You limited your search to:

  Partner: UNT Libraries
 Degree Discipline: Physics
Growing carbon nanotubes by chemical vapor deposition technique.

Growing carbon nanotubes by chemical vapor deposition technique.

Access: Use of this item is restricted to the UNT Community.
Date: May 2000
Creator: Rajan, Harihar V.
Description: Carbon nanotubes were synthesized in the laboratory using chemical vapor deposition at different methane concentration. I found that a methane concentration of 4 sccm was ideal for well recognizable carbon nanotubes. A higher concentration led to fewer nanotube growth and silicon carbide structure. Coating the sample first with Fe(NO3)3 created a catalyst base on the substrate for the nanotube to adhere and grow on.
Contributing Partner: UNT Libraries
Nonlinear UV Laser Build-up Cavity: An Efficient Design

Nonlinear UV Laser Build-up Cavity: An Efficient Design

Date: May 2009
Creator: Rady, Nicholas Henry
Description: Using the concept of the build-up cavity for second harmonic generation to produce 243nm laser light, an innovative cavity is theoretically explored using a 15mm length CLBO crystal. In order to limit the losses of the cavity, the number of effective optical surfaces is kept to only four and the use of a MgF2 crystal is adopted to separate the harmonic and fundamental laser beam from each other. The cavity is shown to have an expected round trip loss of five tenths of a percent or better, resulting in a conversion efficiency greater than 65%.
Contributing Partner: UNT Libraries
A Reverberation Time Meter

A Reverberation Time Meter

Date: 1950
Creator: Stockard, Raymond
Description: This thesis describes the construction of an apparatus to measure reverberation time.
Contributing Partner: UNT Libraries
Studying Interactions of Gas Molecules with Nanomaterials Loaded in a Microwave Resonant Cavity

Studying Interactions of Gas Molecules with Nanomaterials Loaded in a Microwave Resonant Cavity

Date: August 2007
Creator: Anand, Aman
Description: A resonant cavity operating in TE011 mode was used to study the adsorption response of single walled carbon nanotubes (SWCNTs) and other nanomaterials for different types of gas molecules. The range of the frequency signal as a probe was chosen as geometry dependent range between 9.1 -9.8 GHz. A highly specific range can be studied for further experiments dependent on the type of molecule being investigated. It was found that for different pressures of gases and for different types of nanomaterials, there was a different response in the shifts of the probe signal for each cycle of gassing and degassing of the cavity. This dissertation suggests that microwave spectroscopy of a complex medium of gases and carbon nanotubes can be used as a highly sensitive technique to determine the complex dielectric response of different polar as well as non-polar gases when subjected to intense electromagnetic fields within the cavity. Also, as part of the experimental work, a range of other micro-porous materials was tested using the residual gas analysis (RGA) technique to determine their intrinsic absorption/adsorption characteristics when under an ultra-high vacuum environment. The scientific results obtained from this investigation, led to the development of a chemical biological sensor prototype. ...
Contributing Partner: UNT Libraries
Ion Beam Synthesis of Carbon Assisted Nanosystems in Silicon Based Substrates

Ion Beam Synthesis of Carbon Assisted Nanosystems in Silicon Based Substrates

Date: May 2011
Creator: Poudel, Prakash Raj
Description: The systematic study of the formation of β-SiC formed by low energy carbon ion (C-)implantation into Si followed by high temperature annealing is presented. The research is performed to explore the optimal annealing conditions. The formation of crystalline β-SiC is clearly observed in the sample annealed at 1100 °C for a period of 1 hr. Quantitative analysis is performed in the formation of β-SiC by the process of implantation of different carbon ion fluences of 1×1017, 2×1017, 5×1017, and 8×1017 atoms /cm2 at an ion energy of 65 keV into Si. It is observed that the average size of β-SiC crystals decreased and the amount of β-SiC crystals increased with the increase in the implanted fluences when the samples were annealed at 1100°C for 1 hr. However, it is observed that the amount of β-SiC linearly increased with the implanted fluences up to 5×1017 atoms /cm2. Above this fluence the amount of β-SiC appears to saturate. The stability of graphitic C-C bonds at 1100°C limits the growth of SiC precipitates in the sample implanted at a fluence of 8×1017 atoms /cm2 which results in the saturation behavior of SiC formation in the present study. Secondly, the carbon cluster formation process ...
Contributing Partner: UNT Libraries
Thorium and Uranium M-shell X-ray Production Cross Sections for 0.4 – 4.0 MeV Protons, 0.4 - 6.0 MeV Helium Ions, 4.5 – 11.3 MeV Carbon Ions, and 4.5 – 13.5 MeV Oxygen Ions.

