UNT Libraries - 222 Matching Results

Search Results

prev Results: 11 - 34 next
open access

Laser Powder Bed Fusion of H13 Tool Steel: Experiments, Process Optimization and Microstructural Characterization

Description: This work focused on laser powder bed fusion (LPBF) of H13 tool steel to examine microstructure and melt pool morphology. Experiments were conducted with varying laser power (P) in the range of 90-180 W and scan speed (v) in the range of 500-1000 mm/s. layer thickness (l) and hatch spacing (h) were kept constant. Volumetric energy density (γ) was calculated using the above process parameters. In order to find a relation between the recorded density and top surface roughness with changing proces… more
Date: May 2023
Creator: Channa Reddy, Sumanth Kumar Reddy
Item Type: Refine your search to only Thesis or Dissertation

Influence of Externally Applied Magnetic Field on the Mechanical Behavior of Paramagnetic Materials

Description: Current ways to alter the microstructure of materials are usually through heat treatments, alloying, and other physical metallurgical methods. Recent efforts in the 21st century are focused on altering the microstructure of a material without physical contact which can be achieved through exposure to a magnetic field (MF). The motivation of this research is to study the quantum effects by subjecting solid-state metals to exposure of MFs. Many of the popular metals currently used in industry are… more
This item is restricted from view until January 1, 2028.
Date: December 2022
Creator: Reeder, Jessica Phoebe
Item Type: Refine your search to only Thesis or Dissertation
open access

Developing Modern Atom Probe Tomography for Nonmetals

Description: Atom probe tomography as a 3D atomic-scale characterization tool has seen considerable development in the past decade, both in systems improvement and theoretical understanding. However, the time and expertise required from the outset of experimentation to analyzed results is highly asymmetric between metals and nonmetals. For complex oxides, this difficulty can be exemplified by GdBa2Cu3O7-x based high-temperature superconducting coated conductors. The objective of this dissertation is to furt… more
Date: December 2022
Creator: Smith, Jesse Daniel
Item Type: Refine your search to only Thesis or Dissertation

Development and Thermo-Mechanical Testing of Low Hysteresis Shape Memory Alloy for Satellite Actuators

Description: Shape memory alloys (SMAs) have gained much attention as a powerful source of actuation due to their improved performance, reduced size, and reduced complexity between components as well as having a high work output density. Their primary mechanism of actuation relies on a non-diffusional cyclic phase transformation from martensite to austenite, where the amount of thermal energy needed per cycle is directly associated with the hysteresis width between the austenite final and martensite final t… more
Date: December 2022
Creator: Montagnoli, Andre Luiz
Item Type: Refine your search to only Thesis or Dissertation

Investigation of the Processing-Induced Transition from Shape Memory to Strain Glass of Ni-Ti and Fe-Mn-Al-Cr-Ni Alloys

Description: In this study, we observed the effects of the processing-induced method on two different shape memory alloys (SMAs). First, we compare the transformation behavior of a martensitic NiTi SMA during thermal cycling using wide angle synchrotron radiation X-ray diffraction (WAXS). Based on the thermal cycling results, three observations about processing-induced SGAs as compared to SMAs can be seen: (1) retention of distorted austenite at high and low temperatures, (2) broadening of diffraction peaks… more
Date: December 2022
Creator: Ashmore, Bailey Nicole
Item Type: Refine your search to only Thesis or Dissertation

Investigation of Room Temperature Sputtering and Laser Annealing of Chalcogen Rich TMDs for Opto-Electronics

Description: Chalcogen-rich transition-metal dichalcogenide (TMD) magnetron sputtering targets were custom manufactured via ball milling and sintering in the interest of depositing p-type chalcogen-rich films. Room temperature radio frequency (RF) magnetron sputtering produced ultra-thin amorphous precursor of WSx and MoSx (where x is between 2-3) on several different substrates. The influence of working pressure on the MoS3 content of the amorphous films was explored with X-ray photoelectron spectroscopy (… more
Date: August 2022
Creator: Gellerup, Branden Spencer
Item Type: Refine your search to only Thesis or Dissertation

