You limited your search to:

  Access Rights: Public
  Partner: UNT Libraries
 Degree Discipline: Electrical Engineering
 Collection: UNT Theses and Dissertations
Design of a Dual Band Gan Pa Utilizing Dual Band Impedance Transformers

Design of a Dual Band Gan Pa Utilizing Dual Band Impedance Transformers

Date: May 2013
Creator: Poe, David R.
Description: This thesis discusses the design, fabrication, and testing of a high efficiency, dual band radio frequency power amplifier. While it is difficult to demonstrate an exact mode of operation for power amplifiers at radio frequencies, based on the characteristics of the transistor itself, the argument can be made that our high efficiency performance is due to an approximation to class E operation. The PA is designed around a CGH40025 transistor manufactured by Cree, Inc, which has developed a very useful nonlinear model of its transistor, which allows use of software load/source pull methods to determine optimum impedances to be presented to the gate and drain (hereafter referred to as source and load) of the transistor at each band of operation. A recent work on dual-band impedance matching is then used to design distributed element networks in order to present conjugate matches of these impedances to the transistor. This is followed by a careful layout, after which the PA is then fabricated on a low-impedance substrate using a LPKF Protomat S63 rapid prototyping machine. Measurements of gain and drain current provide values for power-added-efficiency. Simulated gains were 21 and 18 dB at 800 MHz and 1.85 GHz, respectively, with PAE around ...
Contributing Partner: UNT Libraries
Data Transmission in Quantized Consensus

Data Transmission in Quantized Consensus

Date: May 2013
Creator: Parvez, Imtiaz
Description: In the world of networked system, average consensus is an important dimension of co-ordinate control and cooperation. Since the communication medium is digital, real value cannot be transmitted and we need to perform quantization before data transmission. But for the quantization, error is introduced in exact value and initial average is lost. Based on this limitation, my 16 bit quantization method (sending MSB in 1-4 cycle and MSB+LSB in 5th cycle) reduces error significantly and preserves initial average. Besides, it works on all types of graphs (star, complete, ring, random geometric graph). My other algorithm, distributing averaging algorithm (PQDA) with probabilistic quantization also works on random geometric graph, star, ring and slow co-herency graph. It shows significant reduced error and attain strict consensus.
Contributing Partner: UNT Libraries
Design of a Wideband Class J Power Amplifier

Design of a Wideband Class J Power Amplifier

Date: May 2013
Creator: Raavi, Srinivasa
Description: A conventional RF power amplifier will convert the low powered radio frequency signals into high powered signals. Along with the expected ability to increase the communication distance, data transfer rates, RF power amplifiers also have many applications which include military radar system, whether forecasting, etc. The main objective of any power amplifier research is to increase the efficiency while maintaining linearity and broadening the frequency of operation. The main motivation for the renewed interest in PA technology comes from the technical challenges and the economics of modern digital communication systems. Modern communications require high linear power amplifiers and in order to reduce the complete system cost, it is necessary to have a single broadband power amplifier, which can amplify multiple carriers. The improvement in the efficiency of the power amplifier increases the battery life and also reduces the cooling requirements for the same output power. In this thesis, I aim to design and build a wideband class J power amplifier suitable for modern communications. For wideband operation of the GaN technology PA, a bandwidth extension design method is studied and implemented. The simulation results are proved to have a good argument with the theoretical calculations.
Contributing Partner: UNT Libraries
Characterization of Ecg Signal Using Programmable System on Chip

Characterization of Ecg Signal Using Programmable System on Chip

Date: December 2012
Creator: Ravuru, Anusha
Description: Electrocardiography (ECG) monitor is a medical device for recording the electrical activities of the heart using electrodes placed on the body. There are many ECG monitors in the market but it is essential to find the accuracy with which they generate results. Accuracy depends on the processing of the ECG signal which contains several noises and the algorithms used for detecting peaks. Based on these peaks the abnormality in the functioning of the heart can be estimated. Hence this thesis characterizes the ECG signal which helps to detect the abnormalities and determine the accuracy of the system.
Contributing Partner: UNT Libraries
Development of Wireless Sensor Network System for Indoor Air Quality Monitoring

Development of Wireless Sensor Network System for Indoor Air Quality Monitoring

Date: December 2012
Creator: Borkar, Chirag
Description: This thesis describes development of low cost indoor air quality (IAQ) monitoring system for research. It describes data collection of various parameters concentration present in indoor air and sends data back to host PC for further processing. Thesis gives detailed information about hardware and software implementation of IAQ monitoring system. Also discussed are building wireless ZigBee network, creating user friendly graphical user interface (GUI) and analysis of obtained results in comparison with professional benchmark system to check system reliability. Throughputs obtained are efficient enough to use system as a reliable IAQ monitor.
Contributing Partner: UNT Libraries
An Interactive Tool to Investigate the Inference Performance of Network Dynamics From Data

