex product of phenalenone and (dimethylphenylsilyl)boronic acid pinacolic ester forms Pp directly. The synthesis of 2,2′- and 5,5′-linked tetracene dimers led to the study of the reduction of 1-arylprop-2-yn-1-ol derivatives via TFA-catalyzed hydride transfer from triethylsilane. Substrates with terminal and TMS-protected alkynes showed silane exchange upon reduction. A TMS-protected, terminal alkyne became triethylsilyl-protected by about 50% whereas only triethylsilyl-protected, terminal alkyne was observed from the reduction of an unprotected, terminal alkyne. A new conformational polymorph of 1,4-bis(triisopropylsilyl)buta-1,3-diyne is reported. Five other rotamers are studied by density functional theory as possible candidates of conformational polymorphism by the analysis of torsional strain energies. The relative stabilities and interconversion equilibria of the seven conformational isomers are studied.
First-Semester General Chemistry Curriculum Comparison of Student Success on ACS Examination Questions Grouped by Topic Following an Atoms First or Traditional Instructional Approach
This study uses the ACS first-term general chemistry exam to determine if one curriculum approach is more effective in increasing student success than the other based on their performance on the ACS exam. Two chemistry curriculum approaches were evaluated in this study; the traditional curriculum (TC) and the Atoms First (AF) approach. The sample population was first-semester general chemistry students at Collin College in Frisco, TX. An independent sample t-test was used to determine if there were differences in overall performance between the two curriculum approaches on two different versions of the ACS exam. The results from this study show that AF approach may be a better alternative to the TC approach as they performed statistically significantly better on the 2005 exam version. Factor analysis was used to determine if there were differences between the two curriculum approaches by topic on the ACS exam. Eight different topics were chosen based on topics listed on the ACS Examinations Institute Website. The AF students performed better at a statistically significant level than the TC students on the topics of descriptive chemistry and periodicity, molecular structure, and stoichiometry. Item response theory was used to determine the chemistry content misconceptions held by the students taught under both curriculum approaches. It was determined that for both curriculum groups the same misconceptions as determined by the Zcrit values persisted.
Diimine(dithiolate)platinum(ii) Chromophores: Synthesis, Spectroscopy, and Material Applications
A series of 28 square-planar dithiol(diimine)platinum(II) chromophoric complexes have been synthesized, characterized, and evaluated for potential efficacy in sensitization of solid state photovoltaic devices to the near-infrared regions of the electromagnetic spectrum. The effect of molecular stacking in the solid state and self-association in solution are shown to influence spectral, electronic, and magnetic properties of the chromophores. Such properties are investigated in the pure form and as partners in donor-acceptor charge transfer adducts. Finally, selected chromophores have been incorporated into single layer schottky diodes as neat films and as dopants in multi-layer organic photovoltaic devices. Evaluation of the devices internal quantum efficiency and voltage-current was measured as proof of concept.
Kinetic Investigation of Atomic Hydrogen with Sulfur-Containing Species
The reactions of atomic hydrogen with methanethiol and that of atomic hydrogen with carbon disulfide were studied experimentally using flash-photolysis resonance-fluorescence techniques. Rate constants were determined over a range of temperatures and pressures, and through analysis and comparison to theoretical work details of the reactions were ascertained.
Synthesis of Novel Organic Chromophores and Their Characterization
Nonlinear organic liquids that exhibit two-photon absorption (TPA) function as good optical limiters for sensor protection from laser pulses. L34 (4-butyl-4'-propyl-diphenylethyne) is a liquid organic compound exhibiting nonlinear optical absorption. A thiol- derivatized analog of L34 (“thiol-L34”) was prepared to bind the molecules to the surface of gold nanoparticles. Surface binding is necessary to investigate synergy between nonlinear optical absorption of gold nanoparticles and thiol-L34. Thiol-L34 was prepared in a six-step organic synthesis starting from 3-(4-bromophenyl) propionic acid. Au nanoparticles with <15 nm diameter have been prepared and sensitized with the thiol-L34 compound for assessment of their nonlinear optical behavior. Diazolylmethenes a class of metal-coordinating dyes that are similar to dipyrrins with some substitutions of nitrogen atoms in place of carbon atoms. Modification in the framework of dipyrrinoid dyes via this replacement of nitrogen for carbon atoms may lead to compounds that serve as effective agents for bioimaging and/or photodynamic therapy. Several routes to the synthesis of di-(1,2,3)-triazolylmethenes, di-(1,2,4)-triazolylmethenes, and ditetrazolylmethenes are presented.
