UNT Libraries - 250 Matching Results

Search Results

Results: 1 - 24 next
open access

Determining the Emissivity of Roofing Samples: Asphalt, Ceramic and Coated Cedar

Description: The goal is to perform heat measurements examine of selected roofing material samples. Those roofing materials are asphalt shingles, ceramics, and cedar. It’s important to understand the concept of heat transfer, which consists of conduction, convection, and radiation. Research work was reviewed on different infrared devices to see which one would be suitable for conducting my experiment. In this experiment, the main focus was on a specific property of radiation. That property is the emissivit… more
Date: December 2015
Creator: Adesanya, Oludamilola
Item Type: Refine your search to only Thesis or Dissertation
open access

Processing, Structure and Tribological Property Relations of Ternary Zn-Ti-O and Quaternary Zn-Ti-Zr-O Nanocrystalline Coatings

Description: Conventional liquid lubricants are faced with limitations under extreme cyclic operating conditions, such as in applications that require lubrication when changing from atmospheric pressure to ultrahigh vacuum and ambient air to dry nitrogen (e.g., satellite components), and room to elevated (>500°C) temperatures (e.g., aerospace bearings). Alternatively, solid lubricant coatings can be used in conditions where synthetic liquid lubricants and greases are not applicable; however, individual sol… more
Date: August 2014
Creator: Ageh, Victor
Item Type: Refine your search to only Thesis or Dissertation

Processing-Structure-Property Correlation for Additively Manufactured Metastable High Entropy Alloy

Description: In the present study both fusion based - laser powder bed fusion (LPBF), and solid state - additive friction stir deposition (AFSD) additive manufacturing processes were employed for the manufacturing of a metastable high entropy alloy (HEA), Fe40Mn20Co20Cr15Si5 (CS-HEA). A processing window was developed for the LPBF and AFSD processings of CS-HEA. In case of LPBF, formation of solidification related defects such as lack of fusion pores (for energy density ≤ 31.24 J/mm3) and keyhole pores (for… more
Date: August 2022
Creator: Agrawal, Priyanshi
Item Type: Refine your search to only Thesis or Dissertation

Thermodynamics, Kinetics and Mechanical Behavior of Model Metallic Glasses

Description: The thermophysical properties and deformation behavior of a systematic series of model metallic glasses was investigated. For Zr-based metallic glasses with all metallic constituents, the activation energy of glass transition was determined to be in the range of 74-173 kJ/mol while the activation energy of crystallization was in the range of 155-170 kJ/mol. The reduced glass transition temperature was roughly the same for all the alloys (~ 0.6) while the supercooled liquid region was in the ran… more
This item is restricted from view until January 1, 2026.
Date: December 2023
Creator: Akhtar, Mst Alpona
Item Type: Refine your search to only Thesis or Dissertation

Processing and Shape-Setting of Shape Memory Alloys for Small Satellite Antennas

Description: In this study, four different NiTi-based shape memory alloys (SMAs) compositions were processed, shape-set, and characterized to evaluate their effectiveness as SMA actuation component for satellite antennas. Three of the compositions were commercially available NiTi wires (90°C Flexinol® actuator NiTi wire and Confluent ADB SE508 NiTi wire), NiTi SM495 plates (ATI Specialty Alloys and Components) and the other composition was in house lab-produced NiTiCu plate. Different shape-setting techniqu… more
Date: December 2022
Creator: Al Jabri, Nehal Ahmed Mubarak
Item Type: Refine your search to only Thesis or Dissertation
open access

Tribocatalytically-Active Coatings for Enhanced Tribological Performance and Carbon-Based Tribofilm Formation

Description: In this study, we investigate the fundamental mechanisms defining the approach for addressing tribological challenges in mechanical systems via the use of the tribocatalytically active coating. The coating is designed using an electrodeposition process and consists of a hard amorphous cobalt-phosphorous matrix with the incorporation of tribocatalytically-active nickel and copper. Our focus is on understanding the effect of the tribocatalytic elements, Cu vs Ni, on the coating's performance in h… more
Date: July 2023
Creator: Al Sulaimi, Rawan
Item Type: Refine your search to only Thesis or Dissertation