An Interactive Tool to Investigate the Inference Performance of Network Dynamics From Data

Date: August 2012
Creator: Veenadhar, Katragadda
Description: Network structure plays a significant role in determining the performance of network inference tasks. An interactive tool to study the dependence of network topology on estimation performance was developed. The tool allows end-users to easily create and modify network structures and observe the performance of pole estimation measured by Cramer-Rao bounds. The tool also automatically suggests the best measurement locations to maximize estimation performance, and thus finds its broad applications on the optimal design of data collection experiments. Finally, a series of theoretical results that explicitly connect subsets of network structures with inference performance are obtained.
Contributing Partner: UNT Libraries
Implementation of Wireless Communications on Gnu Radio

Implementation of Wireless Communications on Gnu Radio

Date: May 2012
Creator: Njoki, Simon M.
Description: This thesis investigates the design and implementation of wireless communication system over the GNU Radio. Wireless applications are on the rise with advent of new devices, therefore there is a need to transfer the hardware complexity to software. This development enables software radio function with minimum hardware dependency. the purpose of this thesis is to design a system that will transmit compressed data via Software Defined Radio (SDR). Some parameters such as modulation scheme, bit rate can be changed to achieve the desired quality of service. in this thesis GNU (GNU’s not unix) radio is used while the hardware structure is Universal Software Radio Peripheral (USRP). in order to accomplish the goal, a compression technique called H264 (MPEG_4) encoding is applied for converting data into compressed format. the encoder was implemented in C++ to get compressed data. After encoding, the transmitter reads the compressed data and starts modulation. After modulation, the transmitter put the packets into USRP and sends it to the receiver. Once packets are received they are demodulated and then decoded to recover the original data.
Contributing Partner: UNT Libraries
1/F Baseband Noise Suppression in Ofdm Using Kalman Filter

1/F Baseband Noise Suppression in Ofdm Using Kalman Filter

Date: May 2012
Creator: Rodda, Lasya
Description: As the technology is advances the reduced size of hardware gives rise to an additive 1/f baseband noise. This additive 1/f noise is a system noise generated due to miniaturization of hardware and affects the lower frequencies. Though 1/f noise does not show much effect in wide band channels because of its nature to affect only certain frequencies, 1/f noise becomes a prominent in OFDM communication systems where narrow band channels are used. in this thesis, I study the effects of 1/f noise on the OFDM systems and implement algorithms for estimation and suppression of the noise using Kalman filter. Suppression of the noise is achieved by subtracting the estimated noise from the received noise. I show that the performance of the system is considerably improved by applying the 1/f noise suppression.
Contributing Partner: UNT Libraries
Dual-band Microwave Components And Their Applications

Dual-band Microwave Components And Their Applications

Date: December 2011
Creator: Shao, Jin
Description: In general, Dual-Band technology enables microwave components to work at two different frequencies. This thesis introduces novel dual-band microwave components and their applications. Chapter 2 presents a novel compact dual-band balun (converting unbalanced signals to balanced ones). The ratio between two working frequencies is analyzed. A novel compact microstrip crossover (letting two lines to cross each other with very high isolation) and its dual-band application is the subject of chapter 3. A dual-frequency cloak based on lumped LC-circuits is introduced in chapter 4. In chapter 5, a dual-band RF device to detect dielectric constant changes of liquids in polydimethylsiloxane (PDMS) microfluidic channels has been presented. Such a device is very sensitive, and it has significantly improved the stability. Finally, conclusion of this thesis and future works are given in chapter 6.
Contributing Partner: UNT Libraries
Automatic Extraction of Highlights from a Baseball Video Using HMM and MPEG-7 Descriptors

Automatic Extraction of Highlights from a Baseball Video Using HMM and MPEG-7 Descriptors

Date: May 2011
Creator: Saudagar, Abdullah Naseer Ahmed
Description: In today’s fast paced world, as the number of stations of television programming offered is increasing rapidly, time accessible to watch them remains same or decreasing. Sports videos are typically lengthy and they appeal to a massive crowd. Though sports video is lengthy, most of the viewer’s desire to watch specific segments of the video which are fascinating, like a home-run in a baseball or goal in soccer i.e., users prefer to watch highlights to save time. When associated to the entire span of the video, these segments form only a minor share. Hence these videos need to be summarized for effective presentation and data management. This thesis explores the ability to extract highlights automatically using MPEG-7 features and hidden Markov model (HMM), so that viewing time can be reduced. Video is first segmented into scene shots, in which the detection of the shot is the fundamental task. After the video is segmented into shots, extraction of key frames allows a suitable representation of the whole shot. Feature extraction is crucial processing step in the classification, video indexing and retrieval system. Frame features such as color, motion, texture, edges are extracted from the key frames. A baseball highlight contains certain ...
Contributing Partner: UNT Libraries
FIRST PREV 1 2 3 NEXT LAST