UNT Scholarly Works - 356 Matching Results

Search Results

prev Results: 71 - 94 next
open access

Centimeter Scale Patterned Growth of Vertically Stacked Few Layer Only 2D MoSā‚‚/WSā‚‚ van der Waals Heterostructure

Description: This article reports the chemical vapor deposition (CVD) growth of large-area (>2 cmĀ²) patterned 2D vdW heterostructures composed of few layer, vertically-stacked molybdenum disulfide and tungsten disulfide.
Date: May 5, 2016
Creator: Choudhary, Nitin; Park, Juhong; Hwang, Jun Yeon; Chung, Hee-Suk; Dumas, Kenneth H.; Khondaker, Saiful I. et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Interfacial Structures and Energetics of the Strengthening Precipitate Phase in Creep-Resistant Mg-Nd-Based Alloys

Description: This article discusses the study of two interfacesā€“ {112}Ī²1/{1100}Mg and {111}Ī²1/{1120}Mgā€“ that are commensurate with Ī²1/hcp-Mg orientation relationship via first principles calculations.
Date: January 17, 2017
Creator: Choudhuri, Deep; Banerjee, Rajarshi & Srivilliputhur, Srinivasan
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Crystallographically degenerate B2 precipitation in a plastically deformed fcc-based complex concentrated alloy

Description: Article describes the development of bcc-ordered B2 and fcc phases manifested in three different orientation relationships (ORs) in the same microstructure: Kurdjumovā€“Sachs, Nishiyamaā€“Wasserman and Pitsch.
Date: January 22, 2018
Creator: Choudhuri, Deep; Shukla, Shivakant; Green, Whitley; Gwalani, Bharat; Ageh, Victor; Banerjee, Rajarshi et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Deformation induced intermediate metastable lattice structures facilitate ordered B2 nucleation in a fcc-based high entropy alloy

Description: This article reports a novel mixed-mode coupled displacive-diffusional transformation resulting in homogeneously distributed intra-granular B2 precipitates within the fcc matrix.
Date: December 5, 2018
Creator: Choudhuri, Deep; Shukla, Shivakant; Gwalani, Bharat; Banerjee, Rajarshi & Mishra, R. S.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Exceptional increase in the creep life of magnesium rare-earth alloys due to localized bond stiffening

Description: Article describes study in which researchers attribute the 600% increase in creep life in a prototypical Mgā€“rare earth (RE)ā€“Zn alloy to multiple mechanisms caused by REā€“Zn bondingā€”stabilization of a large volume fraction of strengthening precipitates on slip planes, increase in vacancy diffusion barrier, reduction in activated cross-slip, and enhancement of covalent character and bond strength around Zn solutes along the c-axis of Mg using atomic-scale characterization and first principles calcā€¦ more
Date: December 8, 2017
Creator: Choudhuri, Deep; Srivilliputhur, Srinivasan; Gibson, Mark A.; Zheng, Yufeng; Jaeger, David L.; Fraser, Hamish L. et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Investigation of structural morphology and electrical properties of graphene-Cā‚†ā‚€ hybrids

Description: This article reports on the electrophoretic deposition of Cā‚†ā‚€ on graphene. The results suggest that graphene based Cā‚†ā‚€ structures are attractive as flexible transparent electrodes and are excellent electron accepting/charge transport materials for the construction of efficient photovoltaic devices.
Date: May 2, 2017
Creator: Chugh, Srishti; Biswas, Chandan; Echegoyen, Luis & Kaul, Anupama
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Polymeric Materials Reinforced with Multiwall Carbon Nanotubes: A Constitutive Material Model

Description: This article discusses the modification of an existing material model to take into account softening and residual strain effects observed in polymeric materials reinforced with carbon nanotubes when subjected to loading and unloading cycles.
Date: July 16, 2013
Creator: CĆ³rdova, RenĆ© K.; ElĆ­as-ZĆŗƱiga, Alex; Elizalde, Luis E.; Siller Carrillo, HĆ©ctor Rafael; SĆ”nchez, JosĆ© Antonio; RodrĆ­guez, Ciro A. et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Fundamentals of three-dimensional Yb-fiber Nd:YAG laser machining of structural bone

Description: This article presents a study that aims to understand the fundamental aspects of the laser-bone interaction in three-dimensional laser machining of the bone through an integrated experimental-computational approach.
Date: September 23, 2019
Creator: Dahotre, Narendra B.; Pantawane, Mangesh V.; Robertson, William B.; Khan, Riaz J. K. & Fick, Daniel P.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

3D Atom Probe Tomography Study on Segregation of Yttrium in Modified Aluminum-Silicon Alloys

Description: In this article, yttrium segregation behavior in Al-Si alloys has been studied using the three-dimensional atom probe tomography technique. Al-Si alloys were prepared by casting method, and yttrium was added to modify the eutectic silicon morphology in these alloys. The results indicated that yttrium is preferentially located within the Si phase, with the highest concentration at the interface between eutectic Al and eutectic Si.
Date: May 15, 2018
Creator: De-Giovanni, Mario; Alam, Talukder; Banerjee, Rajarshi & Srirangam, Prakash
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Chemical exfoliation efficacy of semiconducting WS2 and its use in an additively manufactured heterostructure grapheneā€“WS2ā€“graphene photodiode

Description: Article describes an experiment where various chemical exfoliation routes for semiconducting two-dimensional (2D) layered material WS2 were explored, including magnetic stirring (MS), shear mixing (SM), and horn-tip (HT) sonication.
Date: August 6, 2019
Creator: Desai, Jay A.; Adhikari, Nirmal & Kaul, Anupama
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Inkjet printing of liquid-exfoliated, highly conducting graphene/poly(3,4 ethylenedioxythiophene):poly(styrenesulfonate) nanosheets for organic electronics

Description: In this article, highly dispersive graphene inks are demonstrated by liquid-phase exfoliation of the bulk graphite crystal in the solvent N-methyl-2-pyrrolidone (NMP).
Date: May 4, 2017
Creator: Desai, Jay A.; Biswas, Chandan & Kaul, Anupama
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Dual-Wavelength Terahertz Metasurfaces with Independent Phase and Amplitude Control at Each Wavelength

Description: This article describes the design of a dual-wavelength achromatic metasurface-based deflector deflecting the incident wave to the same direction at two selected wavelengths, which has circumvented the critical limitation of strong wavelength dependence in the planar metasurface-based devices caused by the resonant nature of the plasmonic structures.
Date: September 23, 2016
Creator: Ding, Jun; Xu, Ningning; Ren, Han; Lin, Yuankun; Zhang, Weili & Zhang, Hualiang
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Annotating If Authors of Tweets are Located in the Locations They Tweet About

Description: Article presented at the Eleventh International Conference on Language Resources and Evaluation (LREC 2018). The study investigates spatial information of tweets whereby the authors present a corpus of tweets annotated with temporally-anchored spatial information involving the author.
Date: May 2018
Creator: Doudagiri, Vivek; Vempala, Alakananda & Blanco, Eduardo
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
Back to Top of Screen