Kinetic Studies on C‐h Bond Activation in the Reaction of Triosmium Clusters with Diphosphine and Amidine Ligands
The reaction of 1-(diphenylphosphino)-2-(diphenylphosphito)benzene (PP*) and Os3(CO)10(ACN) has been investigated. A combined experimental and computational study on the isomerization of 1,2-Os3(CO)10[μ-1,2-Ph2P(C6H4)P(OPh)2] (A) and 1,1-Os3(CO)10[μ-1,2-Ph2P(C6H4)P(OPh)2] (B) and reversible ortho-metalation exhibited by the triosmium cluster B are reported. The subsequent conversion of cluster B to the hydrido cluster HOs3(CO)9[μ-1,2-PhP(C6H4-η1)C6H4P(OPh)2] (E) and the benzyne-substituted cluster HOs3(CO)8(µ3-C6H4)[μ-1,2-PhP(C6H4)P(OPh)2] (N) has been established. All of these new clusters have been isolated and fully characterized in solution by IR and NMR spectroscopy; in addition, X-ray diffraction analyses have been performed on the clusters A, B, J, and N. The ortho-metalation reaction that gives cluster E is shown to be reversible, and the mechanism has been probed using selectively deuterated PP* isotopomers. Kinetic and thermodynamic isotope data, in conjunction with DFT calculations, are presented that support the existence of an intermediate unsaturated cluster in the ortho-metalation reaction. Due to interest in the coordination chemistry of formamidines, the non-symmetric amidine ligands PhNC(Me)NHPri, PhNC(Et)NHPri, and (2,4,6-Me3C6H2)NC(Me)NHPri, have been synthesized, and their reaction with Os3(CO)10(MeCN)2 has been investigated. Of the twelve new clusters prepared in section, seven have been structurally characterized by X-ray crystallography.
Synthesis of Tethering Group on Borylazadipyrromethene Dyes to Apply to Photogalvanic Dye-sensitized Solar Cells
This is my thesis research on the preparation of borylazadipyrromethene (azaBODIPY) dyes bearing an anchoring group, such as a carboxylic acid group, at the β-pyrrolic position of the azadipyrromethene scaffold. Carboxylate groups form covalent bonds to oxide semiconductors such as TiO2 (n-type) or Cu2O (p-type) in dye-sensitized solar cells (DSCs) or photogalvanic dye-sensitized solar cells (P-DSCs). Oxide-binding azaBODIPY dyes can be used to investigate the rate and mechanism of electron injection from the dyes to the semiconductors. Two different types of azaBODIPY (difluoroboryl and dialkynylboryl) were prepared by following previously developed methods. To convert difluoroborylazaBODIPY to the final dyes having a carboxylic acid in the β-pyrrolic position, several distinct synthetic routes were designed, adopting various reactions, such as halogenation, Sonogashira coupling, Knoevenagel condensation, Grignard reagents, Vilsmeir-Haack, and Steglich esterification. Some of these reactions were successful, but the overall synthesis to the targeted final molecule couldn’t be accomplished. Even though further studies on the synthesis of oxide-binding azaBODIPYs are needed, at least my thesis research suggests what reactions can be implemented to complete this synthesis in the future. Proton NMR (nuclear magnetic resonance) and carbon NMR were commonly used to confirm the synthesized compounds, and sometimes crystallographic information was obtained by XRD (X-ray diffraction) whenever crystals of sufficient size and quality were grown. NMR spectra, interpreted by SpinWorks 3 software, and crystal structures will be introduced in each chapter.
The Effect of Plasma on Silicon Nitride, Oxynitride and Other Metals for Enhanced Epoxy Adhesion for Packaging Applications
The effects of direct plasma chemistries on carbon removal from silicon nitride (SiNx) and oxynitride (SiOxNy ) surfaces and Cu have been studied by x-photoelectron spectroscopy (XPS) and ex-situ contact angle measurements. The data indicate that O2,NH3 and He capacitively coupled plasmas are effective at removing adventitious carbon from silicon nitride (SiNx) and Silicon oxynitride (SiOxNy ) surfaces. O2plasma and He plasma treatment results in the formation of silica overlayer. In contrast, the exposure to NH3 plasma results in negligible additional oxidation of the SiNx and SiOxNy surface. Ex-situ contact angle measurements show that SiNx and SiOxNy surfaces when exposed to oxygen plasma are initially more hydrophilic than surfaces exposed to NH3 plasma and He plasma, indicating that the O2 plasma-induced SiO2 overlayer is highly reactive towards ambient corresponding to increased roughness measured by AFM. At longer ambient exposures (>~10 hours), however surfaces treated by either O2, He or NH3 plasma exhibit similar steady state contact angles, correlated with rapid uptake of adventitious carbon, as determined by XPS. Surface passivation by exposure to molecular hydrogen prior to ambient exposure significantly retards the increase in the contact angle upon the exposure to ambient. The results suggest a practical route to enhancing the time available for effective bonding to surfaces in microelectronics packaging applications.