Scuffing and Wear Prevention in Low Viscosity Hydrocarbon Fuels

Description: To design high pressure fuel system components that resist wear and scuffing failure when operated in low viscosity fuels, a comprehensive study on the tribological performance of various existing coating materials is necessary. This thesis aims to provide the relative performance of a variety of coating materials across different fuel environments by testing them in conditions that model those experienced in fuel pumps. The relative performance of these coatings are then indexed across a varie… more
Date: August 2022
Creator: Dockins, Maddox Wade
Item Type: Refine your search to only Thesis or Dissertation
open access

Processing-Structure Relationships of Reactive Spark Plasma Sintered Diamond Composites

Description: Traditional lightweight armor ceramics such as boron carbide (B4C) and silicon carbide (SiC) are used alone or together in varying amounts to create monolithic protective plates. These materials exhibit relatively small differences in hardness, flexure strength, and fracture toughness. Many of the routes taken during the synthesis of the powder and sintering of the plates using traditional ceramic processing techniques have long processing times, tend to leave asperities within the microstruc… more
Date: August 2022
Creator: Garcia, Christian
Item Type: Refine your search to only Thesis or Dissertation

Time-Dependent Deformation Mechanisms in Metallic Glasses as a Function of Their Structural State

Description: In this study, the time-dependent deformation behavior of several model bulk metallic glasses (BMGs) was studied. The BMGs were obtained in different structural states by thermal relaxation below their glass transition temperature, cryogenic thermal cycling, and chemical rejuvenation by micro-alloying. The creep behavior of Zr52.5Ti5Cu17.9Ni14.6Al10 BMG in different structural states was investigated as a function of peak load and temperature. The creep strain rate sensitivity (SRS) indicated a… more
This item is restricted from view until June 1, 2024.
Date: May 2022
Creator: Ghodki, Nandita
Item Type: Refine your search to only Thesis or Dissertation
open access

Effect of Modifier Cation Substitution on Structure and Properties of Bioactive Glasses from Molecular Dynamics Simulations

Description: Bioactive glass is a type of third generation bioactive material that can bond to both soft and hard tissue with applications ranging from bone defect repair, coatings for metallic implants, to scaffolds for tissue engineering. Design of bioactive glasses for these applications rely on a detailed understanding of the structures of these glasses which are complicated and multicomponent. In this thesis, I have applied molecular dynamics (MD) simulations with interatomic potentials developed in ou… more
Date: May 2022
Creator: Vu, Myra
Item Type: Refine your search to only Thesis or Dissertation
open access

Fabrication of the Novel Asymmetric Polymeric Materials via Bottom-Up Approach

Description: Asymmetric polymeric materials can be formed by either top-down or bottom-up methods. Bottom-up methods involve assembling the atoms and molecules to form small nanostructures by carefully controlled synthesis, which results in a reduction of some of the top-down limitations. In this dissertation, thermal, tribological and antireflective properties of polymeric materials have been enhanced by introducing structural asymmetry. The overall performance of commercial polymeric coatings, e.g. epoxy … more
Date: May 2022
Creator: Hnatchuk, Nataliia
Item Type: Refine your search to only Thesis or Dissertation

Corrosion Behavior of High Entropy Alloys in Molten Chloride and Molten Fluoride Salts

Description: High entropy alloys (HEAs) or complex concentrated alloys (CCAs) represent a new paradigm in structural alloy design. Molten salt corrosion behavior was studied for single-phase HEAs such as TaTiVWZr and HfTaTiVZr, and multi-phase HEAs such as AlCoCrFeNi2.1. De-alloying with porosity formation along the exposed surface and fluxing of unstable oxides were found to be primary corrosion mechanisms. Potentiodynamic polarization study was combined with systematic mass–loss study for TaTiVWZr, HfTaT… more
This item is restricted from view until June 1, 2024.
Date: May 2022
Creator: Patel, Kunjalkumar Babubhai
Item Type: Refine your search to only Thesis or Dissertation

Integration, Stability, and Doping of Mono-Elemental and Binary Transition Metal Dichalcogenide Van der Waals Solids for Electronics and Sensing Devices