Investigation of the Processing-Induced Transition from Shape Memory to Strain Glass of Ni-Ti and Fe-Mn-Al-Cr-Ni Alloys

Description: In this study, we observed the effects of the processing-induced method on two different shape memory alloys (SMAs). First, we compare the transformation behavior of a martensitic NiTi SMA during thermal cycling using wide angle synchrotron radiation X-ray diffraction (WAXS). Based on the thermal cycling results, three observations about processing-induced SGAs as compared to SMAs can be seen: (1) retention of distorted austenite at high and low temperatures, (2) broadening of diffraction peaks… more
Date: December 2022
Creator: Ashmore, Bailey Nicole
Item Type: Refine your search to only Thesis or Dissertation
open access

Laser Deposition, Heat-treatment, and Characterization of the Binary Ti-xmn System

Description: The present research seeks to characterization of an additively manufactured and heat-treated Ti-xMn gradient alloy, a binary system that has largely been unexplored. In order to rapidly assess this binary system, compositionally graded Ti-xMn (0<x<15 wt%) specimens were fabricated using the LENS (Laser Engineered Net Shaping) and were subsequently heat-treated and characterized using a wide range of techniques. Microstructural changes with respect to the change in thermal treatments, hardness … more
Date: August 2013
Creator: Avasarala, Chandana
Item Type: Refine your search to only Thesis or Dissertation
open access

Surface Degradation Behavior of Bulk Metallic Glasses and High Entropy Alloys

Description: In this study, the surface degradation behavior was studied for typical examples from bulk metallic glasses (BMGs), metallic glass composites (MGCs) and high entropy alloys (HEAs) alloy systems that are of scientific and commercial interest. The corrosion and wear behavior of two Zr-based bulk metallic glasses, Zr41.2Cu12.5Ni10Ti13.8Be22.5 and Zr57Cu15.4Ni12.6Al10Nb5, were evaluated in as-cast and thermally relaxed states. Significant improvement in corrosion rate, wear behavior, and friction c… more
Date: December 2017
Creator: Ayyagari, Venkata A
Item Type: Refine your search to only Thesis or Dissertation
open access

Effect of Alloy Composition, Free Volume and Glass Formability on the Corrosion Behavior of Bulk Metallic Glasses

Description: Bulk metallic glasses (BMGs) have received significant research interest due to their completely amorphous structure which results in unique structural and functional properties. Absence of grain boundaries and secondary phases in BMGs results in high corrosion resistance in many different environments. Understanding and tailoring the corrosion behavior can be significant for various structural applications in bulk form as well as coatings. In this study, the corrosion behavior of several Zr-ba… more
Date: December 2015
Creator: Ayyagari, Venkata Aditya
Item Type: Refine your search to only Thesis or Dissertation
open access

Corrosion Protection of Aerospace Grade Magnesium Alloy Elektron 43™ for Use in Aircraft Cabin Interiors

Description: Magnesium alloys exhibit desirable properties for use in transportation technology. In particular, the low density and high specific strength of these alloys is of interest to the aerospace community. However, the concerns of flammability and susceptibility to corrosion have limited the use of magnesium alloys within the aircraft cabin. This work studies a magnesium alloy containing rare earth elements designed to increase resistance to ignition while lowering rate of corrosion. The microst… more
Date: August 2013
Creator: Baillio, Sarah S.
Item Type: Refine your search to only Thesis or Dissertation

Investigation of Porous Ceramic Structure by Freeze-Casting

Description: The design and fabrication of porous ceramic materials with anisotropic properties has, in recent years, gained popularity due to their potential application in various areas that include medical, energy, defense, space, and aerospace. Freeze-casting is an effective, low-cost, and safe method as a wet shaping technique to create these structures. To control the morphology of these materials, many critical factors were found to play an important role. In this dissertation, the processing paramet… more
Date: May 2021
Creator: Bakkar, Said Adnan
Item Type: Refine your search to only Thesis or Dissertation
open access