Characterization of Ionic Liquid Solvents Using a Temperature Independent, Ion-Specific Abraham Parameter Model
Experimental data for the logarithm of the gas-to-ionic liquid partition coefficient (log K) have been compiled from the published literature for over 40 ionic liquids over a wide temperature range. Temperature independent correlations based on the Gibbs free energy equation utilizing known Abraham solvation model parameters have been derived for the prediction of log K for 12 ionic liquids to within a standard deviation of 0.114 log units over a temperature range of over 60 K. Temperature independent log K correlations have also been derived from correlations of molar enthalpies of solvation and molar entropies of solvation, each within standard deviations of 4.044 kJ mol-1 and 5.338 J mol-1 K-1, respectively. In addition, molar enthalpies of solvation and molar entropies of solvation can be predicted from the Abraham coefficients in the temperature independent log K correlations to within similar standard deviations. Temperature independent, ion specific coefficients have been determined for 26 cations and 15 anions for the prediction of log K over a temperature range of at least 60 K to within a standard deviation of 0.159 log units.
Acceptor-sensitizers for Nanostructured Oxide Semiconductor in Excitonic Solar Cells
Organic dyes are examined in photoelectrochemical systems wherein they engage in thermal (rather than photoexcited) electron donation into metal oxide semiconductors. These studies are intended to elucidate fundamental parameters of electron transfer in photoelectrochemical cells. Development of novel methods for the structure/property tuning of electroactive dyes and the preparation of nanostructured semiconductors have also been discovered in the course of the presented work. Acceptor sensitized polymer oxide solar cell devices were assembled and the impact of the acceptor dyes were studied. The optoelectronic tuning of boron-chelated azadipyrromethene dyes has been explored by the substitution of carbon substituents in place of fluoride atoms at boron. Stability of singlet exited state and level of reduction potential of these series of aza-BODIPY coumpounds were studied in order to employ them as electron-accepting sensitizers in solid state dye sensitized solar cells.
Electrodeposition of Nickel and Nickel Alloy Coatings with Layered Silicates for Enhanced Corrosion Resistance and Mechanical Properties
The new nickel/layered silicate nanocomposites were electrodeposited from different pHs to study the influence on the metal ions/layered silicate plating solution and on the properties of the deposited films. Nickel/layered silicate nanocomposites were fabricated from citrate bath atacidic pHs (1.6−3.0), from Watts’ type solution (pH ~4-5), and from citrate bath at basic pH (~9). Additionally, the new nickel/molybdenum/layered silicate nanocomposites were electrodeposited from citrate bath at pH 9.5. The silicate, montmorillonite (MMT), was exfoliated by stirring in aqueous solution over 24 hours. The plating solutions were analyzed for zeta potential, particle size, viscosity, and conductivity to investigate the effects of the composition at various pHs. The preferred crystalline orientation and the crystalline size of nickel, nickel/layered silicate, nickel/molybdenum, and nickel/molybdenum/layered silicate films were examined by X-ray diffraction. The microstructure of the coatings and the surface roughness was investigated by scanning electron microscopy and atomic force microscopy. Nickel/molybdenum/layered silicate nanocomposites containing low content of layered silicate (1.0 g/L) had increase 32 % hardness and 22 % Young’s modulus values over the pure nickel/molybdenum alloy films. The potentiodynamic polarization and electrochemical impedance measurements showed that the nickel/molybdenum/layered silicate nanocomposite layers have higher corrosion resistance in 3.5% NaCl compared to the pure alloy films. The corrosion current density of the nickel/molybdenum/layered silicate nanocomposite composed of 0.5 g/L MMT is 0.63 µA·cm-2 as compare to a nickel/molybdenum alloy which is 2.00 µA·cm-2.
Quantitative Chemical Analysis of the Soils of Erath County, Texas
A chemical analysis of representative samples of Windthorst sand, Denton sand, and Denton clay has been made, and this analysis shows that their composition has a strict correlation with respect to their geological origins. The analyses of the different soils have shown the Windthorst sand to be highly deficient in all of the essential elements, whereas the Denton sand is deficient in only one; namely, phosphorus. The analysis of the Denton clay showed it to be highly fertile. From the consideration of the pH and the lime content, it has been determined to some extent what crops will grow in each of the soils.
