UNT Scholarly Works - 266 Matching Results

This system will be undergoing maintenance April 18th between 9:00AM and 12:00PM CDT.

Search Results

Results: 1 - 24 next
open access

3D-printed and injection molded polymer matrix composites with 2D layered materials

Description: This article reports on a study where 2D TMDs (MoS₂ and WS₂) and the 3D allotrope of carbon and graphite were incorporated into acrylonitrile butadiene styrene (ABS) and polyethylene terephthalate glycol (PETG) matrices in order to form polymer matrix composites (PMCs). The multipronged analysis described in this study was motivated by the purpose to fuse together topics of low-cost, additive manufacturing with 2D layered materials, and studying their ensuing mechanical and tribological propert… more
Date: June 26, 2020
Creator: Gamboa, Gerardo; Mazumder, Sangram; Hnatchuk, Nathalie; Catalan Gonzalez, Jorge Alfredo; Cortes, Damaris; Chen, Ikang et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Accessibility and Mechanical Stability of Nanoporous Zinc Oxide and Aluminum Oxide Coatings Synthesized via Infiltration of Polymer Templates

Description: Article describes how the conformal nanoporous inorganic coatings with accessible pores that are stable under applied thermal and mechanical stresses represent an important class of materials used in the design of sensors, optical coatings, and biomedical systems. Authors synthesize porous AlOx and ZnO coatings by the sequential infiltration synthesis (SIS) of two types of polymers that enable the design of porous conformal coatings.
Date: October 14, 2023
Creator: Omotosho, Khalil D.; Lyon, Zachary; Shevchenko, Elena V. & Berman, Diana
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Achieving extraordinary structural efficiency in a wrought magnesium rare earth alloy

Description: Article describes development of an ultrafine-grained magnesium alloy with an extraordinary strength and ductility combination, exceptional high specific strength, zero yield strength asymmetry and excellent high strain rate superplasticity.
Date: January 29, 2020
Creator: Panigrahi, S. K.; Mishra, Rajiv; Brennan, R.C. & Cho, K. C.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Adaptation of Fluctuating Magnetoacoustic System to External Signals

Description: Article studying the influence of microwave signals of different shapes on the magnetoacoustic wave system with a giant nonlinearity in canted antiferromagnet FeBO₃ at room temperature, which is close to its phase transition to the paramagnetic state. Results represent the first observation of the macroscopic quantum statistical phenomenon, Bose-Einstein condensation of magnetoacoustic wave quanta in a wave system with a high level of thermal fluctuations.
Date: June 2, 2021
Creator: Safonov, Vladimir L.; Bas, Derek A.; Berman, Diana; Rostovtsev, Yuri V.; Roberts, James A.; Mcconney, Michael E. et al.
Item Type: Refine your search to only Article
Partner: University of North Texas
open access

Additive friction stir deposition: a deformation processing route to metal additive manufacturing

Description: This article outlines key advantages of additive friction stir deposition, e.g. rendering fully-dense material in the as-printed state with fine, equiaxed microstructures, identifies its niche engineering uses, and points out future research needs in process physics and materials innovation.
Date: November 24, 2020
Creator: Yu, Hang Z. & Mishra, Rajiv
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Additive Manufacturing of Metals: A Brief Review of the Characteristic Microstructures and Properties of Steels, Ti-6al-4v and High-Entropy Alloys

Description: This article presents a brief review of the microstructures and mechanical properties of selected metallic alloys processed by additive manufacturing (AM).
Date: August 25, 2017
Creator: Gorsse, Stéphane; Hutchinson, Christopher; Gouné, Mohamed & Banerjee, Rajarshi
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Analyzing the Effectiveness of Microlubrication Using a Vegetable Oil-Based Metal Working Fluid during End Milling AISI 1018 Steel

Description: This article describes a study in which a vegetable oil-based lubricant was used to conduct wear analysis and to analyze the effectiveness of microlubrication during end milling AISI 1018 steel.
Date: April 15, 2014
Creator: Shaikh, Vasim; Boubekri, Nourredine & Scharf, Thomas W.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Bioactive glass coatings on metallic implants for biomedical applications