High Temperature Water as an Etch and Clean for SiO2 and Si3N4

Description: An environmentally friendly, and contamination free process for etching and cleaning semiconductors is critical to future of the IC industry. Under the right conditions, water has the ability to meet these requirements. Water becomes more reactive as a function of temperature in part because the number of hydronium and hydroxyl ions increase. As water approaches its boiling point, the concentration of these species increases over seven times their concentrations at room temperature. At 150 °C, … more
Date: December 2018
Creator: Barclay, Joshua David
Item Type: Refine your search to only Thesis or Dissertation
open access

A Study of Mechanisms to Engineer Fine Scale Alpha Phase Precipitation in Beta Titanium Alloy, Beta 21S

Description: Metastable b-Ti alloys are titanium alloys with sufficient b stabilizer alloying additions such that it's possible to retain single b phase at room temperature. These alloys are of great advantage compared to a/b alloys since they are easily cold rolled, strip produced and can attain excellent mechanical properties upon age hardening. Beta 21S, a relatively new b titanium alloy in addition to these general advantages is known to possess excellent oxidation and corrosion resistance at elevated t… more
Date: August 2013
Creator: Behera, Amit Kishan
Item Type: Refine your search to only Thesis or Dissertation

Advanced Cathodes for High Energy Density Lithium Sulfur Battery

Description: A systematic development of 2D alloy catalyst with synergistic performance of high lithium polysulfide (LiPS) binding energy and efficient Li+ ion/electron conduction is presented. The first section of work found that Li+ ions can flow through the percolated ion transport pathway in polycrystalline MoS2, while Na+ and K+ ions can easily flow through the percolated 1D ion channel near the grain boundaries. An unusually high ionic conductivity of extrinsic Li+, Na+, and K+ ions in 2D MoS2 film ex… more
Date: December 2021
Creator: Bhoyate, Sanket
Item Type: Refine your search to only Thesis or Dissertation
open access

Characterization of Cure Kinetics and Physical Properties of a High Performance, Glass Fiber-Reinforced Epoxy Prepreg and a Novel Fluorine-Modified, Amine-Cured Commercial Epoxy.

Description: Kinetic equation parameters for the curing reaction of a commercial glass fiber reinforced high performance epoxy prepreg composed of the tetrafunctional epoxy tetraglycidyl 4,4-diaminodiphenyl methane (TGDDM), the tetrafunctional amine curing agent 4,4'-diaminodiphenylsulfone (DDS) and an ionic initiator/accelerator, are determined by various thermal analysis techniques and the results compared. The reaction is monitored by heat generated determined by differential scanning calorimetry (DSC) a… more
Date: December 2003
Creator: Bilyeu, Bryan
Item Type: Refine your search to only Thesis or Dissertation
open access

Nanohybrids Based on Solid and Foam Polyurethanes

Description: Polymer nanocomposites are a going part of Materials Science and Engineering. These new composite materials exhibit dimensional and thermal stability of inorganic materials and toughness and dielectric properties of polymers. Development of nanocomposites become an important approach to create high-performance composite materials. In this study silica, fly ash, silica nanotubes and carbon black particles have been added to modify polyurethane foam and thermoplastic polyurethanes. It has been fo… more
Date: May 2015
Creator: Bo, Chong
Item Type: Refine your search to only Thesis or Dissertation
open access

Processing and Characterization of Nickel-Carbon Base Metal Matrix Composites

Description: Carbon nanotubes (CNTs) and graphene nanoplatelets (GNPs) are attractive reinforcements for lightweight and high strength metal matrix composites due to their excellent mechanical and physical properties. The present work is an attempt towards investigating the effect of CNT and GNP reinforcements on the mechanical properties of nickel matrix composites. The CNT/Ni (dry milled) nanocomposites exhibiting a tensile yield strength of 350 MPa (about two times that of SPS processed monolithic nickel… more
Date: May 2014
Creator: Borkar, Tushar Murlidhar
Item Type: Refine your search to only Thesis or Dissertation
open access