A Study of the Quantitative Determination of Nitrogen
The purpose of this paper is to investigate the Kjeldahl method of nitrogen determination.
Organomagnesium Compounds in Benzene Solvent and Their Application in Synthesis of Organoberyllium Compounds
The work reported by D. Bryce-Smith and G. F. Cox, along with several recent publications describing experimental results designed to elucidate the long disputed question of the structure of the Grignard reagent in ether stimulated the work reported here, in an effort to obtain additional evidence of the structure of the organomagnesium complex in benzene solvent. Since the primary objective of this work was to prepare organoberyllium compounds using the organomagnesium complexes in hydrocarbon solvents, it seemed an insight into the structure of these complexes would be beneficial in this work. The techniques used and experimental evidence obtained from the structure elucidation of the ethereal Grignard reagent have been most helpful in organization of the methods used to study the structure of organomagnesium halide complexes in benzene solvent. It seemed that an insight into the structure of these organomagnesium halide complexes in hydrocarbon solvents would be beneficial in accomplishing the second objective of this work. This objective was to prepare organoberyllium compounds using the organomagnesium halide complexes prepared in hydrocarbon solvents.
Copper (II) Complexes with Deprotonated N-(2-hydroxyethyl)ethylenediamine
This thesis reports the synthesis and characterization of two new copper(II) halide complexes with deprotonated N-(2-hydroxyethyl)ethylenediamine behaving as a bidentate. The magnetic properties of the new copper(II) complexes were studied from room temperature to liquid nitrogen temperatures. The magnetic data show that both complexes exhibit antiferromagnetic interactions with a singlet ground state and a thermally accessible triplet excited state. Magnetic data and infrared spectra indicate the complexes are halogenbridged. Deprotonation at an amine nitrogen is based on the presence of a hydroxyl stretching band in the infrared spectra. Electronic spectra and infrared spectra indicate the complexes are square planar. Elemental analyses, infrared spectra, electronic spectra, electron spin resonance spectra, and magnetic data are reported and discussed.
Magnetic Properties of Copper (II) Complexes of Schiff Bases
The synthesis and characterization of two new Schiff base copper(II) complexes are reported. These are Cu(acac: 2-amino-l-phenylethanol) and Cu(acac:2-amino-l-butanol). The ligands, derived from acetylacetone and the appropriate aminoalcohol, are dibasic tridentates with 0,N,O donor atoms. The magnetic properties of the complexes were studied at several temperatures between 78 OK and 296 OK. The magnetic moment of Cu(acac:2-amino-l-phenylethanol) varied little with temperature, and that of Cu(acac:2-amino-lbutanol) increased as the temperature was lowered. This is in contrast to the magnetic moment of Cu(acac:ethanolamine), which decreases as the temperature decreases. Molecular weight data, infrared spectra, magnetic data, electronic spectra, and electron spin resonance spectra of both complexes are reported and discussed.
Magnetic Properties of Copper (II) Complexes of N-(Hydroxyalkyl) Pyrrole-2-Aldimines
In this work magnetic properties of copper(II) complexes on N-(hydroxyalkyl) pyrrole-2-aldimines were investigated by various techniques, one of which was magnetic susceptibility. Magnetic moments are not directly determined experimentally, but magnetic susceptibilities are.
The Vacuum Ultraviolet Spectra of Cyclohexane, Cyclohexene, 1,4-Cyclohexadiene, Isotetralin, and Several Methyl Substituted Analogs
A paucity of literature exists on the Independent System analysis of adjacent, parallel transition dipoles. Applying this theory and certain spectral information semiemperical calculations were made to predict absorption profiles and band intensities. To aid in the assignment of the 7*+7 absorption bands it was necessary to obtain the vacuum ultraviolet spectra of cyclohexane and cyclohexene. Because the spectra of these molecules contained sharp, atomic-like absorption bands a Rydberg series could be fitted to certain absorptions, thus the determination of their ionization potentials. Using Independent System analysis profiles and intensities of 7*+q-- absorption bands ins 'several methyl substituted 1,4- cyclohexadienes and isotetralin were predicted where general agreement was found with observed experimental spectra.
Mass Spectral Study of Trimethylsilylmethyl Substituted Chlorosilanes
The mass spectra of the compounds [Me 3 SiCH2 nSiCl 4 n (n=1-3) were studied in detail. MIKES and CID spectra were used in conjunction with the observance of metastable processes to develop consistent fragmentation schemes. Particular attention is drawn to the formation of charged and neutral species containing the silicon-carbon double bond, including 2-silaallene, under conditions of electron impact.