Description: In this work, we have explored 2D semiconducting transition metal dichalcogenides (TMDs), black phosphorus (BP), and graphene for various applications using liquid and mechanical exfoliation routes. The topical areas of interest that motivate our work include considering factors such as device integration, stability, doping, and the effect of gasses to modulate the electronic transport characteristics of the underlying 2D materials. In the first area, we have integrated solution-processed trans… more
This item is restricted from view until June 1, 2024.
Date: May 2022
Creator: Mehta, Ravindra K
Item Type: Refine your search to only Thesis or Dissertation
open access

Characterization and Chemical Analysis of Fundamental Components for Lead Acid Batteries

Description: Although markets for alternative batteries, such as Li-ion, are growing, Pb-alloy batteries still dominate the market due to their low cost and good functionality. Even though these Pb-alloy batteries have been around since their discovery in 1859, little research involving advanced characterization techniques, such as synchrotron radiation X-ray diffraction (SR-XRD) and transmission electron diffraction (TEM) have been performed on Pb-alloys and sulfation, a failure mode in lead acid batteries… more
Date: May 2022
Creator: Wall, Michael T
Item Type: Refine your search to only Thesis or Dissertation

Design and Performance of Metal Matrix Composite Composed of Porous Boron Carbide Created by Magnetic Field-Assisted Freeze Casting Infiltrated with Aluminum (A356)

Description: Magnetic field-assisted freeze-casting was used to create porous B4C ceramic preforms. An optimum slurry consisted of a mixture of B4C powders with 6 wt.% Er2O3 powder in an H2O-PVA solution and was cooled at a rate of 1 °C/min from room temperature to -30 °C resulting in porous green state ceramic preform with vertical channels. The Er2O3 powder was added to improve the magnetic response of the slurry. The preform was then sublimated to remove H2O and then sintered. The sintered ceramic prefor… more
Date: May 2022
Creator: Gamboa, Gerardo
Item Type: Refine your search to only Thesis or Dissertation
open access

Mechanically Driven Reconstruction of Materials at Sliding Interfaces to Control Wear

Description: To minimize global carbon emissions, having efficient jet engines and internal combustion engines necessitates utilizing lightweight alloys such as Al, Ti, and Mg-based alloys. Because of their remarkable strength/weight ratio, these alloys have received a lot of attention. Nonetheless, they have very poor tribological behavior, particularly at elevated temperatures beyond 200 °C, when most liquid lubricants begin to fail in lubrication. Over the last two decades, there has been a lot of intere… more
Date: May 2022
Creator: Shirani, Asghar
Item Type: Refine your search to only Thesis or Dissertation

Considerations in Designing Alloys for Laser-Powder Bed Fusion Additive Manufacturing

Description: This work identifies alloy terminal freezing range, columnar growth, grain coarsening, liquid availability towards the terminal stage of solidification, and segregation towards boundaries as primary factors affecting the hot-cracking susceptibility of fusion-based additive manufacturing (F-BAM) processed alloys. Additionally, an integrated computational materials engineering (ICME)-based approach has been formulated to design novel Al alloys, and high entropy alloys for F-BAM processing. The IC… more
This item is restricted from view until June 1, 2027.
Date: May 2022
Creator: Thapliyal, Saket
Item Type: Refine your search to only Thesis or Dissertation

Tuning of Microstructure and Mechanical Properties in Additively Manufactured Metastable Beta Titanium Alloys

Description: The results from this study, on a few commercial and model metastable beta titanium alloys, indicate that the growth restriction factor (GRF) model fails to interpret the grain growth behavior in the additively manufactured alloys. In lieu of this, an approach based on the classical nucleation theory of solidification incorporating the freezing range has been proposed for the first time to rationalize the experimental observations. Beta titanium alloys with a larger solidification range (liquid… more
This item is restricted from view until June 1, 2024.
Date: May 2022
Creator: Nartu, Mohan Sai Kiran Kumar Yadav
Item Type: Refine your search to only Thesis or Dissertation

