You limited your search to:

  Access Rights: Use restricted to UNT Community
  Partner: UNT Libraries
 Department: Department of Physics
 Collection: UNT Theses and Dissertations
Microstructure and Electronic Structures of Er-Doped Si Nano-particles Synthesized by Vapor Phase Pyrolysis

Microstructure and Electronic Structures of Er-Doped Si Nano-particles Synthesized by Vapor Phase Pyrolysis

Access: Use of this item is restricted to the UNT Community.
Date: May 2000
Creator: Chen, Yandong
Description: Si nanoparticles are new prospective optoelectronic materials. Unlike bulk Si cry-stals, Si nanoparticles display intriguing room-temperature photoluminescence. A major challenge in the fabrication of Si nanoparticles is the control of their size distribution. The rare-earth element Er has unique photo emission properties, including low pumping power, and a temperature independent, sharp spectrum. The emission wavelength matches the transmission window of optical fibers used in the telecommunications industry. Therefore, the study of Er-doped Si nanoparticles may have practical significance. The goals of the research described in this dissertation are to investigate vapor phase pyrolysis methods and to characterize the microstructure and associated defects, particles size distributions and photoluminescence efficiencies of doped and undoped Si nanoparticles using analytical transmission electron microscopy, high resolution electron microscopy, and optical spectroscopy. Er-doped and undoped Si nanoparticles were synthesized via vapor-phase pyrolysis of disilane at Texas Christian University. To achieve monodisperse size distributions, a process with fast nucleation and slow growth was employed. Disilane was diluted to 0.48% with helium. A horizontal pyrolysis oven was maintained at a temperature of 1000 °C. The oven length was varied from 1.5 cm to 6.0 cm to investigate the influence of oven length on the properties of the nanoparticles. ...
Contributing Partner: UNT Libraries
Growing carbon nanotubes by chemical vapor deposition technique.

Growing carbon nanotubes by chemical vapor deposition technique.

Access: Use of this item is restricted to the UNT Community.
Date: May 2000
Creator: Rajan, Harihar V.
Description: Carbon nanotubes were synthesized in the laboratory using chemical vapor deposition at different methane concentration. I found that a methane concentration of 4 sccm was ideal for well recognizable carbon nanotubes. A higher concentration led to fewer nanotube growth and silicon carbide structure. Coating the sample first with Fe(NO3)3 created a catalyst base on the substrate for the nanotube to adhere and grow on.
Contributing Partner: UNT Libraries
Scanning Tunneling Microscopy of Homo-epitaxial Chemical Vapor Deposited Diamond (100) Films

Scanning Tunneling Microscopy of Homo-epitaxial Chemical Vapor Deposited Diamond (100) Films

Access: Use of this item is restricted to the UNT Community.
Date: May 2000
Creator: Stallcup, Richard E.
Description: Atomic resolution images of hot-tungsten filament chemical-vapor-deposition (CVD) grown epitaxial diamond (100) films obtained in ultrahigh vacuum (UHV) with a scanning tunneling microscope (STM) are reported. A (2x1) dimer surface reconstruction and amorphous atomic regions were observed on the hydrogen terminated (100) surface. The (2x1) unit cell was measured to be 0.51"0.01 x 0.25"0.01 nm2. The amorphous regions were identified as amorphous carbon. After CVD growth, the surface of the epitaxial films was amorphous at the atomic scale. After 2 minutes of exposure to atomic hydrogen at 30 Torr and the sample temperature at 500° C, the surface was observed to consist of amorphous regions and (2x1) dimer reconstructed regions. After 5 minutes of exposure to atomic hydrogen, the surface was observed to consist mostly of (2x1) dimer reconstructed regions. These observations support a recent model for CVD diamond growth that is based on an amorphous carbon layer that is etched or converted to diamond by atomic hydrogen. With further exposure to atomic hydrogen at 500° C, etch pits were observed in the shape of inverted pyramids with {111} oriented sides. The temperature dependence of atomic hydrogen etching of the diamond (100) surface was also investigated using UHV STM, and ...
Contributing Partner: UNT Libraries
The stopping of energetic Si, P and S ions in Ni, Cu, Ge and GaAs targets.

The stopping of energetic Si, P and S ions in Ni, Cu, Ge and GaAs targets.