Description: Article provides a detailed overview of the benefits and issues of metal alloys when used as biomedical implants and how they are improved by bioactive glass-based coatings for biomedical applications.
Date: October 5, 2019
Creator: Oliver, Joy-anne N.; Su, Yingchao; Lu, Xiaonan; Kuo, Po Hsuen; Du, Jincheng & Zhu, Donghui
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Biocompatible, large-format, inkjet printed heterostructure molybdenum disulfide-graphene photodetectors on conformable substrates

Description: This article describes an inkjet printed, biocompatible, heterostructure photodetector that was constructed using inks of photo-active molybdenum disulfide (MoS2) and electrically conducting graphene which facilitated charge collection of the photocarriers. The importance of such devices stems from their potential utility in age-related-macular degeneration, which is a condition where the photosensitive retinal tissue degrades with aging, eventually compromising vision. The absence of effective… more
Date: September 7, 2017
Creator: Hossain, Ridwan F.; Deaguero, Isaac G.; Boland, Thomas & Kaul, Anupama
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Bioresorbable stent to manage congenital heart defects in children

Description: This article assembles large, pediatric-sized stents (Ø10 - Ø20 mm) from poly(L-lactide) fibers (DH-BDS) at two thicknesses, 250 µm and 300 µm. DH-BDS exhibiting hoop strength similar to metal stents and demonstrating minimal degradation and strength loss over the first year before completely disappearing within 3 to 4.5 years show promise as a pediatric interventional alternative to current strategies.
Date: March 19, 2021
Creator: Wright, Jamie; Nguyen, Annie; D'Souza, Nandika Anne, 1967-; Forbess, Joseph M.; Nugent, Alan; Reddy, Surenderanath R. Veeram et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Black Phosphorus-Molybdenum Disulfide Hetero-Junctions Formed with Ink-Jet Printing for Potential Solar Cell Applications with Indium-Tin-Oxide

Description: Article on the implementation of liquid exfoliation to inkjet-print two-dimensional (2D) black phosphorous (BP) and molybdenum disulfide (MoS₂) p–n heterojunctions on a standard indium tin oxide (ITO) glass substrate in a vertical architecture. The authors also compared the optical and electrical properties of the inkjet-printed BP layer with that of the MoS₂ and the electrical properties of the mechanically exfoliated MoS₂ with that of the inkjet-printed MoS₂.
Date: May 18, 2021
Creator: Mehta, Ravindra & Kaul, Anupama
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Boosting Piezoelectricity by 3D Printing PVDF-MoS2 Composite as a Conformal and High-Sensitivity Piezoelectric Sensor

Description: Article describes how additively manufactured flexible and high-performance piezoelectric devices are highly desirable for sensing and energy harvesting of 3D conformal structures. This study reports a significantly enhanced piezoelectricity in polyvinylidene fluoride (PVDF) achieved through the in situ dipole alignment of PVDF within PVDF-2D molybdenum disulfide composite by 3D printing.
Date: June 21, 2023
Creator: Islam, M.D, Nurul; Rupom, Rifat Hasan; Adhikari, Pashupati R.; Demchuk, Zoriana; Popov, Ivan; Sokolov, Alexei P. et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Can a simple topological-constraints-based model predict the initial dissolution rate of borosilicate and aluminosilicate glasses?

Description: This article, as an alternative route to empirical models, shows that a structural descriptor based on the number of topological constraints per atom can be used to predict the initial dissolution rate of aluminosilicate and borosilicate glasses after being parameterized on different families of glasses (specific series of borosilicate glasses). Results show that, provided that corrections are made for high alkali content glasses that dissolve incongruently (preferential release of Na), the mod… more
Date: March 16, 2020
Creator: Gin, Stéphane; Wang, Mengyi; Bisbrouck, Nicolas; Taron, Mélanie; Lu, Xiaonan; Deng, Lu et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Carbon Capture Utilization for Biopolymer Foam Manufacture: Thermal, Mechanical and Acoustic Performance of PCL/PHBV CO2 Foams

Description: This article uses PCL to blend into PBHV. Both unfoamed and foamed blends are examined. The results provide a pathway to multifunctional performance in foams of high performance biopolymers such as PBHV through harnessing the CO₂ miscibility of PCL.
Date: July 31, 2021
Creator: Oluwabunmi, Kayode E.; Zhao, Weihuan & D'Souza, Nandika Anne, 1967-
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
Back to Top of Screen