UNT Scholarly Works - 251 Matching Results

Search Results

Results: 1 - 24 next
open access

Rapid isothermal annealing of As-, P-, and B-implanted silicon

Description: This article discusses rapid idothermal annealing of As-, P-, and B-implanted silicon.
Date: June 15, 1984
Creator: Wilson, Scott R.; Paulson, W. M.; Gregory, R. B.; Hamdi, A. H. & McDaniel, Floyd Del. (Floyd Delbert), 1942-
Partner: UNT College of Arts and Sciences
open access

Thermal annealing behavior of an oxide layer under silicon

Description: This article discusses the thermal annealing behavior of an oxide layer under silicon.
Date: September 27, 1982
Creator: Hamdi, A. H.; McDaniel, Floyd Del. (Floyd Delbert), 1942-; Pinizzotto, Russell F.; Matteson, Samuel E.; Lam, H. W. & Malhi, S. D. S.
Partner: UNT College of Arts and Sciences
open access

Centimeter Scale Patterned Growth of Vertically Stacked Few Layer Only 2D MoS₂/WS₂ van der Waals Heterostructure

Description: This article reports the chemical vapor deposition (CVD) growth of large-area (>2 cm²) patterned 2D vdW heterostructures composed of few layer, vertically-stacked molybdenum disulfide and tungsten disulfide.
Date: May 5, 2016
Creator: Choudhary, Nitin; Park, Juhong; Hwang, Jun Yeon; Chung, Hee-Suk; Dumas, Kenneth H.; Khondaker, Saiful I. et al.
Partner: UNT College of Engineering
open access

Preparation and Characterization of Injectable Brushite Filled-Poly (Methyl Methacrylate) Bone Cement

Description: This article discusses the design of an alternative cement system that can better accommodate calcium-phosphate additives while preserving cement rheological properties and performance.
Date: September 19, 2014
Creator: Rodriguez, Lucas C.; Chari, Jonathan; Aghyarian, Shant; Gindri, Izabelle M.; Kosmopoulos, Victor & Rodrigues, Danieli C.
Partner: UNT College of Engineering
open access

Plasma Treated Multi-Walled Carbon Nanotubes (MWCNTs) for Epoxy Nanocomposites

Description: This article describes the depositing of plasma nanocoating of allylamine on the surfaces of multi-walled carbon nanotubes to provide desirable functionalities and thus to tailor the surface characteristics of multi-walled carbon nanotubes for improved dispersion and interfacial adhesion in epoxy matrices.
Date: December 19, 2011
Creator: Ritts, Andrew C.; Yu, Qingsong; Li, Hao; Lombardo, Stephen J.; Han, Xu; Xia, Zhenhai et al.
Partner: UNT College of Engineering
open access

Rationally designed graphene-nanotube 3D architectures with a seamless nodal junction for efficient energy conversion and storage

Description: This article discusses the development of a strategy of creating 3D graphene-carbon nanotube hollow fibers with radially aligned CNTs (RACNTs) seamless sheathed by a cylindrical graphene layer through a one-step chemical vapor deposition using an anodized aluminum wire template.
Date: September 4, 2015
Creator: Xue, Yuhua; Ding, Yong; Niu, Jianbing; Xia, Zhenhai; Roy, Ajit; Chen, Hao et al.
Partner: UNT College of Engineering
open access

Controlling the length scale and distribution of the ductile phase in metallic glass composites through friction stir processing

Description: This article demonstrates the refinement and uniform distribution of the crystalline dendritic phase by friction stir processing of titanium based in situ ductile-phase reinforced metallic glass composite.
Date: June 24, 2014
Creator: Singh Arora, Harpreet; Mridha, Sanghita; Singh Grewal, Harpeet; Singh, Harpreet; Hofmann, Douglas C. & Mukherjee, Sundeep
Partner: UNT College of Engineering
open access

Hybrid Boron Nitride-Natural Fiber Composites for Enhanced Thermal Conductivity

Description: This article finds that the synergy of natural fiber with hexagonal boron nitride (hBN) could significantly improve thermal conductivity, compared with that solely using hBN.
Date: October 5, 2016
Creator: Xia, Changlei; Garcia, Andres C.; Shi, Sheldon Q.; Qiu, Ying; Warner, Nathaniel; Wu, Yingji et al.
Partner: UNT College of Engineering
open access

Point-by-Point Compositional Analysis for Atom Probe Tomography

Description: This article demonstrates a new alternate approach to data processing for analyses that traditionally employed grid-based counting methods, as demonstrated using an atom-probe analysis of a Ni-based super-alloy.
Date: March 5, 2014
Creator: Stephenson, Leigh T.; Ceguerra, Anna V.; Li, Tong; Rojhirunsakool, Tanaporn; Nag, Soumya; Banerjee, Rajarshi et al.
Partner: UNT College of Engineering
open access

Oxidation behavior and microstructural decomposition of Ti-6Al-4V and Ti-6Al-4V-1B sheet

Description: This article conducts a direct comparison between the oxidation behavior of Ti-6Al-4V and Ti-6Al-4V + 1B to elucidate whether the addition of boron to Ti-^Al-4V impacts the oxidation behavior.
Date: August 1, 2016
Creator: Brice, David A.; Samimi, P.; Ghamarian, I.; Liu, Yue; Brice, R. M.; Reidy, Richard F. et al.
Partner: UNT College of Engineering
open access

Revisiting (Some of) the Lasting Impacts of the Liberty Ships via a Metallurgical Analysis of Rivets from the SS "John W. Brown"

Description: This article examines a rivet from the SS "John W. Brown", which was assembled in Baltimore, Maryland, and launched in September 1942. Classical metallurgical analysis of a rivet from the original 1942 vessel is compared with modern rivets used during its restoration.
Date: October 26, 2015
Creator: Harris, M. D.; Grogg, W. J.; Akoma, A.; Hayes, B. J.; Reidy, Richard F.; Imhoff, E. F. et al.
Partner: UNT College of Engineering
open access

Scanning Tunneling Microscopy Observation of Phonon Condensate

Description: This article discusses results showing that the effective radius of these phonon quasi-bound states, the real-space distribution of phonon standing wave amplitudes, the scattering phase shifts, and the nonlinear intermode coupling strongly depend on the presence of defect-induced scattering resonance.
Date: February 22, 2017
Creator: Altfeder, Igor; Voevodin, Andrey A.; Check, Michael H.; Eichfeld, Sarah M.; Robinson, Joshua A. & Balatsky, Alexander V.
Partner: UNT College of Engineering
open access

Discovery via Integration of Experimentation and Modeling: Three Examples for Titanium Alloys

Description: This article uses case studies to describe three examples of critical experiments that have been conducted in an integrated fashion with modeling activities for titanium alloys, providing valuable information in an accelerated manner.
Date: December 2, 2014
Creator: Liu, Yue; Samimi, P.; Ghamarian, I.; Brice, David A.; Huber, D. E.; Wang, Zhiqiang et al.
Partner: UNT College of Engineering
Back to Top of Screen