Access: Use of this item is restricted to the UNT Community.
Date: December 2001
Creator: Nigam, Mohit
Description: Accurate knowledge of stopping powers is essential for these for quantitative analysis and surface characterization of thin films using ion beam analysis (IBA). These values are also of interest in radiobiology and radiotherapy, and in ion- implantation technology where shrinking feature sizes puts high demands on the accuracy of range calculations. A theory that predicts stopping powers and ranges for all projectile-target combinations is needed. The most important database used to report the stopping powers is the SRIM/TRIM program developed by Ziegler and coworkers. However, other researchers report that at times, these values differ significantly from experimental values. In this study the stopping powers of Si, P and S ions have been measured in Ni, Cu, Ge and GaAs absorbers in the energy range ~ 2-10 MeV. For elemental films of Ni, Cu and Ge, the stopping of heavy ions was measured using a novel ERD (Elastic Recoil Detection) based technique. In which an elastically recoiled lighter atom is used to indirectly measure the energy of the incoming heavy ion using a surface barrier detector. In this way it was possible to reduce the damage and to improve the FWHM of the detector. The results were compared to SRIM-2000 predictions ...
Contributing Partner: UNT Libraries
Microwave Cavity Test for Superconductivity

Microwave Cavity Test for Superconductivity

Access: Use of this item is restricted to the UNT Community.
Date: December 2001
Creator: Tang, Shan
Description: The first part of this paper describes the Meissner effect in superconductors which serves as the most definitive evidence for superconductivity. It is shown that the microwave perturbation technique may be used to demonstrate this effect. By measuring the changes of resonant frequency and inverse quality factor Q of a microwave cavity with a small volume of sample loading, the Meissner effect can be shown by using the Slater perturbation equation. The experimental system is described with details and the basic principle of each component discussed. The second part of this work describes the technique employed to do the actual measurements. The experiments were conducted on samples of Gallium Arsenide (GaAs) and lead zirconate titanate (PZT) to look for the possible high temperature superconductivity properties. Results of these experiments are presented and discussed. Conclusion and suggestions to future exploration are made.
Contributing Partner: UNT Libraries
Approach to Quantum Information starting from Bell's Inequality (Part I) and Statistical Analysis of Time Series Corresponding to Complex Processes (Part II)

Approach to Quantum Information starting from Bell's Inequality (Part I) and Statistical Analysis of Time Series Corresponding to Complex Processes (Part II)

Access: Use of this item is restricted to the UNT Community.
Date: May 2002
Creator: Failla, Roberto
Description: I: Quantum information obeys laws that subtly extend those governing classical information, making possible novel effect such as cryptography and quantum computation. Quantum computations are extremely sensitive to disruption by interaction of the computer with its environment, but this problem can be overcome by recently developed quantum versions of classical error-correcting codes and fault-tolerant circuits. Based on these ideas, the purpose of this paper is to provide an approach to quantum information by analyzing and demonstrating Bell's inequality and by discussing the problems related to decoherence and error-correcting. II: The growing need for a better understanding of complex processes has stimulated the development of new and more advanced data analysis techniques. The purpose of this research was to investigate some of the already existing techniques (Hurst's rescaled range and relative dispersion analysis), to develop a software able to process time series with these techniques, and to get familiar with the theory of diffusion processes.
Contributing Partner: UNT Libraries
Monte Carlo simulation and experimental studies of the production of neutron-rich medical isotopes using a particle accelerator.

Monte Carlo simulation and experimental studies of the production of neutron-rich medical isotopes using a particle accelerator.

Access: Use of this item is restricted to the UNT Community.
Date: May 2002
Creator: Rosencranz, Daniela Necsoiu
Description: The developments of nuclear medicine lead to an increasing demand for the production of radioisotopes with suitable nuclear and chemical properties. Furthermore, from the literature it is evident that the production of radioisotopes using charged-particle accelerators instead of nuclear reactors is gaining increasing popularity. The main advantages of producing medical isotopes with accelerators are carrier free radionuclides of short lived isotopes, improved handling, reduction of the radioactive waste, and lower cost of isotope fabrication. Proton-rich isotopes are the result of nuclear interactions between enriched stable isotopes and energetic protons. An interesting observation is that during the production of proton-rich isotopes, fast and intermediately fast neutrons from nuclear reactions such as (p,xn) are also produced as a by-product in the nuclear reactions. This observation suggests that it is perhaps possible to use these neutrons to activate secondary targets for the production of neutron-rich isotopes. The study of secondary radioisotope production with fast neutrons from (p,xn) reactions using a particle accelerator is the main goal of the research in this thesis.
Contributing Partner: UNT Libraries
Random growth of interfaces: Statistical analysis of single columns and detection of critical events.