Chemical Cleavage of Human Phosphoglucose Isomerase at Cysteine
The present study has resulted in the development of a procedure for the specific chemical fragmentation of human phosphoglucose isomerase into a minimal number of peptides. A two-cycle procedure for cleaving the protein with 2-nitro-5- thiocyanobenzoic acid results in four primary peptides and three overlap peptides. The peptides can be readily separated on the basis of their size by using sodium dodecyl sulfate polyacrylamide gel electrophoresis. Preliminary peptide alignments have been considered, and amino acid analyses have been performed. End-terminal analyses of the enzyme revealed a carboxyl terminal sequence of Asp-Val-Gln and a blocked amino terminus. The cysteine cleavage procedure provides an excellent method for the identification and location of specific genetic mutations of human phosphoglucose isomerase.
Synthesis and Study of Glutaryl-S-(ω-aminoalkyl)-L-cysteinylglycines as Inhibitors of Glyoxalase I
This thesis describes the synthesis and preliminary enzymatic study of glutaryl-S-(8-aminooctyl)-L-cysteinylglycine and glutaryl-S-(10-aminodecyl)-L-cysteinylglycine as inhibitors of glyoxalase I. These analogs of glutathione were prepared as potential ligands for affinity chromatography purification of glyoxalase I. The compounds were synthesized by a seven-step procedure in overall yields of 24% for the octyl analog and 33% for the decyl analog. Both compounds exhibited mixed type inhibition of the enzyme, with the decyl derivative being more inhibitory than the octyl derivative. The inhibition was nonlinear (parabolic) for both compounds. Although less inhibitory than the corresponding S-substituted glutathione derivatives, these analogs are promising candidates for affinity chromatography ligands. Such compounds may also be useful in studying the mechanism of glyoxalase I.
Brainstem Lipids' Relationship to Death
Previous work relating postmortem findings with cause of death have focused on the vitreous portion of the body. This research investigated the link between phospholipids in the brainstem and cause of death. The lipids were extracted by the Folch extraction method and then separated by High Performance Thin Layer Chromatography. These techniques gave excellent separation and resolution. Results showed no link between cause of death and the type of lipids found in the brainstem after death.
Inhibitors of Dihydrofolate Reductase, 8-Oxapteridines
The biological activities of some homeosterically related analogs of dihydrofolic acid have been examined involving pyrimido[4,5-b][l,4]oxazine (8-oxapteridine) derivatives. It is anticipated that these compounds might interfere with the essential intermediary metabolic functions of the vitamin and thus serve as potential chemotherapeutic agents. Preliminary toxicity studies in microbial assay systems were disappointing; however, inhibitory effects were demonstrated in cell free enzyme systems. A comparison of the structure/activity relationships was determined using two folic acid coenzyme systems, dihydrofolate reductase and thymidylate synthetase. The 2-amino-4-hydroxy-6-(substituted)-8-oxapteridines were generally more effective inhibitors than the corresponding 2,4-diamino analogs. The relative biological activity of a series of 2-amino-4-hydroxy-6-ω-phenylalkyl derivatives were examined, and the most active derivative was the 6-phenylethyl analog which appears to function as a mixed-type inhibitor involving partially competitive and partially non-competitive inhibition.
The Crystal and Molecular Structure of 2, 2' bipyridylglycinatochloro Copper (II) Dihydrate
The three-dimensional x-ray structure of 2,2'-bipyridylglycinatochloro copper(II) dihydrate has been fully refined to a final R factor of 0.081. The bipyridyl and glycine ligands are arranged about the central copper atom in a square planar configuration while the chlorine atom is 2.635 angstroms above this plane directly over the copper atom. This unusually long distance is explained by the positioning of a glycine group on the opposite side of the square plane, resulting in a distorted octahedral arrangement. Also, the chlorine atom is linked to three oxygen atoms via hydrogen bonding, thus stabilizing the distorted octahedral complex.
Isozymes and In Vivo Activity of Triosephosphate Isomerase
The distribution of isozymes of triosephosphate isomerase was normal in all human tissues examined. This finding argues against the existence of tissue-specific isozymes. Normal distributions of isozymes were also found in patients with cri-du-chat syndrome. Thus it is unlikely that a gene for triosephosphate isomerase is located on the short arm of chromosome five in man. When triosephosphate isomerases from a wide range of species were examined by starch gel electrophoresis, definite evolutionary patterns were found. Kinetic studies were conducted on human triosephosphate isomerase under conditions simulating the intracellular environment of the erythrocyte. Calculations using the kinetic parameters obtained indicate that even in triosephosphate isomerase deficiency disease, enough enzyme activity remains that the rate of glycolysis should not become inhibited.
