UNT Scholarly Works - 857 Matching Results

Search Results

prev Results: 289 - 312 next
open access

Experimental Study of Back Wall Dross and Surface Roughness in Fiber Laser Microcutting of 316L Miniature Tubes

Description: This article uses extensive experimentation to evaluate the effect of fiber laser micro-cutting parameters over average surface roughness and back wall dross in AISI 316L stainless steel mixture tubes.
Date: December 26, 2017
Creator: García-López, Erika; Medrano-Tellez, Alexis G.; Ibarra-Medina, Juansethi R.; Siller Carrillo, Héctor Rafael & Rodríguez, Ciro A.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Experimental Validation of Diffraction Lithography for Fabrication of Solid Microneedles

Description: Article states that microneedles are highly sought after for medicinal and cosmetic applications. However, the current manufacturing process for microneedles remains complicated, hindering its applicability to a broader variety of applications. This experimental study enables the shapes and mechanical properties of the microneedles to be predicted in advance for mass production and wide practical use for biomedical or cosmetic applications.
Date: December 14, 2022
Creator: Tan, Jun Ying; Li, Yuanki; Chamani, Faraz; Tharzeen, Aabila; Prakash, Punit; Natarajan, Balasubramaniam et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Extended CT Void Analysis in FDM Additive Manufacturing Components

Description: This article provides an extended analysis of void shape by means of X-ray computed tomography (CT) applied to fused deposition modeling (FDM) samples. Furthermore, a relation between the tensile mechanical properties and digital void measurements is established. The results lead to the formulation of a novel criterion that predicts the mechanical behavior of AM components.
Date: August 30, 2020
Creator: Hernandez-Contreras, Adriana; Ruiz-Huerta, Leopoldo; Caballero-Ruiz, Alberto; Moock, Verena & Siller Carrillo, Héctor Rafael
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Fabric Defect Detection Using Activation Layer Embedded Convolutional Neural Network

Description: This article develops a deep-learning algorithm for an on-loom fabric defect inspection system by combining the techniques of image pre-processing, fabric motif determination, candidate defect map generation, and convolutional neural networks (CNNs).
Date: April 29, 2019
Creator: Ouyang, Wenbin; Xu, Bugao; Hou, Jue & Yuan, Xiaohui
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Fabrication and characterization of inkjet-printed 2D perovskite optoelectronic devices

Description: Article presents the large scale synthesis of solution-processed 2D (CH₃(CH₂)₃NH₃)₂(CH₃NH₃)ₙ − 1PbₙI₃ₙ + 1 (n = 2, 3, and 4) perovskites, a family of layered compounds with composition-tunable bandgap, where inkjet printing was used to fabricate heterostructure, flexible photodetector devices. The flexible, inkjet-printed perovskite 2D heterostructures have significant potential for optoelectronic devices, which can enable broad possibilities with compositional tunability and versatility of the… more
Date: August 24, 2020
Creator: Min, Misook; Hossain, Ridwan F.; Ma, Liang-Chieh & Kaul, Anupama
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Fabrication of densified wood via synergy of chemical pretreatment, hot-pressing and post mechanical fixation

Description: Article describes examination of the appearance, color, chemical composition, and physiology and mechanical properties of densified Abies wood before and after densification treatment using a colorimeter, FTIR and mechanical testing machine.
Date: January 30, 2020
Creator: Shi, Jiangtao; Peng, Junyi; Huang, Qiongtao; Cai, Liping & Shi, Sheldon
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Fabrication of wide-IF 200–300GHz superconductor–insulator–superconductor mixers with suspended metal beam leads formed on silicon-on-insulator

