Search Results

open access

Advancing Reverse Electrowetting-on-Dielectric from Planar to Rough Surface Electrodes for High Power Density Energy Harvesting

Description: Article presenting electrical and multiphysics-based modeling approaches of REWOD energy harvester using structured rough surface electrodes. By enhancing the overall available surface area, an increase in the overall capacitance is achieved.
Date: December 15, 2021
Creator: Adhikari, Pashupati R.; Patwary, Adnan B.; Kakaraparty, Karthik; Gunti, Avinash; Reid, Russell C. & Mahbub, Ifana
Partner: UNT College of Engineering
open access

Embedded Corrosion Sensing with ZnO-PVDF Sensor Textiles

Description: Article investigating a non-conductive sensor textile as a viable solution for corrosion in underground and submerged steel pipes. The results offer a new option for sub-surface corrosion sensing using low cost, easily fabricated sensor textiles.
Date: May 28, 2020
Creator: Chowdhury, Tonoy; D'Souza, Nandika Anne, 1967-; Ho, Yee-Hsien; Dahotre, Narendra B. & Mahbub, Ifana
Partner: UNT College of Engineering
open access

Sc3N@C80 and La@C82 doped graphene for a new class of optoelectronic devices

Description: This is the Author Manuscript version of an article presenting high-performance hybrid graphene photodetectors prepared with endohedral fullerenes deposited on graphene using electrophoretic methods for the first time.
Date: December 19, 2019
Creator: Jayanand, Kishan; Min, Misook; Chugh, Srishti; Kaul, Anupama; Adhikari, Nirmal & Echegoyen, Luis
Partner: UNT College of Engineering
open access

Methylammonium Lead Tri-Iodide Perovskite Solar Cells with Varying Equimolar Concentrations of Perovskite Precursors

Description: Article conducting a systematic study to tune the equimolar precursor ratio of the organic halide (methylammonium iodide; MAI) and metal halide (lead iodide; PbI2) in a fixed solvent mixture of N,N-dimethylformamide (DMF):dimethylsulfoxide (DMSO).
Date: December 9, 2021
Creator: Parashar, Mritunjaya & Kaul, Anupama
Partner: UNT College of Engineering

Spectroscopic, structural, and strain-dependent analysis of suspended bulk WSe2 sheets

Description: Article utilizing Raman spectroscopy and photoluminescence (PL) spectroscopy to analyze the phononic and electronic parameters in suspended bulk WSe₂ sheets, fabricated utilizing photolithography and wet chemical etching. The findings of this work will be beneficial in analyzing thermal, optical, and mechanical properties of WSe₂ in a suspended platform for its application in electronic, thermoelectric, and mechanical sensors in the future.
Date: February 8, 2022
Creator: Bandyopadhyay, Avra S. & Kaul, Anupama
Partner: UNT College of Engineering
open access

Multilevel Topological Interference Management: A TIM-TIN Perspective

Description: Article combining TIN with the topological interference management (TIM) framework that identifies optimal interference avoidance schemes and formulates a TIM-TIN problem for multilevel topological interference management, wherein only a coarse knowledge of channel strengths and no knowledge of channel phases is available to transmitters.
Date: August 5, 2021
Creator: Geng, Chunhua; Sun, Hua & Jafar, Syed A.
Partner: UNT College of Engineering
open access

On Batch-Processing Based Coded Computing for Heterogeneous Distributed Computing Systems

Description: This article focuses on practical computing systems with heterogeneous computing resources, and designs a novel CDC approach, called batch-processing based coded computing (BPCC), which exploits the fact that every computing node can obtain some coded results before it completes the whole task. The scheme demonstrates promising performance in terms of high computational efficiency and robustness to uncertain disturbances.
Date: July 7, 2021
Creator: Wang, Baoqian; Xie, Junfei; Lu, Kejie; Wan, Yan & Fu, Shengli
Partner: UNT College of Engineering
open access

Feasibility Study of Microsecond Pulsed Microwave Ablation Using a Minimally Invasive Antenna

Description: Article establishing the feasibility of producing localized ablation zones using microsecond pulsed microwave ablation (MWA) as an alternative to conventional continuous wave (CW) MWA. Results open the opportunity for developing a coupled MWA treatment and imaging system using pulsed MWA and microwave-induced thermoacoustic signals for real-time monitoring of MWA.
Date: February 16, 2021
Creator: Evans, Audrey L.; Sawicki, James F.; Luyen, Hung; Mohtashami, Yahya; Behdad, Nader & Hagness, Susan C.
Partner: UNT College of Engineering
open access

Cache-Aided General Linear Function Retrieval

Description: This article designs a novel coded caching scheme that outperforms uncoded caching schemes that either use unicast transmissions or let each user recover all files in the library. It extends the scope of the authors’ past work that only considered the class of linear functions that operate element-wise over the files.
Date: December 26, 2020
Creator: Wan, Kai; Sun, Hua; Ji, Mingyue; Tuninetti, Daniela & Caire, Giuseppe
Partner: UNT College of Engineering
open access

Electrode and electrolyte configurations for low frequency motion energy harvesting based on reverse electrowetting

Description: This article explores various combinations of electrolyte concentrations, dielectrics, and dielectric thicknesses to generate maximum output power employing REWOD energy harvester with the objective of implementing a fully self-powered wearable sensor.
Date: March 3, 2021
Creator: Adhikari, Pashupati R.; Tasneem, Nishat Tarannum; Reid, Russell C. & Mahbub, Ifana
Partner: UNT College of Engineering
open access

