UNT Scholarly Works - 233 Matching Results

Search Results

Results: 1 - 24 next
open access

Facile, scalable synthesis of edge-halogenated graphene nanoplatelets as efficient metal-free eletrocatalysts for oxygen reduction reaction

Description: Article on facile, scalable synthesis of edge-halogenated graphene nanoplatelets as efficient metal-free electrocatalysts for oxygen reduction reaction.
Date: June 5, 2013
Creator: Jeon, In-Yup; Choi, Hyun-Jung; Choi, Min; Seo, Jeong-Min; Jung, Sun-Min; Kim, Min-Jung et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Centimeter Scale Patterned Growth of Vertically Stacked Few Layer Only 2D MoS₂/WS₂ van der Waals Heterostructure

Description: This article reports the chemical vapor deposition (CVD) growth of large-area (>2 cm²) patterned 2D vdW heterostructures composed of few layer, vertically-stacked molybdenum disulfide and tungsten disulfide.
Date: May 5, 2016
Creator: Choudhary, Nitin; Park, Juhong; Hwang, Jun Yeon; Chung, Hee-Suk; Dumas, Kenneth H.; Khondaker, Saiful I. et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Preparation and Characterization of Injectable Brushite Filled-Poly (Methyl Methacrylate) Bone Cement

Description: This article discusses the design of an alternative cement system that can better accommodate calcium-phosphate additives while preserving cement rheological properties and performance.
Date: September 19, 2014
Creator: Rodriguez, Lucas C.; Chari, Jonathan; Aghyarian, Shant; Gindri, Izabelle M.; Kosmopoulos, Victor & Rodrigues, Danieli C.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Plasma Treated Multi-Walled Carbon Nanotubes (MWCNTs) for Epoxy Nanocomposites

Description: This article describes the depositing of plasma nanocoating of allylamine on the surfaces of multi-walled carbon nanotubes to provide desirable functionalities and thus to tailor the surface characteristics of multi-walled carbon nanotubes for improved dispersion and interfacial adhesion in epoxy matrices.
Date: December 19, 2011
Creator: Ritts, Andrew C.; Yu, Qingsong; Li, Hao; Lombardo, Stephen J.; Han, Xu; Xia, Zhenhai et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Rationally designed graphene-nanotube 3D architectures with a seamless nodal junction for efficient energy conversion and storage

Description: This article discusses the development of a strategy of creating 3D graphene-carbon nanotube hollow fibers with radially aligned CNTs (RACNTs) seamless sheathed by a cylindrical graphene layer through a one-step chemical vapor deposition using an anodized aluminum wire template.
Date: September 4, 2015
Creator: Xue, Yuhua; Ding, Yong; Niu, Jianbing; Xia, Zhenhai; Roy, Ajit; Chen, Hao et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Controlling the length scale and distribution of the ductile phase in metallic glass composites through friction stir processing

Description: This article demonstrates the refinement and uniform distribution of the crystalline dendritic phase by friction stir processing of titanium based in situ ductile-phase reinforced metallic glass composite.
Date: June 24, 2014
Creator: Singh Arora, Harpreet; Mridha, Sanghita; Singh Grewal, Harpeet; Singh, Harpreet; Hofmann, Douglas C. & Mukherjee, Sundeep
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Three-Dimensional Carbon Nanostructures for Advanced Lithium-Ion Batteries

Description: This review contains the authors' recent progress on the design and fabrication of 3D carbon nanostructures, their performance in Li-ion batteries (LIBs), and their implementation into large-scale, lightweight, and flexible LIBs.
Date: October 26, 2016
Creator: Kang, Chiwon; Cha, Eunho; Patel, Mumukshu D.; Wu, H. Felix & Choi, Wonbong
Item Type: Refine your search to only Review
Partner: UNT College of Engineering
open access

Point-by-Point Compositional Analysis for Atom Probe Tomography

Description: This article demonstrates a new alternate approach to data processing for analyses that traditionally employed grid-based counting methods, as demonstrated using an atom-probe analysis of a Ni-based super-alloy.
Date: March 5, 2014
Creator: Stephenson, Leigh T.; Ceguerra, Anna V.; Li, Tong; Rojhirunsakool, Tanaporn; Nag, Soumya; Banerjee, Rajarshi et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Oxidation behavior and microstructural decomposition of Ti-6Al-4V and Ti-6Al-4V-1B sheet

Description: This article conducts a direct comparison between the oxidation behavior of Ti-6Al-4V and Ti-6Al-4V + 1B to elucidate whether the addition of boron to Ti-^Al-4V impacts the oxidation behavior.
Date: August 1, 2016
Creator: Brice, David A.; Samimi, P.; Ghamarian, I.; Liu, Yue; Brice, R. M.; Reidy, Richard F. et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Uv-Induced Modification of Fused Silica: Insights From ReaxFF-Based Molecular Dynamics Simulations

Description: This article discusses molecular dynamics simulations performed to present evidence that silica structure in both short and medium ranges is directly modified by UV-induced defects.
Date: September 16, 2016
Creator: Tian, Ye; Du, Jincheng; Zu, Xiaotao; Han, Wei; Yuan, Xiaodong & Zheng, Wanguo
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Interfacial Structures and Energetics of the Strengthening Precipitate Phase in Creep-Resistant Mg-Nd-Based Alloys

Description: This article discusses the study of two interfaces– {112}β1/{1100}Mg and {111}β1/{1120}Mg– that are commensurate with β1/hcp-Mg orientation relationship via first principles calculations.
Date: January 17, 2017
Creator: Choudhuri, Deep; Banerjee, Rajarshi & Srivilliputhur, Srinivasan
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Revisiting (Some of) the Lasting Impacts of the Liberty Ships via a Metallurgical Analysis of Rivets from the SS "John W. Brown"

Description: This article examines a rivet from the SS "John W. Brown", which was assembled in Baltimore, Maryland, and launched in September 1942. Classical metallurgical analysis of a rivet from the original 1942 vessel is compared with modern rivets used during its restoration.
Date: October 26, 2015
Creator: Harris, M. D.; Grogg, W. J.; Akoma, A.; Hayes, B. J.; Reidy, Richard F.; Imhoff, E. F. et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Scanning Tunneling Microscopy Observation of Phonon Condensate

Description: This article discusses results showing that the effective radius of these phonon quasi-bound states, the real-space distribution of phonon standing wave amplitudes, the scattering phase shifts, and the nonlinear intermode coupling strongly depend on the presence of defect-induced scattering resonance.
Date: February 22, 2017
Creator: Altfeder, Igor; Voevodin, Andrey A.; Check, Michael H.; Eichfeld, Sarah M.; Robinson, Joshua A. & Balatsky, Alexander V.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
Back to Top of Screen