Search Results

Design and Development of a Paper Spray Air Sampling Device for Use in Clinical, Defense, and Environmental Applications

Description: Environmental monitoring is becoming increasingly important, primarily in urban areas due to the concentrated levels of human activities. The air sampling device presented is a novel method to sample air which harnesses the power of paper spray ionization paired with the intrinsic advantages of mass spectrometry such as high sensitivity, high selectivity, high throughput, and the ability to monitor multiple compounds at once.
This item is restricted from view until January 1, 2025.
Date: December 2023
Creator: Murillo, Wilbert Alberto
open access

Magnetron Sputtering of Transition Metal Oxynitrides and Their Characterization with Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy

Description: Transition metal oxynitrides are of growing interest for their use as electrocatalyst for nitrogen reduction reaction. The metals in the oxynitride used for catalytic process are stabilized in intermediate state for effective activation of nitrogen. Therefore, studying the interaction of metal oxynitrides films to ambient exposure is necessary. Here, sputter deposited vanadium oxynitride is compared to cobalt oxynitride using insitu Auger electron spectroscopy (AES), ex situ X-ray photoelectron… more
Date: May 2023
Creator: Adesope, Qasim Adewale

An Investigation into the Micromechanical and Corrosion Properties of Additively Manufactured Stainless Steel 316L

Description: In this thesis, micro-mechanical properties and corrosion resistance of laser powder bed fusion (L-PBF) processed additive manufactured (AM) 316L stainless steel parts were investigated for different combinations of processing parameters. Various laser powers were employed for the fabrication of all AM 316L stainless steel parts. Nanoindentation, areal roughness, and electron backscattered diffraction (EBSD) characterization were used to characterize the surface of the AM samples prior to corro… more
This item is restricted from view until January 1, 2028.
Date: December 2022
Creator: England, Jennifer

Nanofluidic Membrane Based on Covalent Organic Framework: Design Strategies and Applications

Description: Nanofluidic is an emerging field of applying fluid properties in nanochannels or nanostructures. The nanoporous channel with a pore size of less than 100 nm will strongly affect the motion of the fluid. Meanwhile, the pore environment, such as hydrophilic and hydrophobic properties, charge density, and host-guest recognition would be crucial for the transportation of molecules and ions in the pore. This thesis is focused on the synthesis, characterization of nanofluidic membranes and their appl… more
Date: December 2022
Creator: Zhu, Changjia
open access

Novel LC-MS Method for the Analysis of Beta-Hydroxybutyric Acid (BHB) in Health Formulations

Description: The rise of nutraceutical health formulations has increased the need for more stringent analytical testing methods. Complex matrices present a new problem when determining concentration of compounds of interest. The presented method uses LC-MS analysis with a novel sample preparation method in the determination of Beta-hydroxybutyric acid in health formulations. The use of an aqueous analytical column allows for separations of polar compounds after non-polar compounds are removed through C18 pa… more
Date: May 2022
Creator: Smith, Garret Mackenzie

Pressure Controlled Topochemical Polymerization in Two-Dimensional Hybrid Perovskite

Description: Mechanical pressure offers unique control over the energy landscape of chemical reactions, opening up pathways that are inaccessible through conventional thermochemistry. We hypothesize that the reduced dimensionality defines the conformational space of the high-pressure reaction, giving rise to new selectivity that is unavailable in 3D systems. Here, we demonstrate this concept through the pressure-controlled topochemical polymerization of the diacetylene molecule deca‐3,5‐diyn‐1‐amine (DDA) i… more
Date: December 2021
Creator: Abu-Amara, Lama Marwan
open access

A Combined Theoretical and Experimental Study on Deposition of Solid State Materials

Description: Deposition of solid state materials span a wide variety of methods and often utilize high energy sources such as plasmas and ultra-violet light resulting in a wide variety of characteristics and applications. A fundamental understanding is essential for furthering the applications of these materials which include catalysis, molecular filtration, electronics, sensing devices, and energy storage among others. A combination of experimental and theoretical work is presented here on several material… more
Date: August 2020
Creator: Lee, Veronica
open access

Development of an Optical Carbon Dioxide Sensor and Modeling of Metal-Metal Interactions for Sensor Applications