Hydraulic Activity in Synthetic and Commercial Slags
Slag, by itself, shows very little hydraulic activity. However, hydration is greatly accelerated by incorporation of the slag with Portland cement. This phenomenon is due to the activating role of calcium hydroxide released from the hydration of Portland cement. This study was aimed at finding other activators that will increase hydration in both synthetic and commercial slags. The effects of chemical composition and the aggregation state of the slag on the hydration process were also investigated. For the synthetic slags, the aggregation state was altered by different quenching techniques. The chemical composition was varied by synthesizing a series of slags. The degree of hydration was studied by developing a thermogravimetric analysis technique and the glass content was determined using microscopy. Minerals were determined using powder x-ray diffraction analysis.
Studies Concerning Asparagine Metabolism in Lactobacillus plantarum
This study is concerned with the metabolism of L-asparagine in Lactobacillus plantarum (ATCC 8014). Theprimary area of investigation is the preliminary characterization of a previously unreported L-asparaginase enzyme in L. plantarum. This L-asparaginase was determined to be an inducible enzyme with variations in its activity level according to the L-asparagine level in the growth medium. L-Glutaminase could not be induced in this organism by L-glutamine, nor would L-glutamine induce the asparaginase activity. These and other studies with amino acid analogs demonstrated the high specificity of both induction and enzymic activity of the asparaginase. Various physical properties of the enzyme were studied. The enzyme was found to be inhibited by adenosine triphosphate (ATP). This inhibition appears to be cooperative in nature and of the type exhibited by allosteric enzymes. These studies should be confirmed on a highly purified enzyme as these preliminary experiments were performed using a crude cell-free extract.
Magnetic Properties of Metal(II) Schiff Base Complexes
Ligands prepared from various combinations of aldehydes and ketones with the appropriate aminealcohol were complexed with cupric acetate monohydrate. The complexes with O,NO or N,N,O donor atoms were synthesized to study the influences of the ligand on molecular structure, spin-spin interaction, and on the value of the exchange integral. The magnetic data indicated that of the eight Cu(II) complexes discussed, two behaved differently from known analogous compounds. Cu (benzoylacetone :ethanolamine) was compared to Cu(acac:ethanolamine), and Cu(pyrr:oaminophenol) was compared to Cu(acac:o-aminophenol). Each pair of complexes was postulated to have the same molecular structure. The synthesis and characterization of Mn(pyrr:oaminophenol) 2H2 is also discussed. The following physical data were collected and discussed: elemental analysis, melting point, molecular weight, infrared spectra, electronic spectra, and magnetic susceptibility.
Electrodeless Discharge of Isopropyl Alcohol
Gases at satisfactory pressures fluoresce in the presence of radio frequency radiation (6). Such fluorescent gases have been used to probe fields of radio frequency oscillation and their emission spectra have been recorded and studied. Ions with multiple charges also exist in these gases, (6). In 1941 Oliver (12) observed the fluorescence of an isobutane- isobutene gaseous mix flowing to a pump through a glass tube which was wrapped by a spiral antenna of a sevenmegacycle transmitter. A white deposit was noticed at a bend in the tubing on the pump side of the fluorescing section of the gas (12, p. 8). In 1957 Blacknall (3) studied the fluorescence and reaction products of propylene in the antenna region of sevenmega- cycle radiation, The oscillator employed by Blacknall was an ARC-5/T-22 military surplus transmitter of range 7.00 to 9.10 megacycles, which he operated at 7.00 megacycles. Blacknall observed a drop in pressure and the formation of a brown deposit in the region of the coil. Blacknall did not report an analysis of this product. In 1959 Armstrong (1) repeated Blacknall's experiments and modified Blacknall's apparatus into an improved design. He also performed an analysis on Blacknall's product. Blacknall used a vertical open-end mercurial manometer with which to measure pressure in his system and as a result introduced mercury vapor into his system. Armstrong tried to minimize the amount of mercury introduced by covering his manometric mercury with a layer of octyl sebacate, "octoil". Armstrong used a spiral-would antenna wrapped around his reaction vessel and reported the formation of spiral brown rings coincident with the copper wire of the antenna. There was a white product deposited in a spiral interlaced with the spiral of dark brown material. No definite identification was reported by Armstrong other than reporting, his solid material as isotactic …
Studies of L-Asparaginase from Lactobacillus Plantarum
This study is concerned with the regulation of Lasparaginase (LA) in the cell-free crude extracts from Lactobacillus plantarum (ATCC8014). A previously reported finding that adenosine triphosphate (ATP) inhibits the action of LA in crude extracts was confirmed. The study was extended to include the mono-, di-, and triphosphates of adenosine, guanosine, cytidine, and uridine. These compounds were also shown to inhibit LA activity. These andother studies revealed that LA appears to be an allosteric type enzyme exhibiting positive homotropism with respect to substrate and heterotropism with respect to the nucleotides tested. The regulation of LA activity by high energy compounds, when coupled with asparagine synthetaseL suggests a relationship between amide synthesis-amide degradation and the energy levels of the cell.
