UNT Scholarly Works - 121 Matching Results

Search Results

prev Results: 21 - 44 next
open access

Cache-Aided General Linear Function Retrieval

Description: This article designs a novel coded caching scheme that outperforms uncoded caching schemes that either use unicast transmissions or let each user recover all files in the library. It extends the scope of the authors’ past work that only considered the class of linear functions that operate element-wise over the files.
Date: December 26, 2020
Creator: Wan, Kai; Sun, Hua; Ji, Mingyue; Tuninetti, Daniela & Caire, Giuseppe
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Carbon Nanomaterials for Optical Absorber Applications

Description: Article describing optical absorbers based on vertically aligned multi-walled carbon nanotubes (MWCNTs), synthesized using electric-field assisted growth that show an ultra-low reflectance, 100X lower compared to the benchmark, a diffuse metal black - Au-black - from wavelength λ ~ 350 nm – 2500 nm.
Date: December 28, 2011
Creator: Kaul, Anupama; Coles, James; Megerian, Krikor; Eastwood, Michael; Green, Robert; Pagano, Thomas et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Carrier photodynamics in 2D perovskites with solution-processed silver and graphene contacts for bendable optoelectronics

Description: Article reporting on the inkjet printed, direct contact study of solution-processed, 2D perovskite-based photodetectors (PDs) formed on flexible PI substrates. Silver (Ag) and graphene (Gr) inks have been engineered to serve as efficient electrical contacts for solution-processed two-dimensional (2D) organo-halide (CH3(CH2)3NH3)2(CH3NH3)n−1PbnI3n+1 (n = 4) layered perovskites, where all inkjet-printed heterostructure PDs were fabricated on polyimide (PI) substrates.
Date: March 25, 2021
Creator: Hossain, Ridwan F.; Min, Misook; Ma, Liang-Chieh; Sakri, Shambhavi R. & Kaul, Anupama
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Chemistry of Supraglacial Ponds in thte Debris-Covered Area of Lirung Glacier in Central Nepal Himalayas

Description: This article examines elevation trends and their control by seasonality, dominant geochemical processes, and season dynamics in these supraglacial ponds at elevations ranging between 3989 and 4292 m above sea level in the debris-covered area of Lirung glacier in central Nepal Himalayas, from November 2010 to October 2011 on a bimonthly basis.
Date: August 27, 2015
Creator: Bhatt, Maya P.; Takeuchi, Nozomu & Acevedo, Miguel F.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Complejo Hidroelectrico General Jose Antonio Paez: Sedimentos en el Embalse

Description: This report is on a study to quantify the production of sediment created by erosion in the upper basin of the Rio Santo Domingo dam site and determine the magnitude of the problem of sedimentation in the "Hydroelectric Complex General Jose Antonio Paez" reservoir.
Date: 1975
Creator: Yanes, Adolfo & Guevara, Juan M.
Item Type: Refine your search to only Report
Partner: UNT College of Engineering
open access

Cooperation of Autonomous NXT Robots Using Bluetooth Wireless Technology

Description: This report discusses research on cooperation of autonomous NXT robots using Bluetooth wireless technology. The research project consisted of using Bluetooth technology to coordinate movements between two agents. This research is part of Research Experiences for Teachers (RET) in Sensor Education, a National Science Foundation (NSF) funded grant project.
Date: 2013
Creator: Bell, Jesse; Freeman, Elizabeth; Namuduri, Kamesh & Costilla, Omar
Item Type: Refine your search to only Report
Partner: UNT College of Engineering
open access

A Cost-Effective Wireless Sensor Network System for Indoor Air Quality Monitoring Applications

Description: This paper from the 9th International Conference on Future Networks and Communications, FNC 2014 conference proceedings presents a low-cost indoor air quality monitoring wireless sensor network system developed using Arduino, XBee modules, and micro gas sensors.
Date: August 15, 2014
Creator: Abraham, Sherin & Li, Xinrong
Item Type: Refine your search to only Paper
Partner: UNT College of Engineering
open access

Cyber-Physical Systems Can Make Emergency Response Smart

Description: This paper from the Humanitarian Technology: Science, Systems and Global Impact 2015 conference proceedings discusses the Smart Emergency Response System prototype built in the context of the SmartAmerica Challenge 2013-2014 by a team of nine organizations led by MathWorks.
Date: July 7, 2015
Creator: Zander, Justyna; Mosterman, Pieter J.; Padir, Taskin; Wan, Yan & Fu, Shengli
Item Type: Refine your search to only Paper
Partner: UNT College of Engineering
open access

Demand Controlled Ventilation using CO₂ Sensors in a Wireless Sensor Network

Description: This report discusses research on demand controlled ventilation using CO₂ sensors in a wireless sensor network. The focus of this research project was to investigate Indoor Air Quality (IAQ) monitoring technologies, government regulations and policies, and best practices to improve IAQ. This research is part of Research Experiences for Teachers (RET) in Sensor Education, a National Science Foundation (NSF) funded grant project.
Date: 2013
Creator: Parsons, David; Jordan, Georgette; Li, Xinrong; Thompson, Ruthanne & Abraham, Sherin
Item Type: Refine your search to only Report
Partner: UNT College of Engineering

Demand Controlled Ventilation using CO2 Sensors in a Wireless Sensor Network [Poster]