Description: An investigation of luminescent sensing has been presented. Neutral Red, a common pH luminescent sensor, was shown to be an effective carbon dioxide sensor for the first time. Sensing experiments were performed both through fluorometric and fluorescent microscopy studies, giving rise to the possibility of carbon dioxide sensing for biological applications. Neutral Red was benchmarked against the well-established carbon dioxide sensor Pyranine (8-hydroxypyrene-1,3,6-trisulfonic acid trisodium sa… more
Date: December 2019
Creator: Ericson, Megan
open access

Spectral, Electrochemical, and Solar Cell Studies of Peripheral Modified Carboxy Zinc Porphyrins

Description: Six peripherally meso-modified Zn (II) porphyrin sensitizer dyes are designed and their J-V performance in dye sensitized solar cell (DSSC) evaluated. Electron-donating groups including phenothiazine, carbazole and pyrene are used to modify the porphyrin macrocycle at the meso-carbon position(s). To compare the effect of donor substitution on the performance of the cells in terms of short circuit current (Jsc), light harvesting efficiency (LHE) and power conversion efficiency (η), two sets of s… more
Date: May 2019
Creator: Alsaleh, Ajyal Zaki
open access

Synthesis and Characterization of Triphenylene-BODIPY Paddle Wheel Conjugates for Ultra-Fast Light Induced Charge Separation Yielding High-Energy Charge-Separated States

Description: In the development of covalent organic frameworks (COFs), often the scaffold linkers are assumed to be electro- and photoinactive, and this was also to be the case for 2,3,6,7,10,11-hexahydroxytriphenylene, a tritopic linker. However, as demonstrated in the present study, the reaction product of this linker, hexaoxatriphenylene, is electron rich and when connected to a suitable photosensitizer engages itself in an efficient excited-state charge separation process. In the present study, we have … more
Date: May 2019
Creator: Cantu, Robert
open access

Synthesis and Studies of AzaBODIPY Derived Donor-Acceptor Systems for Light Induced Charge Separation

Description: The efficiency and mechanism of electron- and energy transfer events occurring in both in natural and synthetic donor-acceptor systems depend on their distance, relative orientation, and the nature of the surrounding media. Fundamental knowledge gained from model studies is key in building efficient energy harvesting and optoelectronic devices. Faster charge separation and slower charge recombination in donor-acceptor systems is often sought out. In our continued effort to build donor-accept… more
Date: December 2018
Creator: Collini, Melissa A.
open access

Detection of Harmful Chemicals in the Air using Portable Membrane Inlet Mass Spectrometry

Description: Portable mass spectrometry has become an important analytical tool for chemical detection and identification outside of a lab setting. Many variations and applications have been developed to benefit various fields of science. Membrane inlet mass spectrometry is used to allow certain analytes to pass into the mass spectrometer without breaking vacuum or letting in large particulate matter. These two important analytical tools have been applied to the detection of harmful chemicals in the air. Ea… more
Date: August 2018
Creator: Kretsch, Amanda Renee
open access

Kinetic Study of the Reactions of Chlorine Atoms with Fluoromethane and Fluoromethane-d3 in the Gas Phase

Description: The kinetics of the gas-phase reactions of chlorine atoms with fluoromethane (CH3F) and fluoromethane-d3(CD3F) were tested experimentally. The relative rate method was applied by using CH4 as the reference compound for fluoromethane (CH3F) and CH4 and CH3F as the reference compound for fluoromethane-d3(CD3F). The rate constants for H-abstraction from CH3F and D-abstraction from CD3F were measured at room temperature and a total pressure of 920 Torr using Ar as a diluent. The rate constants are … more
Date: August 2017
Creator: Shao, Kejun
open access

Electrochemical Deposition of Nickel Nanocomposites in Acidic Solution for Increased Corrosion Resistance

Description: The optimal conditions for deposition of nickel coating and Ni-layered double hydroxide metal matrix composite coatings onto stainless steel discs in a modified all-sulfate solutions have been examined. Nickel films provide good general corrosion resistance and mechanical properties as a protective layer on many metallic substrates. In recent years, there has been interest in incorporation nano-dimensional ceramic materials, such as montemorillonite, into the metal matrices to improve upon the… more
Date: August 2017
Creator: Daugherty, Ryan E.
open access

Application of UV-Vis Spectroscopy to the Monitoring, Characterization and Analysis of Chemical Equilibria of Copper Etching Baths

Description: The continuously increasing demand for innovation in the miniaturization of microelectronics has driven the need for ever more precise fabrication strategies for device packaging, especially for printed circuit boards (PCBs). Subtractive copper etching is a fundamental step in the fabrication process, requiring very precise control of etch rate and etch factor. Changes in the etching chemical equilibrium have significant effects on etching behavior, and CuCl2 / HCl etching baths are typically m… more
Date: August 2017
Creator: Lambert, Alexander S.
open access