Random growth of interfaces: Statistical analysis of single columns and detection of critical events.

Access: Use of this item is restricted to the UNT Community.
Date: August 2004
Creator: Failla, Roberto
Description: The dynamics of growth and formation of surfaces and interfaces is becoming very important for the understanding of the origin and the behavior of a wide range of natural and industrial dynamical processes. The first part of the paper is focused on the interesting field of the random growth of surfaces and interfaces, which finds application in physics, geology, biology, economics, and engineering among others. In this part it is studied the random growth of surfaces from within the perspective of a single column, namely, the fluctuation of the column height around the mean value, which is depicted as being subordinated to a standard fluctuation-dissipation process with friction g. It is argued that the main properties of Kardar-Parisi-Zhang theory are derived by identifying the distribution of return times to y(0) = 0, which is a truncated inverse power law, with the distribution of subordination times. The agreement of the theoretical prediction with the numerical treatment of the model of ballistic deposition is remarkably good, in spite of the finite size effects affecting this model. The second part of the paper deals with the efficiency of the diffusion entropy analysis (DEA) when applied to the studies of stromatolites. In this case ...
Contributing Partner: UNT Libraries
Brownian Movement and Quantum Computers

Brownian Movement and Quantum Computers

Access: Use of this item is restricted to the UNT Community.
Date: December 2004
Creator: Habel, Agnieszka
Description: This problem in lieu of thesis is a discussion of two topics: Brownian movement and quantum computers. Brownian movement is a physical phenomenon in which the particle velocity is constantly undergoing random fluctuations. Chapters 2, 3 and 4, describe Brownian motion from three different perspectives. The next four chapters are devoted to the subject of quantum computers, which are the signal of a new era of technology and science combined together. In the first chapter I present to a reader the two topics of my problem in lieu of thesis. In the second chapter I explain the idea of Brownian motion, its interpretation as a stochastic process and I find its distribution function. The next chapter illustrates the probabilistic picture of Brownian motion, where the statistical averages over trajectories are related to the probability distribution function. Chapter 4 shows how to derive the Langevin equation, introduced in chapter 1, using a Hamiltonian picture of a bath with infinite number of harmonic oscillators. The chapter 5 explains how the idea of quantum computers was developed and how step-by-step all the puzzles for the field of quantum computers were created. The next chapter, chapter 6, discus the basic quantum unit of information ...
Contributing Partner: UNT Libraries
Characterization, properties and applications of novel nanostructured hydrogels.

Characterization, properties and applications of novel nanostructured hydrogels.

Access: Use of this item is restricted to the UNT Community.
Date: December 2006
Creator: Tang, Shijun
Description: The characterization, properties and applications of the novel nanostructured microgel (nanoparticle network and microgel crystal) composed of poly-N-isopropylacrylanmide-co-allylamine (PNIPAM-co-allylamine) and PNIPAM-co-acrylic acid(AA) have been investigated. For the novel nanostructured hydrogels with the two levels of structure: the primary network inside each individual particle and the secondary network of the crosslinked nanoparticles, the new shear modulus, drug release law from hydrogel with heterogeneous structure have been studied. The successful method for calculating the volume fraction related the phase transition of colloid have been obtained. The kinetics of crystallization in an aqueous dispersion of PNIPAM particles has been explored using UV-visible transmission spectroscopy. This dissertation also includes the initial research on the melting behavior of colloidal crystals composed of PNIPAM microgels. Many new findings in this study area have never been reported before. The theoretical model for the columnar crystal growth from the top to bottom of PNIPAM microgel has been built, which explains the growth mechanism of the novel columnar hydrogel colloidal crystals. Since the unique structure of the novel nanostructured hydrogels, their properties are different with the conventional hydrogels and the hard-sphere-like system. The studies and results in this dissertation have the important significant for theoretical study and valuable application ...
Contributing Partner: UNT Libraries
FIRST PREV 1 2 NEXT LAST