UNT Scholarly Works - 121 Matching Results

Search Results

prev Results: 31 - 54 next
open access

Habitat Quantity of Red-Cockaded Woodpecker Picoides Borealis (Aves: Piciformes: Picidae) in its Former Historic Landscape Near the Big Thicket Naitonal Preserve, Texas, USA

Description: This article quantifies pine-forested habitat suitable for Red-cockaded Woodpecker in the former historic range of the species to assess the potential for possible re-colonization.
Date: January 26, 2016
Creator: Thapa, Vivek & Acevedo, Miguel F.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

An Analysis of the Habitat of the Greater One-Horned Rhinoceros Rhinoceros Unicornis (Mammalia: Perissodactyla: Rhinocerotidae) at the Chitwan National Park, Nepal

Description: This article uses geographic information systems and landscape-level data obtained from remote sensing sources to build a habitat suitability index model for the Greater One-horned Rhinoceros.
Date: September 26, 2014
Creator: Thapa, Vivek; Acevedo, Miguel F. & Limbu, Kul P.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Scalable Fabrication of Natural-Fiber Reinforced Composites with Electromagnetic Interference Shielding Properties by Incorporating Powdered Activated Carbon

Description: This article discusses preparing Kenaf fiber-polyester composites incorporated with powdered activated carbon (PAC) using the vacuum-assisted resin transfer molding(VARTM) process.
Date: December 25, 2015
Creator: Xia, Changlei; Zhang, Shifeng; Ren, Han; Shi, Sheldon Q.; Zhang, Hualiang; Cai, Liping et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Taller de Trabajo Sobre Modelaje de Cultivos: Entrenamiento y Calibracion Informe

Description: Report on a Modeling Crop and Climate Change workshop. The objectives of the workshop were: 1) train Venezuelan scientists in the use of agricultural models IBSNAT program (International Benchmark Sites Network for Agrotechnology Transfer), including discussions about their applicability and the acquisition of knowledge about the data needed for proper simulation and validation, 2) Calibrate the model of maize (CERES) for different cultivars and different regions of Venezuela using data from so… more
Date: November 1989
Creator: Acevedo, Miguel F.; Andressen, Rigoberto; Azocar, Aura; Bisbal, Evelyn; Comerma, Juan; Corvo, Fernando et al.
Item Type: Refine your search to only Report
Partner: UNT College of Engineering
open access

Sc3N@C80 and La@C82 doped graphene for a new class of optoelectronic devices

Description: This is the Author Manuscript version of an article presenting high-performance hybrid graphene photodetectors prepared with endohedral fullerenes deposited on graphene using electrophoretic methods for the first time.
Date: December 19, 2019
Creator: Jayanand, Kishan; Min, Misook; Chugh, Srishti; Kaul, Anupama; Adhikari, Nirmal & Echegoyen, Luis
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Inkjet printing of liquid-exfoliated, highly conducting graphene/poly(3,4 ethylenedioxythiophene):poly(styrenesulfonate) nanosheets for organic electronics

Description: In this article, highly dispersive graphene inks are demonstrated by liquid-phase exfoliation of the bulk graphite crystal in the solvent N-methyl-2-pyrrolidone (NMP).
Date: May 4, 2017
Creator: Desai, Jay A.; Biswas, Chandan & Kaul, Anupama
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Investigation of structural morphology and electrical properties of graphene-C₆₀ hybrids

Description: This article reports on the electrophoretic deposition of C₆₀ on graphene. The results suggest that graphene based C₆₀ structures are attractive as flexible transparent electrodes and are excellent electron accepting/charge transport materials for the construction of efficient photovoltaic devices.
Date: May 2, 2017
Creator: Chugh, Srishti; Biswas, Chandan; Echegoyen, Luis & Kaul, Anupama
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Sol-gel synthesized indium tin oxide as a transparent conducting oxide with solution-processed black phosphorus for its integration into solar-cells