The Correlation Between Carbon-Proton and Proton-Proton Coupling Constants
The correlation between the carbon-proton and proton-proton coupling constants have been studied in various 13 systems. Isocrotonic acid-carboxyl-3C, crotonic acid- 13 13 carboxyl-3C, and 5-norbornene-2-carboxylic acid-carboxyl-3C- 1,5,6,7,7-hexachloro were synthesized and their carbonproton coupling constants were analyzed. Nmr studies showed the magnitudes of the carbon-proton coupling constants to correlate well with analogous protonproton coupling constants, although the values of the couplings were larger than expected. The geminal olefinic couplings were considerably larger than all other couplings, but they were self-consistent. The signs of the carbon-proton coupling constants also were in agreement without exception with the signs of analogous proton-proton coupling constants.
Denaturation, Renaturation and Other Structural Studies on Phosphoglucose Isomerases
Structural properties of phosphoglucose isomerases isolated from a variety of species have been compared by peptide fingerprinting, predicted amino acid sequence homologies and by denaturation and renaturation studies. The enzymes are more readily denatured in guanidinium chloride than in urea, and the isomerase isolated from yeast is more stable toward acid pH than the rabbit muscle enzyme. The rates of guanidinium chloride-induced denaturation are markedly increased by ionic strength and decreased by substrates, competitive inhibitors or glycerol. The enzyme can be renatured, but only in the presence of glycerol. The renaturation process is dependent on protein concentration and temperature and provides a method for the formation of mixed species heterodimers.
Isolation and Characterization of Proteus vulgaris Methylglyoxal Synthetase
Methylglyoxal synthetase, which catalyzes the formation of methylglyoxal and inorganic phosphate from dihydroxyacetone phosphate, was found in extracts of Proteus vulgaris. An efficient purification procedure utilizing ion exchange column chromatography and isoelectric focusing has been developed. Homogeneity of the enzyme preparation was confirmed by polyacrylamide gel electrophoresis and rechromatography.Two components of methylglyoxal synthetase were obtained upon isoelectric focusing. A comparison of the chemical and physical properties of the two components was carried out. The enzyme is a dimer. In the presence of inorganic phosphate, the hyperbolic saturation kinetics with dihydroxyacetone phosphate are shifted to sigmoidal.
Investigation of Substituent Effects of 2-Substituted Silaethylenes
This investigation is concerned with determining whether a carbon substituent or a silicon substituent on the carbon terminus of a silicon-carbon double bond has a more stabilizing effect. Two different 2-substituted silaethylenes were generated at the same time by pyrolyzing 1, 1-dimethyl-2-neopentyl-4- (dimethylalkoxysilyl) silacyclobutanes in a nitrogen flow system. The results of these pyrolyses, both neat and in the presence of a trapping reagent, show that the silaethylene with a silicon substituent on the carbon terminus was favored approximately two to one over the silaethylene with a carbon substituent. This datum, along with other observations and hypotheses discussed, leads to the suggestion that the silicon substituenton the carbon terminus of the silaethylene bond has a more stabilizing effect than the carbon substituent.
Determination of Halogens in Organic Compounds by Using Sodium Fusion-Ion Chromatography Method
A sodium fusion-Ion chromatographic method for determination of fluorine, chlorine, bromine, and iodine in organic compounds is described. Seventeen organic halogen compounds and eleven mixtures were decomposed by Na fumes at 280-290°C for one hour or longer. The absorbing solutions were injected for ion chromatographic analysis using electrochemical and conductometric detectors. The arrangement of the apparatus includes the placement of the electrochemical and conductometric detectors. This method provides a mechanism providing for complete analysis for all four halogens in one ion chromatographic sample injection. Reproducibility is excellent and liquid sample handling is mentioned.