Description: Poster presented as part of the 2013 Research Experiences for Teachers (RET) in Sensor Education, a National Science Foundation (NSF) funded grant project. This poster discusses research on demand controlled ventilation using CO₂ sensors in a wireless sensor network.
Date: 2013
Creator: Parsons, David; Jordan, Georgette; Li, Xinrong; Thompson, Ruthanne & Abraham, Sherin
Item Type: Refine your search to only Poster
Partner: UNT College of Engineering
open access

Dual-Wavelength Terahertz Metasurfaces with Independent Phase and Amplitude Control at Each Wavelength

Description: This article describes the design of a dual-wavelength achromatic metasurface-based deflector deflecting the incident wave to the same direction at two selected wavelengths, which has circumvented the critical limitation of strong wavelength dependence in the planar metasurface-based devices caused by the resonant nature of the plasmonic structures.
Date: September 23, 2016
Creator: Ding, Jun; Xu, Ningning; Ren, Han; Lin, Yuankun; Zhang, Weili & Zhang, Hualiang
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Eficiência de um sistema piloto de dessalinização de água salobra

Description: Article describes study which sought to evaluate the efficiency of pilot water desalination system treating brackish water which was obtained mixing fresh water and seawater up to reach 1,500 mg L-1 of total dissolved solids (TDS) concentration.
Date: March 16, 2020
Creator: Almeida, Juliano Penteado de; Kummer, Ana Carolina Barbosa; Carranza, Gabriel; Campos, Luiza Cintra; Széliga, Marcos Rogério; Acevedo, Miguel F. et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

EGFET-Based Sensors for Bioanalytical Applications: A Review

Description: This article provides a review of the state of the art focused on the development of biosensors and chemosensors based on extended-gate field-effect transistor within the field of bioanalytical applications.
Date: November 20, 2018
Creator: Pullano, Salvatore Andrea; Critello, Costantino Davide; Mahbub, Ifana; Tasneem, Nishat Tarannum; Shamsir, Samira; Islam, Syed Kamrul et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Electrode and electrolyte configurations for low frequency motion energy harvesting based on reverse electrowetting

Description: This article explores various combinations of electrolyte concentrations, dielectrics, and dielectric thicknesses to generate maximum output power employing REWOD energy harvester with the objective of implementing a fully self-powered wearable sensor.
Date: March 3, 2021
Creator: Adhikari, Pashupati R.; Tasneem, Nishat Tarannum; Reid, Russell C. & Mahbub, Ifana
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Embedded Corrosion Sensing with ZnO-PVDF Sensor Textiles

Description: Article investigating a non-conductive sensor textile as a viable solution for corrosion in underground and submerged steel pipes. The results offer a new option for sub-surface corrosion sensing using low cost, easily fabricated sensor textiles.
Date: May 28, 2020
Creator: Chowdhury, Tonoy; D'Souza, Nandika Anne, 1967-; Ho, Yee-Hsien; Dahotre, Narendra B. & Mahbub, Ifana
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Experimental Validation of Diffraction Lithography for Fabrication of Solid Microneedles

Description: Article states that microneedles are highly sought after for medicinal and cosmetic applications. However, the current manufacturing process for microneedles remains complicated, hindering its applicability to a broader variety of applications. This experimental study enables the shapes and mechanical properties of the microneedles to be predicted in advance for mass production and wide practical use for biomedical or cosmetic applications.
Date: December 14, 2022
Creator: Tan, Jun Ying; Li, Yuanki; Chamani, Faraz; Tharzeen, Aabila; Prakash, Punit; Natarajan, Balasubramaniam et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Fabrication and characterization of inkjet-printed 2D perovskite optoelectronic devices

Description: Article presents the large scale synthesis of solution-processed 2D (CH₃(CH₂)₃NH₃)₂(CH₃NH₃)ₙ − 1PbₙI₃ₙ + 1 (n = 2, 3, and 4) perovskites, a family of layered compounds with composition-tunable bandgap, where inkjet printing was used to fabricate heterostructure, flexible photodetector devices. The flexible, inkjet-printed perovskite 2D heterostructures have significant potential for optoelectronic devices, which can enable broad possibilities with compositional tunability and versatility of the… more
Date: August 24, 2020
Creator: Min, Misook; Hossain, Ridwan F.; Ma, Liang-Chieh & Kaul, Anupama
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Fabrication of wide-IF 200–300GHz superconductor–insulator–superconductor mixers with suspended metal beam leads formed on silicon-on-insulator

Description: This article reports on a fabrication process that uses silicon-oninsulator (SOI) substrates and micromachining techniques to form wide-IF superconductor–insulator–superconductor (SIS) mixer devices that have suspended metal beam leads for rf grounding. Aside from a description of the fabrication process, electrical measurements of these Nb/Al–AlNₓ /Nb trilayer devices will also be presented.
Date: October 7, 2004
Creator: Kaul, Anupama; Bumble, Bruce; Lee, Karen A.; LeDuc, Henry G.; Rice, Frank & Zmuidzinas, Jonas
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Feasibility Study of Microsecond Pulsed Microwave Ablation Using a Minimally Invasive Antenna

Description: Article establishing the feasibility of producing localized ablation zones using microsecond pulsed microwave ablation (MWA) as an alternative to conventional continuous wave (CW) MWA. Results open the opportunity for developing a coupled MWA treatment and imaging system using pulsed MWA and microwave-induced thermoacoustic signals for real-time monitoring of MWA.
Date: February 16, 2021
Creator: Evans, Audrey L.; Sawicki, James F.; Luyen, Hung; Mohtashami, Yahya; Behdad, Nader & Hagness, Susan C.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
Back to Top of Screen