An Assessment of Uncommon Titanium Binary Systems: Ti-Zn, Ti-Cu, and Ti-Sb

Description: The current study focuses on phase stability and evolution in the titanium-zinc titanium-copper and titanium-antimony systems. The study utilized the Laser Engineering Net Shaping (LENS™) processing technique to deposit compositionally graded samples of three binary system in order to allow the assessment of phase stability and evolution as a function of composition and temperature the material is subjected to. Through LENS™ processing it was possible to create graded samples from Ti-xSb (up … more
Date: May 2015
Creator: Brice, David
Item Type: Refine your search to only Thesis or Dissertation
open access

Processing of NiTi Shape Memory Alloys through Low Pressure and Low Temperature Hydrogen Charging

Description: Many industries including the medical, aerospace, and automobile industries have increasingly adopted the use of shape memory alloys (SMAs) for a plethora of applications due to their unique thermomechanical properties. From the commercially available SMAs in the market, binary NiTi SMAs have shown the most desirable properties. However, SMA properties can be significantly affected by the fabrication process. One of the most familiar applications of NiTi SMAs is in the design of actuating devic… more
Date: May 2018
Creator: Briseno Murguia, Silvia
Item Type: Refine your search to only Thesis or Dissertation

Development of a Novel Grease Resistant Functional Coatings for Paper-based Packaging and Assessment of Application by Flexographic Press

Description: Recent commercial developments have created a need for alternative materials and methods for imparting oil/grease resistance to paper and/or paperboard used in packaging. The performance of a novel grease resistant functional coating comprised of polyvinyl alcohol (PVA), sodium tetraborate pentahydrate (borate) and acetonedicarboxylic acid (ACDA) and the application of said coating by means of flexographic press is presented herein. Application criteria is developed, testing procedures describe… more
Access: Restricted to UNT Community Members. Login required if off-campus.
Date: August 2004
Creator: Brown, Robert W.
Item Type: Refine your search to only Thesis or Dissertation
open access

Charge Interaction Effects in Epoxy with Cation Exchanged Montmorillonite Clay and Carbon Nanotubes.

Description: The influence of charge heterogeneity in nanoparticles such as montmorillonite layered silicates (MLS) and hybrid systems of MLS + carbon nanotubes was investigated in cured and uncured epoxy. Epoxy nanocomposites made with cation-exchanged montmorillonite clay were found to form agglomerates near a critical concentration. Using differential scanning calorimetry it was determined that the mixing temperature of the epoxy + MLS mixture prior to the addition of the curing agent critically influenc… more
Date: May 2005
Creator: Butzloff, Peter Robert
Item Type: Refine your search to only Thesis or Dissertation

The Effect of Processing Conditions on the Surface Morphology of Few-Layered WS2 Thin Films

Description: Recent progress in layered transition metal dichalcogenides (TMDs) has led to various promising electronic and optoelectronic applications. However, the structure of materials plays a critical role in electronic and optoelectronic devices, and determines performance. Electronic and optoelectronic devices typically consist of multiple layers that form electrical homojunctions or heterojunctions. Therefore, in a device it can be expected that a WS2 layer may serve as the substrate for a subseque… more
Access: Restricted to UNT Community Members. Login required if off-campus.
Date: May 2019
Creator: Cai, Bimin
Item Type: Refine your search to only Thesis or Dissertation

Synthesis and Characterization of Crystalline Assemblies of Functionalized Hydrogel Nanoparticles

Description: Two series monodispersed nanoparticles of hydroxylpropyl cellulose (HPC) and functionalized poly-N-isopropylamide (PNIPAM) particles have been synthesized and used as building blocks for creating three-dimensional networks, with two levels of structural hierarchy. The first level is HPC nanoparticles were made from methacrylated or degradable cross-linker attached HPC. These nanoparticles could be stabilized at room temperature by residual methacrylate or degradable groups are present both with… more
Access: Restricted to UNT Community Members. Login required if off-campus.
Date: December 2005
Creator: Cai, Tong
Item Type: Refine your search to only Thesis or Dissertation
Back to Top of Screen