Wear, Friction and High Shear Strain Deformation of Metallic Glasses

Description: In this work, wear and scratch behavior of four different bulk metallic glasses (BMGs) namely Zr41.2Cu12.5Ni10Ti13.8Be22.5 (LM 1), Zr57Cu15.4Ni12.6Al10Nb5 (LM 106), Ni60Pd20P17B3 (Ni-BMG), and Pt57.5Cu14.7Ni5.3P22.5 (Pt-BMG) were compared. Shear band formation on the edges of the scratch groove with spallation was found to be the primary failure mechanism in progressive scratch tests. The wear behavior and the scratch response of model binary Ni-P metallic glasses was systematically studied as … more
This item is restricted from view until June 1, 2024.
Date: May 2022
Creator: Pole, Mayur
Item Type: Refine your search to only Thesis or Dissertation
open access

Unraveling the Effect of Atomic Configurations and Structural Statistics on Mechanical Behavior of Multicomponent and Amorphous Alloys

Description: Multicomponent high-entropy and amorphous alloys represent relatively new classes of structural materials with complex atomic configurations and exceptional mechanical properties. However, there are several knowledge gaps in the relationships between their atomic structure and mechanical properties. Understanding these critical relationships will enable novel alloy design and tailoring of their mechanical properties for desired engineering applications. In this dissertation, first-principles ca… more
Date: December 2021
Creator: Yang, Yu Chia
Item Type: Refine your search to only Thesis or Dissertation

First Principles Study of the Effect of Local Bonding on Diffusion Mechanisms in Alloys

Description: This work demonstrates how local, randomized tailoring of bond stiffness can affect the activation energy of diffusion in model alloys using density functional theory-based computations. This work is organized into two parts. The first part deals with the vacancy diffusion mechanism, and it compares the in–plane (IP) vs out-of-plane (OOP) diffusion paths in prototypical binary Mg-X (Ca, Y, and Gd) and ternary Mg-X (Ca, Y, and Gd)-Zn alloys. We examine how vacancy formation, migration, and solut… more
Date: December 2021
Creator: Paranjape, Priyanvada Madhukar
Item Type: Refine your search to only Thesis or Dissertation
open access

Additive Manufacturing of AZ31B Magnesium Alloy via Friction Stir Deposition

Description: Additive friction stir deposition (AFSD) of AZ31B magnesium alloy was conducted to examine evolution of grain structure, phases, and crystallographic texture. AFSD was carried out using a hollow tool made from tool steel at a constant rotational velocity of 400 rpm on the AZ31B base plate. Bar stock of AZ31B was utilized as a feed material. The linear velocity of the tool was varied in the range of 4.2-6.3 mm/s. The feed rate of the material had to be maintained at a half value compared to the … more
Date: December 2021
Creator: Patil, Shreyash Manojkumar
Item Type: Refine your search to only Thesis or Dissertation
open access

Thermokinetics-Dependent Microstructural Evolution and Material Response in Laser-Based Additive Manufacturing

Description: Laser-based additive manufacturing offers a high degree of thermokinetic flexibility that has implications on the structure and properties of the fabricated component. However, to exploit the flexibility of this process, it is imperative to understand the process-inherent thermokinetic evolution and its effect on the material characteristics. In view of this, the present work establishes a fundamental understanding of the spatiotemporal variation of thermokinetics during the fabrication of the … more
Date: December 2021
Creator: Pantawane, Mangesh V
Item Type: Refine your search to only Thesis or Dissertation

Advanced Cathodes for High Energy Density Lithium Sulfur Battery

Description: A systematic development of 2D alloy catalyst with synergistic performance of high lithium polysulfide (LiPS) binding energy and efficient Li+ ion/electron conduction is presented. The first section of work found that Li+ ions can flow through the percolated ion transport pathway in polycrystalline MoS2, while Na+ and K+ ions can easily flow through the percolated 1D ion channel near the grain boundaries. An unusually high ionic conductivity of extrinsic Li+, Na+, and K+ ions in 2D MoS2 film ex… more
Date: December 2021
Creator: Bhoyate, Sanket
Item Type: Refine your search to only Thesis or Dissertation
Back to Top of Screen