Thorium and Uranium M-shell X-ray Production Cross Sections for 0.4 – 4.0 MeV Protons, 0.4 - 6.0 MeV Helium Ions, 4.5 – 11.3 MeV Carbon Ions, and 4.5 – 13.5 MeV Oxygen Ions.

Date: May 2011
Creator: Phinney, Lucas C.
Description: The M-shell x-ray production cross section for thorium and uranium have been determined for protons of energy 0.4 - 4.0 MeV, helium ions of energy 0.4 - 6.0 MeV, carbon ions of energy 4.5 - 11.3 MeV and oxygen ions of energy 4.5 - 13.5 MeV. The total cross sections and the cross sections for individual x-ray peaks in the spectrum, consisting of the following transitions Mz (M4-N2, M5-N3, M4-N3), Ma (M5-N6,7), Mb (M4-N6, M5-O3, M4- O2), and Mg (M4-O3, M5-P3, M3-N4, M3-N5), were compared to the theoretical values determined from the PWBA + OBKN and ECUSAR. The theoretical values for the carbon and oxygen ions were also modified to take into account the effects of multiple ionizations of the target atom by the heavier ions. It is shown that the results of the ECUSAR theory tend to provide better agreement with the experimental data.
Contributing Partner: UNT Libraries
The Effect of Average Grain Size on Polycrystalline Diamond Films

The Effect of Average Grain Size on Polycrystalline Diamond Films

Date: May 2002
Creator: Abbott, Patrick Roland
Description: The work function of hydrogen-terminated, polycrystalline diamond was studied using ultraviolet photoelectron spectroscopy. Polycrystalline diamond films were deposited onto molybdenum substrates by electrophoresis for grain sizes ranging from 0.3 to 108 microns. The work function and electron affinity were measured using 21.2 eV photons from a helium plasma source. The films were characterized by x-ray photoelectron spectroscopy to determine elemental composition and the sp2/sp3 carbon fraction. The percentage of (111) diamond was determined by x-ray diffraction, and scanning electron microscopy was performed to determine average grain size. The measured work function has a maximum of 5.1 eV at 0.3 microns, and decreases to 3.2 eV at approximately 4 microns. Then the work function increases with increasing grain size to 4.0 eV at 15 microns and then asymptotically approaches the 4.8 eV work function of single crystal diamond at 108 microns. These results are consistent with a 3-component model in which the work function is controlled by single-crystal (111) diamond at larger grain sizes, graphitic carbon at smaller grain sizes, and by the electron affinity for the intervening grain sizes.
Contributing Partner: UNT Libraries
Carbon nanotube/microwave interactions and applications to hydrogen fuel cells.

Carbon nanotube/microwave interactions and applications to hydrogen fuel cells.

Access: Use of this item is restricted to the UNT Community.
Date: May 2004
Creator: Imholt, Timothy James
Description: One of the leading problems that will be carried into the 21st century is that of alternative fuels to get our planet away from the consumption of fossil fuels. There has been a growing interest in the use of nanotechnology to somehow aid in this progression. There are several unanswered questions in how to do this. It is known that carbon nanotubes will store hydrogen but it is unclear how to increase that storage capacity and how to remove this hydrogen fuel once stored. This document offers some answers to these questions. It is possible to implant more hydrogen in a nanotube sample using a technique of ion implantation at energy levels ~50keV and below. This, accompanied with the rapid removal of that stored hydrogen through the application of a microwave field, proves to be one promising avenue to solve these two unanswered questions.
Contributing Partner: UNT Libraries
Dipole Moments of Olefenic Diesters

Dipole Moments of Olefenic Diesters

Date: 1951
Creator: Shipley, Floyd D.
Description: It is the purpose of this paper to present experimental data for the determination of the dielectric constant and the dipole moments for a series of olefenic diesters of the cis and trans configurations.
Contributing Partner: UNT Libraries
A Deuterium-Deuterium Type Neutron Source

A Deuterium-Deuterium Type Neutron Source

Date: 1951
Creator: Windham, Pat M.
Description: In view of the advantages of its type, the decision to construct a neutron source of the particle accelerator type was made. The purpose of this thesis is to survey the problems encountered in the construction of the source.
Contributing Partner: UNT Libraries