Description: This article describes the synthesis of indium tin oxide (ITO) thin films using solgel processing with a mixture of InCl₃, methanol, and SnCl₂, where the solutions were spin coated onto glass substrates. The combined architecture of black phosphorus on ITO thin films shows promise in its use for transparent electronics, which can also serve as a stepping stone for future solar cell platforms.
Date: October 9, 2020
Creator: Mehta, Ravindra; Min, Misook & Kaul, Anupama
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Fabrication of wide-IF 200–300GHz superconductor–insulator–superconductor mixers with suspended metal beam leads formed on silicon-on-insulator

Description: This article reports on a fabrication process that uses silicon-oninsulator (SOI) substrates and micromachining techniques to form wide-IF superconductor–insulator–superconductor (SIS) mixer devices that have suspended metal beam leads for rf grounding. Aside from a description of the fabrication process, electrical measurements of these Nb/Al–AlNₓ /Nb trilayer devices will also be presented.
Date: October 7, 2004
Creator: Kaul, Anupama; Bumble, Bruce; Lee, Karen A.; LeDuc, Henry G.; Rice, Frank & Zmuidzinas, Jonas
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Fabrication and characterization of inkjet-printed 2D perovskite optoelectronic devices

Description: Article presents the large scale synthesis of solution-processed 2D (CH₃(CH₂)₃NH₃)₂(CH₃NH₃)ₙ − 1PbₙI₃ₙ + 1 (n = 2, 3, and 4) perovskites, a family of layered compounds with composition-tunable bandgap, where inkjet printing was used to fabricate heterostructure, flexible photodetector devices. The flexible, inkjet-printed perovskite 2D heterostructures have significant potential for optoelectronic devices, which can enable broad possibilities with compositional tunability and versatility of the… more
Date: August 24, 2020
Creator: Min, Misook; Hossain, Ridwan F.; Ma, Liang-Chieh & Kaul, Anupama
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

3D-printed and injection molded polymer matrix composites with 2D layered materials

Description: This article reports on a study where 2D TMDs (MoS₂ and WS₂) and the 3D allotrope of carbon and graphite were incorporated into acrylonitrile butadiene styrene (ABS) and polyethylene terephthalate glycol (PETG) matrices in order to form polymer matrix composites (PMCs). The multipronged analysis described in this study was motivated by the purpose to fuse together topics of low-cost, additive manufacturing with 2D layered materials, and studying their ensuing mechanical and tribological propert… more
Date: June 26, 2020
Creator: Gamboa, Gerardo; Mazumder, Sangram; Hnatchuk, Nathalie; Catalan Gonzalez, Jorge Alfredo; Cortes, Damaris; Chen, Ikang et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

On Batch-Processing Based Coded Computing for Heterogeneous Distributed Computing Systems

Description: This article focuses on practical computing systems with heterogeneous computing resources, and designs a novel CDC approach, called batch-processing based coded computing (BPCC), which exploits the fact that every computing node can obtain some coded results before it completes the whole task. The scheme demonstrates promising performance in terms of high computational efficiency and robustness to uncertain disturbances.
Date: July 7, 2021
Creator: Wang, Baoqian; Xie, Junfei; Lu, Kejie; Wan, Yan & Fu, Shengli
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Multilevel Topological Interference Management: A TIM-TIN Perspective

Description: Article combining TIN with the topological interference management (TIM) framework that identifies optimal interference avoidance schemes and formulates a TIM-TIN problem for multilevel topological interference management, wherein only a coarse knowledge of channel strengths and no knowledge of channel phases is available to transmitters.
Date: August 5, 2021
Creator: Geng, Chunhua; Sun, Hua & Jafar, Syed A.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Feasibility Study of Microsecond Pulsed Microwave Ablation Using a Minimally Invasive Antenna

Description: Article establishing the feasibility of producing localized ablation zones using microsecond pulsed microwave ablation (MWA) as an alternative to conventional continuous wave (CW) MWA. Results open the opportunity for developing a coupled MWA treatment and imaging system using pulsed MWA and microwave-induced thermoacoustic signals for real-time monitoring of MWA.
Date: February 16, 2021
Creator: Evans, Audrey L.; Sawicki, James F.; Luyen, Hung; Mohtashami, Yahya; Behdad, Nader & Hagness, Susan C.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
Back to Top of Screen