Synchronization of multiple coupled rf-SQUID flux qubits

Description: Article demonstrating a practical strategy for synchronizing the properties of compound Josephson junction (CJJ) radio frequency monitored superconducting quantum interference device (rf-SQUID) qubits on a multi-qubit chip.
Date: December 21, 2009
Creator: Harris, R.; Brito, F.; Berkley, A. J.; Johansson, J.; Johnson, M. W.; Lanting, T. et al.
Partner: UNT College of Engineering
open access

Sol-gel synthesized indium tin oxide as a transparent conducting oxide with solution-processed black phosphorus for its integration into solar-cells

Description: This article describes the synthesis of indium tin oxide (ITO) thin films using solgel processing with a mixture of InCl₃, methanol, and SnCl₂, where the solutions were spin coated onto glass substrates. The combined architecture of black phosphorus on ITO thin films shows promise in its use for transparent electronics, which can also serve as a stepping stone for future solar cell platforms.
Date: October 9, 2020
Creator: Mehta, Ravindra; Min, Misook & Kaul, Anupama
Partner: UNT College of Engineering
open access

Probing Noise in Flux Qubits via Macroscopic Resonant Tunneling

Description: Article on the characterization of noise in a flux qubit using macroscopic resonant tunneling between the two lowest lying states of a bistable rf SQUID. Analysis of these results indicates that the dominant source of low energy flux noise in this device is a quantum mechanical environment in thermal equilibrium.
Date: September 10, 2008
Creator: Harris, R.; Johnson, M. W.; Han, S.; Berkley, A. J.; Johansson, J.; Bunyk, P. et al.
Partner: UNT College of Engineering
open access

Light–matter interactions in two-dimensional layered tungsten diselenide for gauging evolution of phonon dynamics

Description: Article exploring phonon dynamics in mechanically exfoliated two-dimensional WSe₂ using temperature-dependent and laser-power-dependent Raman and photoluminescence (PL) spectroscopy. The work reported sheds fundamental insights into the evolution of phonon dynamics in WSe₂ and should help pave the way for designing high-performance electronic, optoelectronic and thermoelectric devices in the future.
Date: May 12, 2020
Creator: Bandyopadhyay, Avra S.; Biswas, Chandan & Kaul, Anupama
Partner: UNT College of Engineering
open access

Investigation of structural morphology and electrical properties of graphene-C₆₀ hybrids

Description: This article reports on the electrophoretic deposition of C₆₀ on graphene. The results suggest that graphene based C₆₀ structures are attractive as flexible transparent electrodes and are excellent electron accepting/charge transport materials for the construction of efficient photovoltaic devices.
Date: May 2, 2017
Creator: Chugh, Srishti; Biswas, Chandan; Echegoyen, Luis & Kaul, Anupama
Partner: UNT College of Engineering
open access

Interrogating vertically oriented carbon nanofibers with nanomanipulation for nanoelectromechanical switching applications

Description: Article demonstrates electrostatic switching in vertically oriented carbon nanofibers synthesized on refractory metallic nitride substrates, where pull-in voltages Vpi ranged from 10 to 40 V. A finite element model was also developed to determine a theoretical Vpi and results were compared to experiment.
Date: August 31, 2009
Creator: Kaul, Anupama; Khan, Abdur R.; Bagge, Leif; Megerian, Krikor G.; LeDuc, Henry G. & Epp, Larry
Partner: UNT College of Engineering
open access

Internally shunted sputtered niobium nitride Josephson junctions with a TaNx barrier for nonlatching logic applications

Description: This article reports on the growth, fabrication, and device characterization of NbN internally shunted Josephson junctions with a TaNx barrier.
Date: December 28, 2000
Creator: Kaul, Anupama; Whiteley, Stephen R.; Van Duzer, Theodore; Yu, Lei; Newman, Nathan & Rowell, John M.
Partner: UNT College of Engineering
open access

Inkjet printing of liquid-exfoliated, highly conducting graphene/poly(3,4 ethylenedioxythiophene):poly(styrenesulfonate) nanosheets for organic electronics

Description: In this article, highly dispersive graphene inks are demonstrated by liquid-phase exfoliation of the bulk graphite crystal in the solvent N-methyl-2-pyrrolidone (NMP).
Date: May 4, 2017
Creator: Desai, Jay A.; Biswas, Chandan & Kaul, Anupama
Partner: UNT College of Engineering
open access

Fabrication of wide-IF 200–300GHz superconductor–insulator–superconductor mixers with suspended metal beam leads formed on silicon-on-insulator

Description: This article reports on a fabrication process that uses silicon-oninsulator (SOI) substrates and micromachining techniques to form wide-IF superconductor–insulator–superconductor (SIS) mixer devices that have suspended metal beam leads for rf grounding. Aside from a description of the fabrication process, electrical measurements of these Nb/Al–AlNₓ /Nb trilayer devices will also be presented.
Date: October 7, 2004
Creator: Kaul, Anupama; Bumble, Bruce; Lee, Karen A.; LeDuc, Henry G.; Rice, Frank & Zmuidzinas, Jonas
Partner: UNT College of Engineering
open access

Fabrication and characterization of inkjet-printed 2D perovskite optoelectronic devices

Description: Article presents the large scale synthesis of solution-processed 2D (CH₃(CH₂)₃NH₃)₂(CH₃NH₃)ₙ − 1PbₙI₃ₙ + 1 (n = 2, 3, and 4) perovskites, a family of layered compounds with composition-tunable bandgap, where inkjet printing was used to fabricate heterostructure, flexible photodetector devices. The flexible, inkjet-printed perovskite 2D heterostructures have significant potential for optoelectronic devices, which can enable broad possibilities with compositional tunability and versatility of the… more
Date: August 24, 2020
Creator: Min, Misook; Hossain, Ridwan F.; Ma, Liang-Chieh & Kaul, Anupama
Partner: UNT College of Engineering
Back to Top of Screen