The Regulation of HMG-CoA Reductase by Enzyme-Lipid Interactions
The temperature-dependent catalytic activity of rat liver 3-hydroxy-3 -methylglutaryl coenzyme A reductase (HMG-CoA reductase) displays the nonlinear Arrhenius behavior characteristic of many membrane-bound enzymes. A two-conformer equilibrium model has been developed to characterize this behavior. In the model, HMG-CoA reductase undergoes a conformational change from a low specific activity to a high specific activity form. This conformation change is apparently driven by a temperature-dependent phase transition of the membrane lipids. It has been found that this model accurately describes the data from diets including rat chow, low-fat, high-carbohydrate, and diets supplemented with fat, cholesterol or cholestyramine. The effects characterized by the model are consistent with the regulation of HMG-CoA reductase by enzyme-lipid interactions.
Synthesis and 2-D NMR Analysis of a New Phenyl-Substituted Polycyclic Compound
Diels-Alder [4+2] cycloaddition of a mixture of 1- and 2 methylcyclopentadiene to 2-phenyl-g.-benzoquinone affords a mixture of four nd cycloadducts. A single, isomerically pure cycloadduct was isolated by careful column chromatography. Stereospecific reduction of this material with sodium borohydride and cerium(III) chloride 'affords a single, isomerically pure tricyclic diol. The structures of the cycloadduct and this tricyclic diol, established via analysis of their one- and two-dimensionial NMR spectra, were shown to be (1-methyl-5-phenyltricyclo[6.2.1.02,7]undec a-4,9 diene-3,6-dione and 1-methyl-5-phenyltricyclo[6.2.1.0 2 ,7 ]undeca-4,9-diene t.&A-3-=.a-6-diol), respectively. Intramolecular [2+2] photocyclization of this tricyclic diol afforded the corresponding cage diol, 3-methyl-7phenylpentacyclo[5.4.0.0 2 ,6 .03 , 1 0 .05, 9 ]undecane-.exogxa-8,11-diol. Oxidation of this cage diol with pyridinium chlorochromate in dry dichloromethane afforded a single, isomerically pure cage hydroxyketone, 3-methyl-7 phenylpentacyclo[5.4.02,6.03,l .1519]undecane-xA-8-ol-II-one, whose structure was established by single crystal X-ray crystallographic methods.
Raman Studies of Conformational Energies and Hydrogen Bonding in Alcohols
The conformational energy differences have been determined for ethylene glycol, 2- chloroethanol, and 2,2- dichloroethanol in the neat liquid, DMSO, and H20 with Raman spectroscopy. Spectra in the 0-H valence region were utilized to determine the energy difference between interand intramolecularly hydrogen bonded species. It was found that the solvent effect on the relative stabilities of the gauche and trans rotamers of the alcohols differ significantly. The results also indicate that, unlike ethylene glycol, there is significant intramolecular hydrogen bond formation in the halogenated alcohols in the neat liquid phase. Stronger intramolecular hydrogen bond formation was observed in dichloroethanol than in 2-chloroethanol.
Studies on the Biological Activity of N-nitrosamines
Two aspects of the biological activity of N-nitrosamines were studied. First, the effect of ascorbate on the mutagenicity of N-nitrosopiperidines was studied in the Ames Salmanella/ mammalian microsome mutagenicity test. The addition of ascorbate significantly enhanced the mutagenicity of these compounds. This enhancement was selective for N-nitrosamines suggesting a possible role of ascorbate in N-nitrosamine induced carcinogenicity. Second, the technique of velocity sedimentation in alkaline sucrose density gradients was applied to the detection of N-nitrosamine induced DNA damage in Balb/c 3T3 cells. This technique detected N-nitrosamine induced DNA damage when the cells were made permeable before treatment. This technique compares favorably with other test systems used to evaluate N-nitrosamines and should be useful in further studies of N-nitrosamines.
Regulation of Pyridine Nucleotide Metabolism in Saccharomyces cerevisiae
The levels of total nicotinamide adenine dinucleotide (NAD) and nicotinamide adenine dinucleotide phosphate (NADP), and their redox states were determined as the function of growth in S. cerevisiae. Cells growing in a medium containing 0.8% glucose exhibit two phases of exponential growth, utilizing glucose and ethanol, respectively. The NAD pool is 50% reduced during both stages of growth while the NADP pool is 67% reduced in glucose growth and 48% reduced in ethanol growth. The NAD/NADP ratio is constant during growth on glucose and a two-fold increase in the NAD/NADP ratio occurs upon exhaustion of glucose. The increased ratio is maintained during growth on ethanol. This alteration in the regulation of the relative levels of NAD and NADP may be due to a change in the regulation of NAD kinase and/or NADP phosphatase activities. These changes may be related to the redox state of the NADP pool.
Back to Top of Screen