UNT Scholarly Works - 61 Matching Results

Search Results

Results: 1 - 24 next
open access

Electrode and electrolyte configurations for low frequency motion energy harvesting based on reverse electrowetting

Description: This article explores various combinations of electrolyte concentrations, dielectrics, and dielectric thicknesses to generate maximum output power employing REWOD energy harvester with the objective of implementing a fully self-powered wearable sensor.
Date: March 3, 2021
Creator: Adhikari, Pashupati R.; Tasneem, Nishat Tarannum; Reid, Russell C. & Mahbub, Ifana
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Durable, High Conductivity, Superhydrophobicity Bamboo Timber Surface for Nanoimprint Stamps

Description: This article discusses the fabrication of superhydrophobic bamboo timber by magnetron sputtering and nanoimprint stamps. It was expected that this work could promote the applications of superhydrophobic and conductive bamboo products.
Date: December 6, 2017
Creator: Bao, Wenhui; Liang, Daxin; Zhang, Ming; Jiao, Yue; Wang, Lijuan; Cai, Liping et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Mechanical, Thermal, and Shape Memory Properties of Three-Dimensional Printing Biomass Composites

Description: This article studies studies the preparation of a series of heat-induced shape memory composites by the hot-melt extrusion and three-dimensional (3D) printing of thermoplastic polyurethane (TPU) using wood flour (WF) with different contents of EPDM-g-MAH.
Date: November 7, 2018
Creator: Bi, Hongjie; Xu, Min; Ye, Gaoyuan; Guo, Rui; Cai, Liping & Ren, Zechun
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Construction and characterization of superhydrophobic wood coatings using one-step technique

Description: Article describes how this study was aiming at enhancing the stain resistance and durability of varnish on wood surfaces, a super hydrophobic solution was created by blending the synthetic ZIF-8/paraffin with Hexadecyltrimethoxysilane at a specified mass ratio. This superhydrophobic mixture was then directly applied onto the wood varnish coating using a one-step method.
Date: November 22, 2023
Creator: Cao, Shuai; Cheng, Shuai; Wang, Pengyu; Ge, Shengbo; Cai, Liping & Cai, Jiabin
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Soybean Meal-Based Wood Adhesive Enhanced by Phenol Hydroxymethylated Tannin Oligomer for Exterior Use

Description: This article highlights a study of a bio adhesive was developed from soybean meal and larch tannin that was designed for exterior use. Phenol hydroxymethylated tannin oligomer (PHTO) was synthesized and then mixed with soybean meal flour in order to obtain a soybean meal-based adhesive (SPA). The results showed that the moisture absorption rate, residual rate, and solid content of SPA with 10 wt % PHTO (mass ratio with respect to the entire adhesive) were improved by 22.8%, 11.6%, and 6.8%, res… more
Date: March 31, 2020
Creator: Chen, Mingsong; Zhang, Yi; Li, Yue; Shi, Sheldon; Li, Jianzhang; Gao, Qiang et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Modeling analysis of the impact of anthropogenic emission sources on ozone concentration over selected urban areas in Texas

Description: This article discusses a regional photochemical modeling experiment set up to simulate a high ozone episode of September 11-14, 2002 to evaluate the impact of various anthropogenic emissions sources on ozone concentrations.
Date: January 6, 2016
Creator: Farooqui, Zuber M.; John, Kuruvilla; Biswas, Jhumoor & Sule, Neelesh
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Electrical and Thermal Conductivity of Polylactic Acid (PLA)-Based Biocomposites by Incorporation of Nano-Graphite Fabricated with Fused Deposition Modeling

Description: This article aims to improve the electrical and thermal conductivity of the polylactic acid/wood flour/ thermoplastic polyurethane composites by Fused Deposition Modeling (FDM).
Date: unknown
Creator: Guo, Rui; Ren, Zechun; Bi, Hongjie; Xu, Min & Cai, Liping
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Electrical and Thermal Conductivity of Polylactic Acid (PLA)-Based Biocomposites by Incorporation of Nano-Graphite Fabricated with Fused Deposition Modeling

Description: This article describes a study to improve the electrical and thermal conductivity of the polylactic acid/wood flour/thermoplastic polyurethane composites by Fused Deposition Modeling (FDM). The results showed that, when the addition amount of nano-graphite reached 25 pbw, the volume resistivity of the composites decreased to 10⁸ Ω·m, which was a significant reduction, indicating that the conductive network was already formed. It also had good thermal conductivity, mechanical properties, and the… more
Date: March 22, 2019
Creator: Guo, Rui; Ren, Zechun; Bi, Hongjie; Xu, Min & Cai, Liping
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Preparation and Characterization of 3D Printed PLA-Based Conductive Composites Using Carbonaceous Fillers by Masterbatch Melting Method

Description: This article highlights a study aimed at improving the conductivity of polylactic acid (PLA)-based composites by incorporating carbonaceous fillers. The composites with the addition of graphene nanoplatelets (rGO) or multi-walled carbon nanotubes (MWCNTs) were fabricated by the masterbatch melting method in order to improve the dispersion of the two kinds of nano-fillers. The results showed that, with the addition of 9 wt % rGO, the volume electrical resistivity of the composite reached the min… more
Date: September 29, 2019
Creator: Guo, Rui; Ren, Zechun; Jia, Xin; Bi, Hongjie; Yang, Haiying; Ji, Tong et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Effect of surfactants on pressure-sensitivity of carbon nanotube filled cement mortar composites

Description: In this article, the pressure-sensitivity of CNT filled cement mortar composites with different concentrations of MWNT and different surfactants is investigated under repeated loading and impulsive loading, respectively. Experimental results indicate that the response of the electrical resistance of composites with NaDDBS to external force is more stable and sensitive than that of composites with SDS. Therefore, NaDDBS has higher efficiency than SDS for the dispersion of MWNT in cement mortar, … more
Date: November 6, 2014
Creator: Han, Baoguo & Yu, Xun
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Molecular characteristics and function of elliptical Kiwifruit

Description: Article describes study analyzing the chemical components of elliptical kiwifruit (Actinidia chinensis Planch) using Fourier transform infrared spectroscopy (FT-IR) and gas chromatography mass spectrometry (GC–MS) technologies.
Date: January 28, 2020
Creator: Hu, Zhe; Ge, Shengbo; Yang, Jun; Li, Yiyang; Bi, Huitao; Zheng, Dongfang et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Three-Dimensional Carbon Nanostructures for Advanced Lithium-Ion Batteries

Description: This review contains the authors' recent progress on the design and fabrication of 3D carbon nanostructures, their performance in Li-ion batteries (LIBs), and their implementation into large-scale, lightweight, and flexible LIBs.
Date: October 26, 2016
Creator: Kang, Chiwon; Cha, Eunho; Patel, Mumukshu D.; Wu, H. Felix & Choi, Wonbong
Item Type: Refine your search to only Review
Partner: UNT College of Engineering
open access

Sources Affecting PM₂̣ ₅ Concentrations at a Rural Semi-Arid Coastal Site in South Texas

Description: This article employs an advanced factor analysis technique with principal component analysis/absolute principal component scores and positive matrix factorization to apportion the sources influencing the PM₂̣ ₅ levels measured during 2003 through 2005 at a rural coastal site located within the Corpus Christi urban airshed in South Texas.
Date: November 22, 2012
Creator: Karnae, Saritha & John, Kuruvilla
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
Back to Top of Screen