Synthesis and Application of New Chiral Ligands for Enantioselectivity Tuning in Transition Metal Catalysis

Description: A set of five new C3-symmetric phosphites were synthesized and tested in palladium-catalyzed asymmetric Suzuki coupling. The observed reactivity and selectivity were dependent upon several factors. One of the phosphites was able to achieve some of the highest levels of enantioselectivity in asymmetric Suzuki couplings with specific substrates. Different hypotheses have been made for understanding the ligand effects and reaction selectivities, and those hypotheses were tested via various methods… more
Date: August 2017
Creator: Kong, Fanji
open access

Kinetic Study of the Reactions of Oxygen Atoms with Nitric Oxide and Silane

Description: The rate constant for the reactions of oxygen atoms with nitric oxide and silane were determined using a discharge flow apparatus. A microwave discharge through O2N2 and Ar was used to produce oxygen atoms. The rate constant for the reaction O + NO + Ar was determined to be (7.0+0.4) x 10^32 cm^6 s^-1 and is in good agreement with previous measurements. Modeling of the O +SiH₄ reaction was performed to determine the correction to the rate constant due to secondary reactions. The rate constant f… more
Date: August 1992
Creator: Taylor, Craig A. (Craig Allan)
open access

Synthesis of Gold Complexes From Diphosphine Ligands and Screening Reactions of Heterocyclic Acetylacetonato (ACAC) Ligands with Transitional Metal Complexes

Description: Syntheses of diphosphine gold (I) complexes from gold THT and two ligands, 4, 5-bis (diphenylphosphino)-4-cyclopenten-1, 3-dione (BPCD) and 2,3-bis(diphenylphosphino)-N-phenylmaleimide (BPPM), were done separately. The reactions happened under ice conditions followed by room temperature conditions and produced two diphosphine gold (I) complexes in moderated yield. Spectroscopic results including nuclear magnetic resonance (NMR) and X-ray crystallography were used to study and determine the str… more
Date: August 2015
Creator: Nyamwihura, Rogers
open access

Applications of Single Reference Methods to Multi-Reference Problems

Description: Density functional theory is an efficient and useful method of solving single-reference computational chemistry problems, however it struggles with multi-reference systems. Modifications have been developed in order to improve the capabilities of density functional theory. In this work, density functional theory has been successfully applied to solve multi-reference systems with large amounts of non-dynamical correlation by use of modifications. It has also been successfully applied for geometr… more
Date: May 2015
Creator: Jeffrey, Chris C.
open access

Investigation Into the Causes for the Loss of Resolution in an Ion Chromatograpy Resin

Description: Four mechanisms were considered as possible causes of the loss in resolution for a Dionex CG2 ion chromatography resin: 1) presence of inorganic ions strongly bound to the active sites; 2) adsorption of organic species; 3) physical alterations; and 4) chemical alterations. The instrumental analyses used to gather data were ICP, FT-IR, SEM, solid C-13 NMR and IC. Based on the results, no metal ions are bound to the resin, no organic species are held onto the resin, and no physical change was obs… more
Date: May 1988
Creator: Galindo, Irma C. (Irma Concepcion)
open access

Organelle- and Organ-Specific Isozymes of Euglena Gracilis and Catfish

Description: Two distinct compartmentalized isozymes of aldolase and triosephosphate isomerase were examined in the photoautotrophically and heterotrophically grown green alga Euglena gracilis. A comparison of the chemical and physical properties of the isozymes was carried out. Isozymes of phosphoglucose isomerase were isolated in homogeneous form from liver and muscle tissue of the fresh water catfish. The two organ-specific isozymes were essentially identical with respect to their molecular weights but e… more
Date: December 1974
Creator: Mo, Yeh-Chun
open access

Quantitative Chemical Analysis of the Soils of Erath County, Texas

Description: A chemical analysis of representative samples of Windthorst sand, Denton sand, and Denton clay has been made, and this analysis shows that their composition has a strict correlation with respect to their geological origins. The analyses of the different soils have shown the Windthorst sand to be highly deficient in all of the essential elements, whereas the Denton sand is deficient in only one; namely, phosphorus. The analysis of the Denton clay showed it to be highly fertile. From the conside… more
Date: June 1938
Creator: Barnes, Benjamin F.
Back to Top of Screen