Description: This article reports on a fabrication process that uses silicon-oninsulator (SOI) substrates and micromachining techniques to form wide-IF superconductor–insulator–superconductor (SIS) mixer devices that have suspended metal beam leads for rf grounding. Aside from a description of the fabrication process, electrical measurements of these Nb/Al–AlNₓ /Nb trilayer devices will also be presented.
Date: October 7, 2004
Creator: Kaul, Anupama; Bumble, Bruce; Lee, Karen A.; LeDuc, Henry G.; Rice, Frank & Zmuidzinas, Jonas
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Facile, scalable synthesis of edge-halogenated graphene nanoplatelets as efficient metal-free eletrocatalysts for oxygen reduction reaction

Description: Article on facile, scalable synthesis of edge-halogenated graphene nanoplatelets as efficient metal-free electrocatalysts for oxygen reduction reaction.
Date: June 5, 2013
Creator: Jeon, In-Yup; Choi, Hyun-Jung; Choi, Min; Seo, Jeong-Min; Jung, Sun-Min; Kim, Min-Jung et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Failure analysis of an elbow tube fitting

Description: This article discusses elbow tube fitting. Abstract: Safe operation of machinery depends strongly on the design of the system and the employement of proper components and materials. Unique to fluid powered systems are the proper selection of hydraulic lines, fittings, and control valves. This paper describes the cause of fracture in an elbow tube fittings due to deficiencies in the dimensional design and materials selection. The investigation included metallography, fractography, hardness testi… more
Date: unknown
Creator: Mirshams, Reza A. & Sabbaghian, Mehdy
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

FALCON: Boosting Knowledge for Answer Engines

Description: This paper discusses FALCON, an answer engine that integrates different forms of syntactic, semantic and pragmatic knowledge for the goal of achieving better performance.
Date: November 2000
Creator: Harabagiu, Sanda M.; Moldovan, Dan I.; Paşca, Marius. 1974-; Mihalcea, Rada, 1974-; Surdeanu, Mihai; Bunescu, Răzvan et al.
Item Type: Refine your search to only Paper
Partner: UNT College of Engineering
open access

Feasibility of PROMIS using computerized adaptive testing during inpatient rehabilitation

Description: Article describes how there has been an increased significance on patient-reported outcomes in clinical settings. The authors aimed to evaluate the feasibility of administering patient-reported outcome measures by computerized adaptive testing (CAT) using a tablet computer with rehabilitation inpatients, assess workload demands on staff, and estimate the extent to which rehabilitation inpatients have elevated T-scores on six Patient Reported Outcomes Measurement Information System (PROMIS) meas… more
Date: May 10, 2023
Creator: Rafiq, Riyad Bin; Yount, Susan; Jerousek, Sara; Roth, Elliot J.; Cella, David; Albert, Mark et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Feasibility Study of Microsecond Pulsed Microwave Ablation Using a Minimally Invasive Antenna

Description: Article establishing the feasibility of producing localized ablation zones using microsecond pulsed microwave ablation (MWA) as an alternative to conventional continuous wave (CW) MWA. Results open the opportunity for developing a coupled MWA treatment and imaging system using pulsed MWA and microwave-induced thermoacoustic signals for real-time monitoring of MWA.
Date: February 16, 2021
Creator: Evans, Audrey L.; Sawicki, James F.; Luyen, Hung; Mohtashami, Yahya; Behdad, Nader & Hagness, Susan C.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Fiberboard Made from Scrap Denim: Characterization of its Properties by Effective Bulk Modulus Elastography

Description: Article describes how fiberboards from scrap denim were fabricated using two different resins, melamine urea formaldehyde (MUF) and polymeric methylene diphenyl diisocyanate (pMDI). Resin content and MUF-pMDI weight ratio were studied. Physical and mechanical tests determined the modulus of elasticity (MOE), modulus of rupture (MOR), internal bond (IB), thickness swell (TS), and water absorption (WA).
Date: March 20, 2023
Creator: Shi, Sheldon; Cui, Zhiying; Jin, Yuqi; Smith, Lee M.; Wu, H. Felix & Neogi, Arup
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
Back to Top of Screen