You limited your search to:

  Partner: UNT Libraries
 Department: Department of Electrical Engineering
 Collection: UNT Theses and Dissertations
A 018μm Cmos Transmitter for Ecg Signals

A 018μm Cmos Transmitter for Ecg Signals

Date: December 2013
Creator: Kakarna, Tejaswi
Description: Electrocardiography (ECG) signal transmitter is the device used to transmit the electrical signals of the heart to the remote machine. These electrical signals are ECG signals caused due to electrical activities in the heart. ECG signals have very low amplitude and frequency; hence amplification of the signals is needed to strengthen the signal. Conversion of the amplified signal into digital information and transmitting that information without losing any data is the key. This information is further used in monitoring the heart.
Contributing Partner: UNT Libraries
AirSniffer: A Smartphone-Based Sensor Module for Personal Micro-Climate Monitoring

AirSniffer: A Smartphone-Based Sensor Module for Personal Micro-Climate Monitoring

Date: May 2016
Creator: Smith, Jeffrey Paul
Description: Environmental factors can have a significant impact on an individual's health and well-being, and a primary characteristic of environments is air quality. Air sensing equipment is available to the public, but it is often expensive,stationary, or unusable for persons without technical expertise. The goal of this project is to develop an inexpensive and portable sensor module for public use. The system is capable of measuring temperature in Celsius and Fahrenheit, heat index, relative humidity, and carbon dioxide concentration. The sensor module, referred to as the "sniffer," consists of a printed circuit board that interconnects a carbon dioxide sensor, a temperature/humidity sensor, an Arduino microcontroller, and a Bluetooth module. The sniffer is small enough to be worn as a pendant or a belt attachment, and it is rugged enough to consistently collect and transmit data to a user's smartphone throughout their workday. The accompanying smartphone app uses Bluetooth and GPS hardware to collect data and affix samples with a time stamp and GPS coordinates. The accumulated sensor data is saved to a file on the user's phone, which is then examined on a standard computer.
Contributing Partner: UNT Libraries
An Application of Digital Video Recording and Off-grid Technology to Burrowing Owl Conservation Research

An Application of Digital Video Recording and Off-grid Technology to Burrowing Owl Conservation Research

Date: August 2014
Creator: Williams, Jennifer M.
Description: Through this research, engineering students and conservation biologists constructed an off-grid video system for observing western burrowing owls in El Paso, Texas. The burrowing owl has a declining population and their range decreasing, driving scientists' interest to see inside the den for observing critical nesting behavior. Texas Parks and Wildlife Department (TPWD) biologists wanted videos from inside the dark, isolated hillside owl burrows. This research yielded a replicable multi-camera prototype, empowering others to explore applications of engineering and wildlife monitoring. The remote station used an off-the-shelf video recording system, solar panels, charge controller, and lead acid batteries. Four local K-12 science educators participated in system testing at Lake Ray Roberts State Park through the Research Experiences for Teachers (RET, NSF #1132585) program, as well as four undergraduate engineering students as senior design research.
Contributing Partner: UNT Libraries
An Arduino Based Control System for a Brackish Water Desalination Plant

An Arduino Based Control System for a Brackish Water Desalination Plant

Date: August 2015
Creator: Caraballo, Ginna
Description: Water scarcity for agriculture is one of the most important challenges to improve food security worldwide. In this thesis we study the potential to develop a low-cost controller for a small scale brackish desalination plant that consists of proven water treatment technologies, reverse osmosis, cation exchange, and nanofiltration to treat groundwater into two final products: drinking water and irrigation water. The plant is powered by a combination of wind and solar power systems. The low-cost controller uses Arduino Mega, and Arduino DUE, which consist of ATmega2560 and Atmel SAM3X8E ARM Cortex-M3 CPU microcontrollers. These are widely used systems characterized for good performance and low cost. However, Arduino also requires drivers and interfaces to allow the control and monitoring of sensors and actuators. The thesis explains the process, as well as the hardware and software implemented.
Contributing Partner: UNT Libraries
Automatic Extraction of Highlights from a Baseball Video Using HMM and MPEG-7 Descriptors

Automatic Extraction of Highlights from a Baseball Video Using HMM and MPEG-7 Descriptors

Date: May 2011
Creator: Saudagar, Abdullah Naseer Ahmed
Description: In today’s fast paced world, as the number of stations of television programming offered is increasing rapidly, time accessible to watch them remains same or decreasing. Sports videos are typically lengthy and they appeal to a massive crowd. Though sports video is lengthy, most of the viewer’s desire to watch specific segments of the video which are fascinating, like a home-run in a baseball or goal in soccer i.e., users prefer to watch highlights to save time. When associated to the entire span of the video, these segments form only a minor share. Hence these videos need to be summarized for effective presentation and data management. This thesis explores the ability to extract highlights automatically using MPEG-7 features and hidden Markov model (HMM), so that viewing time can be reduced. Video is first segmented into scene shots, in which the detection of the shot is the fundamental task. After the video is segmented into shots, extraction of key frames allows a suitable representation of the whole shot. Feature extraction is crucial processing step in the classification, video indexing and retrieval system. Frame features such as color, motion, texture, edges are extracted from the key frames. A baseball highlight contains certain ...
Contributing Partner: UNT Libraries
Baseband Noise Suppression in Ofdm Using Kalman Filter

Baseband Noise Suppression in Ofdm Using Kalman Filter

Date: May 2012
Creator: Rodda, Lasya
Description: As the technology is advances the reduced size of hardware gives rise to an additive 1/f baseband noise. This additive 1/f noise is a system noise generated due to miniaturization of hardware and affects the lower frequencies. Though 1/f noise does not show much effect in wide band channels because of its nature to affect only certain frequencies, 1/f noise becomes a prominent in OFDM communication systems where narrow band channels are used. in this thesis, I study the effects of 1/f noise on the OFDM systems and implement algorithms for estimation and suppression of the noise using Kalman filter. Suppression of the noise is achieved by subtracting the estimated noise from the received noise. I show that the performance of the system is considerably improved by applying the 1/f noise suppression.
Contributing Partner: UNT Libraries
A Bidirectional Two-Hop Relay Network Using GNU Radio and USRP

A Bidirectional Two-Hop Relay Network Using GNU Radio and USRP

Date: August 2011
Creator: Le, Johnny
Description: A bidirectional two-hop relay network with decode-and-forward strategy is implemented using GNU Radio (software) and several USRPs (hardware) on Ubuntu (operating system). The relay communication system is comprised of three nodes; Base Station A, Base Station B, and Relay Station (the intermediate node). During the first time slot, Base Station A and Base Station B will each transmit data, e.g., a JPEG file, to Relay Station using DBPSK modulation and FDMA. For the final time slot, Relay Station will perform a bitwise XOR of the data, and transmit the XORed data to Base Station A and Base Station B, where the received data is decoded by performing another XOR operation with the original data.
Contributing Partner: UNT Libraries
Characterization of Ecg Signal Using Programmable System on Chip

Characterization of Ecg Signal Using Programmable System on Chip

Date: December 2012
Creator: Ravuru, Anusha
Description: Electrocardiography (ECG) monitor is a medical device for recording the electrical activities of the heart using electrodes placed on the body. There are many ECG monitors in the market but it is essential to find the accuracy with which they generate results. Accuracy depends on the processing of the ECG signal which contains several noises and the algorithms used for detecting peaks. Based on these peaks the abnormality in the functioning of the heart can be estimated. Hence this thesis characterizes the ECG signal which helps to detect the abnormalities and determine the accuracy of the system.
Contributing Partner: UNT Libraries
Communication System over Gnu Radio and OSSIE

Communication System over Gnu Radio and OSSIE

Date: December 2011
Creator: Cheng, Zizhi
Description: GNU Radio and OSSIE (Open-Source SCA (Software communication architecture) Implementation-Embedded) are two open source software toolkits for SDR (Software Defined Radio) developments, both of them can be supported by USRP (Universal Software Radio Peripheral). In order to compare the performance of these two toolkits, an FM receiver over GNU Radio and OSSIE are tested in my thesis, test results are showed in Chapter 4 and Chapter 5. Results showed that the FM receiver over GNU Radio has better performance, due to the OSSIE is lack of synchronization between USRP interface and the modulation /demodulation components. Based on this, the SISO (Single Input Single Output) communication system over GNU Radio is designed to transmit and receive sound or image files between two USRP equipped with RFX2400 transceiver at 2.45G frequency. Now, GNU Radio and OSSIE are widely used for academic research, but the future work based on GNU Radio and OSSIE can be designed to support MIMO, sensor network, and real time users etc.
Contributing Partner: UNT Libraries
Comparison of Source Diversity and Channel Diversity Methods on Symmetric and Fading Channels.

Comparison of Source Diversity and Channel Diversity Methods on Symmetric and Fading Channels.

Date: August 2009
Creator: Li, Li
Description: Channel diversity techniques are effective ways to combat channel fading and noise in communication systems. In this thesis, I compare the performance of source and channel diversity techniques on fading and symmetric continuous channels. My experiments suggest that when SNR is low, channel diversity performs better, and when SNR is high, source diversity shows better performance than channel diversity.
Contributing Partner: UNT Libraries
FIRST PREV 1 2 3 4 5 NEXT LAST